Used Trumpf Tkf 100 for sale (361)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, Due to a technical malfunction, bidding was occasionally impossible – therefore, a new auction! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by TRUMPF, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg Pgedpfoy T I E Iex Amnel MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connection power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Operating time of press beam: 15,396 h Operating time of hydraulics: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot, 8 m travel path) Vacuum manipulators CNC gripping station Double sheet detection Safety device BendGuard Lasersafe Spare parts: cable track, replacement vacuum plate, BWF fixators (machine feet)

Year of construction: 2015, condition: used, Power consumption 12,5 KVA Power factor 0,95 rated capacity 10 kW Output current 560 A eff output voltage 1500 V eff In our estimation, the machine is in like-new condition and can be inspected under power by appointment. - Includes various accessories Pgedpfx Aoy T Sc Dsmnjl Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 50 t, stroke length: 215 mm, Hydraulic press brake Pgodpjy T Hx Tofx Amnsl Manufacturer: TRUMPF, Type: TrumaBend V500 Year of manufacture: 2005 Technical data Manufacturer: Trumpf Type: TrumaBend V500 Year of manufacture: 2005 Capacity: 50 t Working length: 1250 mm Stroke: 215 mm Distance between uprights: 1040 mm C-frame overhang: 420 mm Installation height: max. 385 mm Working speed: 10 mm/s Return stroke speed: 220 mm/s Voltage: 3 x 400V Rated current: 21.5 A Connected power: 8.6 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 control system • Pneumatic die shifting • Hydraulic tool clamping, top and bottom, Wila/Trumpf • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Bend-Guard safety light curtain, front • Tool package: - Upper tool 202/K, straight, R1, H 120mm, L = 1,250mm, segmented - Lower tool EV/S W6/84°, L = 1,225mm, segmented - Lower tool EV005, W16/30°, L = 1,090mm, segmented - Lower tool V24/80°, L = 1,120mm, segmented All information is without guarantee. A live demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits • Oil cooler • Working width 2. 000mm Pgsdsx D Nkdepfx Amnel Extra Information Special Equipment: Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network No tools included

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 4,500 h, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 B26 Year of manufacture: 2017 Like new, only 4,500 operating hours! Technical data Manufacturer: TRUMPF Type: TruBend 3066 (B26) Year of manufacture: 2017 Bending length: 2040 mm Press force: 66 t Operating hours: 4,500 h (metered) Free clearance between uprights: 2364 mm Reach: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.60 x W 1.65 x H 2.40 m Weight: 5650 kg Equipment Psdpfxey Txdbs Amnjgl - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R - 3 backstops - TRUMPF upper and lower tool clamping system - Self-adjusting crowning system - Control: Delem T3500T Multi-Touchscreen 17" - Light curtain front BendGuard - Integrated TRUMPF technology data - Foot switch - Technical documentation - Tool package consists of: - Upper tool Trumpf OW201K, slightly bent, 86°, L = 1,250 mm, segmented - Bent upper tool, H 120 mm, R1/86°, L = 1,950 mm, segmented - Lower tool EV042, V10, L = 1,250 mm, segmented - Lower tool V24, 80°, L = 2,000 mm - plus various short tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 15 mm Sheet thickness copper: 4 mm Sheet thickness brass: 3 mm Laser power: 3,000 W Laser model: TruDisk3001 (4C) MACHINE DETAILS Control type: CNC Last documented maintenance: 10-12 Sept 2025 Operating hours (as of 09/2025): 53,082 h (currently approx. 54,000 h) Dimensions & Weight Space requirement: 9,300 x 4,700 x 2,200 mm Machine weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction system Operating manual Chiller + extraction system Pjdpfx Aey Rkz Hemnsgl Compressor not included Note: Transporting the machine requires 1 standard truck and 1 truck with a width of 3m.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: safety light barrier, TECHNICAL DETAILS Pgjdpfx Aoy Rk Uyemnjl Laser power: 4,000 W Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Sheet metal thickness, steel (max.): 20 mm Sheet metal thickness, stainless steel (max.): 15 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo-radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Maintenance-free three-phase AC servo motors Additional high-dynamic Xp-axis Cutting head quick-change device Laser cutting head with 5" lens and 7.5" lens Cutting gas pressure setting, programmable APC capacitive height control and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for producing smaller holes PMS plasma sensor Automatic sheet metal edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spraying device for safe thick sheet metal processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open control system based on PC, easy operation, online help, integrated e-shop, diagnostic function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light barriers, beam guidance completely encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s Pgsdpfxox S H Uxo Amnjl - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Pgsdpfxoy Tmcxo Amnsl Errors, prior sale and technical changes reserved.

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 Pjdpfx Aeu N I Erjmnegl - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Podpfxou Hxmze Amnegl

Condition: used, Year of construction: 2009, Technical details: Pgjdpfx Ameyuvcijnol Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 1991, Technical details: Pgedpfx Amoy Alw Hsnol pressure: 2000 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Psdpsyt I Axofx Amnegl Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: excellent (used), Year of construction: 2017, TruBend 5130, including Toolmaster, manufactured in 2017. Psdpey Tmnhefx Amnsgl 130 tons, 3 meters.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 37 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. Podpfx Amjx D D Hyonsgl • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: TRUMPF TASC 6000 (15") • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies Pedpjy S U N Rjfx Amnogl PierceLine FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Condition: ready for operation (used), TRUMPF Laser 17x E11V 060050840, used, in good condition, 100% fully functional, scope of delivery as per photos Pgedpfx Amoy Ntb Henjl

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Podpfx Amjy Ntbyjnjgl

Year of construction: 2013, operating hours: 19,392 h, condition: used, machine/vehicle number: 1683, (Beam in), TRUMPF CNC control, X-axis: 3,000 mm, Y-axis: 1,500 mm, laser power: 5 kW, loading and unloading table, chip/part conveyor. Podpfxsy T Ny Tj Amnsgl

Year of construction: 2010, condition: used, machine/vehicle number: B0605A0061, Control system: TRUMPF CNC, X-axis: approx. 500 cm, pressing force: 400 t, working length: 5,050 mm, weight: 34,000 kg. Pgjdpfx Aoy T Nytomnjl

Condition: used, Year of construction: 2008, machine/vehicle number: B0505A0232, operating hours: 22,320 h, (Hydraulic system activated), manufacturing number: F1028-F, pressing force: max. 170 t, stroke: max. 445 mm, operating pressure: max. 300 bar, weight: 12,200 kg, control system: TRUMPF CNC, X-axis: 3,000 mm, angle sensor. Pgodpfx Amsy T Nyyensl

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts Pgedpey D T S Uofx Amnsl - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Pgjdpfoy U Nrfex Amnsl

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 27,169 h, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V130 Year: 2000 Technical Data Brand: TRUMPF Model: TrumaBend V130 Year of manufacture: 2000 Operating hours: 27,169 h (read off) Press force: 130 t Bending length: 3050 mm Stroke: 365 mm Operating pressure: 340 bar Dimensions: approx. L 3.80 x W 2.40 x H 2.95 m Weight: approx. 13 t Equipment • Controlled axes: Y1, Y2, X, R • Movable support arms • CNC controlled crowning • Delem 2D graphical control • Hydraulic upper tool clamping • Pneumatic die displacement Pgsdpfx Amsy Ryfusnsl • Upper tool: straight 28°, R1.0, H 140mm, L = 3,050mm, segmented • Die V12/30°, R1, H 100mm, L = 3,000mm, segmented • Die V30/80°, R5, H 100mm, L = 3,000mm (6x500) • Die V60/80°, R5, H 100mm, L = 3,000mm (6x500) All information without guarantee. A demonstration under power is possible at any time in our showroom.