Used Trumpf Tlc 1005 for sale (395)

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: SIEMENS, controller model: 840D, This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information. Additional equipment • HERDING Fume extraction in working area: 2000 Nm3/h • Cooling unit • Automatic sliding door "CE" • Automatic two-level redundant working range protection "CE" Machine Benefits Technical Machine Benefits • Cnc automatic workpiece scanning • Cnc automatic height detection • Table for laser cutting: 4000x2000 mm • Laser source: truflow 4000 watt (co2) • Dynamic optics for thin materials focus distance: 155 mm Giodpfjyaizcsx Afnon • Dynamic optics for thick materials focus distance: 240 mm • Optics calibration device Extra Information Working range X: 4000 mm Working range Y: 2000 mm Working range Z: 750 mm 3D cutting head B = 135°, C = n x 360° Partition wall for 2 side operation CE certification 3D Programming Module TruTops Cell Automatic Laser status indicator light

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 15,907 h, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 3000 Control unit: B&R APC 910 Connected load: 33 kVA Approx. machine weight: 7,800 kg Control unit ON counter: 2,472 h Operating hours: 15,907 h Laser ON counter: 32,927 h Laser ON: 7,790 h Special Edition Equipment - Integrated solid-state laser TruDisk 3001 with 1 LLK output - Fully automated pallet changer (with light barrier) Standard Machine Equipment - Enclosed machine frame with integrated components - Motion unit for ultra-precise machining - Drives with maintenance-free three-phase servo motors - Sheet support accessible from both sides - Enclosed beam guidance via laser light cable (LLK) - Fully integrated cooling unit for laser and machine - Integrated control cabinet - Accompanying extraction system - Slag drawers - 19" touch color display - Power supply TruDisk via machine - Work area lighting - Positioning laser diode - PierceLine - FocusLine Giedjyffmxjpfx Afnsn - NitroLine - Transport and assembly device - Copper cutting kit (includes cutting data) - Brass cutting kit (includes cutting data) TRUMPF Laser - LLK as per standard layout (laser directly beside machine) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Head - Universal cutting unit - Single-head cutting strategy - Protective glass for lens protection - ControlLine: height regulation and detection of sheet metal edges Control System - Simple drawing module - Easy workshop programming - Fast repeat production - Control B&R APC 910 - Integrated TRUMPF technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - FastLine - Microweld - Teleservice via internet - Microjoint - operation via control panel - Adjustable dynamics Data Transfer - RJ45 network connection and USB interface Safety - CE marking - Compact dust extraction unit - Machine enclosure with certified viewing windows - Motorized front door and rear opening - Enclosed machine roof

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 56,000 h, control type: CNC control, degree of automation: automatic, laser source manufacturer: trumpf, laser source model: truflow, laser hours: 24,000 h, laser power: 7,000 W, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Working Area Max. working area X: 4,000 mm Max. working area Y: 2,000 mm Gsdpfx Asx S Ecbefnjin Max. working area Z: 115 mm Laser Laser power: 7,000 W Maximum sheet thickness (steel): 30 mm Maximum sheet thickness (stainless steel): 30 mm Maximum sheet thickness (aluminium): 25 mm Control System Control: Siemens Sinumerik 840D SL MACHINE DETAILS Operating Hours Laser hours: 25,757 h Machine hours: 54,881 h EQUIPMENT Machine PierceLine FocusLine NitroLine PlasmaLine Cutting Head Cutting head with 250 mm lens Universal quick-change unit (UTI) with system bus LensLine with condition monitoring ControlLine: height setting and sheet edge detection Automatic nozzle changer High-speed head Water jet cutting head (Cooline) Laser CO₂ TruFlow 7000 laser with optimized standby mode Maintenance-free turbo-radial blower High-frequency excitation TASC laser control Laser power adjustment Laser logbook function Control ContourLine FastLine FlyLine Microweld AdjustLine CE marking Dismantling and loading to be quoted separately.

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec X-axes 600 mm 200 mm Gisdjppdpcepfx Afnsn Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,928 h, This 3-axis TRUMPF TruLaser 5030 + LiftMaster was manufactured in 2010. It features a watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster aIf you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information. Gisdpfx Afjx E Ed Esnjn • Max. sheet size: 3000x1500 mm • LiftMaster Included • Resonator: 7000watt C02

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools Gijdpfx Afox Tii Ijnsn - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Gisdpfx Afjya U Twsnen Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h Gsdpfx Afsyb Rzyjnsin EQUIPMENT Automatic pallet changer FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,724 h, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. • X-axis speed: 90 m/min • Y-axis speed: 60 m/min Gedpex Urcgsfx Afnsin • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend • Multitool • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg Giodjx Uqzzspfx Afnen • X-axis working range: 2500 mm without repositioning • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: used, Year of construction: 2001, pressure 50 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg Gijdpfx Aevuz Nkjfnon dimensions of the machine ca. 2000 x 2100 x 2400 mm Equipment: - Controlled axes: Y1, Y2, X, R - Pneumatic die shift - Manual upper tool clamping - LAN network connection - 4 stop fingers, manually adjustable, foldable to the rear, pneumatically clampable - CNC control, operation at front left - 2-hand operation/foot switch - 2-hand operation / foot switch - Rear + side protective device Operating hours: 2,140.9 h Strokes: 6,837,706

Condition: used, Year of construction: 1996, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm dayligth 385 mm Godpfx Afoxabqbenjin ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: Giodjxacfmepfx Afnjn - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: used, Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm Godpfsxaa Urex Afnjin column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. Gjdsxcp Rbspfx Afnein * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) Gedpfx Afjx S H Uxsnsin - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: used, Year of construction: 2000, CNC press brake Manufacturer: Trumpf Model: Truma Bend V170 Year of manufacture: 2000 Giodpfxsx Di Hxs Afnsn CNC control: Delem Press force: 170 t Working width: 4 m Crowning system Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m without tools ä3226

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Gsdpfx Afex Tr S Sonjin Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t

Condition: ready for operation (used), - Used, fully functional control unit from Trumpf L 3030 laser cutting machine (year of manufacture 2001) Gsdpfx Asyh Rxvjfnoin - SW version V 6.40

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Giedpsq Ewi Asfx Afnsn

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control Gijdpfsd Aghgex Afnon -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Condition: good (used), Year of construction: 2010, Trumpf TruLaser 3030, Year of manufacture 2010 / Commissioned 2011, Control unit: Sinumerik 840 D SL, Working area: 3000 x 1500 mm, Pallet changer, Trumpf CO2 Laser TruFlow 3200, Quick-change cutting head system, Height control, Sheet outer edge detection, Lens cutting head with 130 mm lens, Gjdpfx Afoydc Nzenjin Lens cutting head with 250 mm lens, HighSpeed cutting package for rapid cutting of sheet thickness up to 1.5 mm, Network connectivity via ExtensionCube, Machine has been regularly serviced, Hose replacement has been performed, Resonator quartz tube replaced, Laser power: 3200 W Operating hours: 72,871 Laser on: 26,337 hours

Condition: good (used), Year of construction: 2015, machine/vehicle number: B 1202-0133, Offer 26020 Technical data (approx.): - Max. working length: 3060 mm - Max. pressing force: 106 t - Distance table/ram: 510 mm - Ram stroke: 350 mm - Stroke speeds: - Downward rapid approach speed: 200 mm/sec - Pressing speed downward: 1 - 15 mm/sec - Total drive power (approx.): 13 kVA - Required space (approx.): W 3500 x H 2800 x D 2100 mm - Weight (approx.): 8500 kg - Operating hours (read): 4225 h - Equipped with: - 6-axis CNC control DELEM DA - Two-hand control panel with foot switch - CNC-controlled crowning system - Back gauge with height adjustment and laterally movable gauge fingers Godpfx Afoyfq Tqsnsin - Hydraulic tool clamping WILA - Various tools (incomplete) - 2 mobile press brake tool trolleys

Condition: good (used), Year of construction: 2005, Offer 24116 - Technical specifications: - Sheet thickness with spacer up to 160 mm - Standard bevel angles: 20°; 30°; 37.5°; 45° - Bevel angle with special stripper: 55° - Max. bevel length, steel 400 N/mm²: 15 mm - Max. bevel length, steel 600 N/mm²: 9 mm - Max. bevel length, steel 800 N/mm²: 6 mm - Pipe processing from 30 mm inner diameter - Internal cut-outs from a diameter of 160 mm - Working speed approx. 1.5 m/min - Stroke rate approx. 250 1/min Gsdpfjyfnq Hsx Afnoin - Drive 400 V / 2000 Watts - Required space approx. W 550 x D 200 x H 300 mm - Weight approx. 19 kg - Wall mount included

Condition: used, Year of construction: 2010, Trumpf TruLaser 1030 – Laser Cutting Machine - B&R Automation PC 820 CNC Control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of manufacture: 2010 Technical Specifications: Working Area: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Maximum Material Thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminium: 6 mm Speed: - Max. cutting speed: 40 m/min - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ± 0.1 mm/m - Average positioning scatter: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 µm - Power stability: ± 2 % - Power distribution: TEM00 Compressed Air Consumption: - Standard cutting: 333 l/min - Air cutting: 500 l/min Electrical Data: - Drive type: maintenance-free three-phase motors - Connection: 65 kVA - Protection at 400 V: 100 A Dimensions & Weight: - Dimensions (W x H x D): 7396 x 2291 x 3287 mm Gsdpfx Afeyghm Djnjin - Total weight: 8850 kg