Used Trumpf Tc 5000 for sale (404)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Large format. Brushing table. Blasted for 59,000 hours. Laedpfxezdrnro Amrsc

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit Lasdpfx Aex D I H Demrec • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840D CNC, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, positioning accuracy: 0 mm, overall weight: 12,000 kg, total width: 4,700 mm, total height: 2,200 mm, product length (max.): 9,300 mm, table load: 700 kg, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 was manufactured in 2011. It features a working area of 3000 x 1500 mm and a laser power of approximately 5–6 kW. The machine is designed for high-performance industrial CO₂ laser cutting, providing stable and precise cutting performance for serial production. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 CO₂ laser cutting machine we have for sale. Contact us for further details. • Max. rapid traverse speed (X+Y): up to 140 m/min • Max. material thickness (mild steel): approx. 25 mm • Positioning accuracy: approx. ±0.05 mm • Load capacity: approx. 700–900 kg (depending on configuration) • General features: high-performance industrial CO₂ laser cutting system; stable and precise cutting for serial production; TRUMPF quality with long service life; suitable for steel, stainless steel and aluminium processing Laedpfxezcbuyo Amroc

Condition: ready for operation (used), Year of construction: 1998, punching force: 22 t, total height: 2,300 mm, sheet thickness (max.): 6 mm, overall weight: 13,800 kg, table width: 3,000 mm, table length: 1,500 mm, table load: 100 kg, controller manufacturer: TRUMPF, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working range: 3000 mm without repositioning • Y-axis working range: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar Lodpfx Aex Uqzzjmroac The machine is in working condition. It includes a large set of punches, dies, and tool holders. Dimensions Machine Depth 6000 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Press force: 230 t Lajdpfx Aozd Tkbomroc Bending length: 3060 mm Frame width: 2690 mm Stroke: 365 mm Control system: DELEM DA 65 Overhang: 410 mm Installation height: 535 mm Dimensions: 3660 x 2310 x 3100 mm Machine weight (approx.): 17,700 kg Equipment: - CNC control system Delem - Crowning - Wila tool holder - 1 bending aid - 2 support arms - Side protection doors - 2-hand foot control - Die shifting - 2 manually adjustable stop fingers - Controlled axes: y1, y2, x, r - Operating hours: 13,993 h

Condition: good (used), Year of construction: 2005, functionality: fully functional, Press force: 130 t Bending length: 3100 mm Frame width: mm Control system: DELEM DA-69TW Stroke: 365 mm Machine weight (approx.): 12,950 kg Accessories: - 2 support arms in front of the machine Laodpfozd Snxsx Amroc - CNC control system Delem - Crowning - Die shifting - Wila tool holder - Side protective doors - Light curtain - Controlled axes: y1, y2, x, r - 2 adjustable support fingers

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Lsdozcvx Tspfx Amreac Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: excellent (used), Year of construction: 2007, Operating hours are shown in the photos. Lsdpszcvwvofx Amrjac

Condition: excellent (used), Year of construction: 2002, 6 axles Lajdpszcvwcjfx Amrsc Operating hours approx. 50,000 hours.

Condition: excellent (used), Year of construction: 2002, Operating hours: approximately 39,000 hours. Ljdpjzcvvfefx Amroac

Condition: good (used), functionality: fully functional, Year of construction: 1985, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bosch, controller model: CC 300, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,300 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 16,800 kg, total length: 5,000 mm, total width: 5,000 mm, total height: 2,600 mm, Equipment: documentation/manual, We offer this good TRUMPF Trumatic 260 Rotation CNC punch, year of construction 1985. manufacturer: TRUMPF model: Trumatic 260 Rotation year of construction: 1985 condition: good category ID: 908 type ID: 1180 type: CNC punch If you have any questions or need more information, feel free to send us a message or give us a call. TRUMPF Trumatic 260 Rotation & Quicksharp Lsdpfsy Ax I Eox Amrsac ALL TOOLING INCLUDED • Punching Force: 250 kN (approx. 25-30 tons) • Footprint: L x W x H 5000 x 5000 x 2600 mm • Working Range (X x Y): 2500x1300 mm (plus optional repositioning) • Max Sheet Thickness: 6.4 mm • Max Workpiece Weight: 150-200 kg • Tooling: 10 stations (with 360-degree rotation of all tools) • Max Tool Diameter: 76.2 mm • Max Rotation Speed (C-axis): 360°/sec • Traverse Speeds (X/Y): Up to 90 m/min (X), 60 m/min (Y) • Control: Bosch CC 300 (typical) • Machine Weight: Approx. 16,000-16,800kg • Compressed air requirement: 6 bar • Motor Power Hydraulics: 7,5 Kw • Mains Connection: 380 volts, 50 Hz, 35 kVA

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,541 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details. Laedoza Uuhjpfx Amrec - Laser Type: TruFlow 3200 (CO2)- Laser Power: 3200 W- Working Hours (NC): 82,247 h (as of 04.05.2026)- Working Hours (Laser On): 80,633 h (as of 04.05.2026)- Working Hours (Beam On): 45,541 h (as of 04.05.2026)- Nominal Voltage: 400 V- Phase Configuration: 3~- Frequency: 50 Hz- Connected Load: 73 kVA- Control Voltage: 24 V- Main Fuse Protection: 125 A- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 20 bar- Compressed Air Connection: 7-10 bar- Documented Maintenance Issues (07.05.2026): White connectors degrading due to plasticizer loss; Laser power not reaching set value; Oil spray unit non-functional (not utilized); Cooling fan runtime limit reached (+500h extended); Filter mats worn out/need replacement.- Control System (Software Version): SINUMERIK 840D SL- Configuration: Standard configuration- CoolLine (Option): Not included- Cross Conveyor (Option): Not included- Fire Extinguishing System (Option): Not included- Integrated Leak Test (Option): Not included

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density Lajdjzarc Aepfx Amrec • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Fusing: 200 A Compressed air connection: 6 - 14 bar Laedpfezaqzkjx Amroc Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Condition: ready for operation (used), Year of construction: 1996, pressing force: 85 t, stroke length: 365 mm, overall weight: 9,050 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V85 Year of manufacture: 1996 Laedpeza Hxrsfx Amrsc Technical data Manufacturer: Trumpf Type: TrumaBend V85 Year of manufacture: 1996 Press force: 85 t Operating hours: 46927 h (metered) Bending length: 2050 mm Stroke: 365 mm Stand distance: 410 mm Motor power: 10 kW Dimensions: approx. L 2.70 x W 2.40 x H 2.40 m Weight: approx. 9050 kg Equipment: • Controlled axes: Y1, Y2, X, R, Z1, Z2 • CNC-controlled crowning system • 2D graphics control DELEM DA • Hydraulic tool clamping, top and bottom • Pneumatic die shifting All information is provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Lasdpfx Aewykccemrjc

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Laodjzfaaljpfx Amrsc

Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled digital, maintenance-free three-phase drives - Automatic re-positioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing tables, each 500 x 500 mm Lasdpfxeza Eyhj Amrsc - Sensors for both indexing tables - Punch slug extraction - Forming capability - Programmable punch tool lubrication - Programmable pressure foot - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster, adjustable + Scissor lift table + Re-positioning cylinder + Rotoscanner + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + additional clamping jaws, total of 4 + Chip conveyor with tilting container + Bulging detection

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw Laedpfxsza Eu Es Amrec + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2019, operating hours: 13,960 h, functionality: fully functional, X Working area max.: 2500 mm (without repositioning) Y Working area max.: 1250 mm Operating hours: 13,960 hours Control system: Bosch PNC-P Standard equipment Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamp - Indexing slide Punching head - Electro-hydraulic punching head - Rotatable moni-tool holder - Programmable clamp position - Tool length compensation - Slug extraction - Forming function - Mist lubrication of the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operator panel with 15" TFT color display - Program management - Integrated technology data - Remote support interface - Automatic shutdown - Production plan Data transmission - USB interface - RJ-45 network interface - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Two-beam safety light curtain - Rapid shutdown of drives Extended standard equipment - 1st stop pin (right, inside) Laedpeza E Ifefx Amrjc + MultiTool function + Thread forming function - Thread former breakage detection - Lubricant level monitoring + Additional clamping jaw + Sensor for indexing slide + Vibration-damped mounting + Chip conveyor with tipping container + Programmable support table + Brush tables + Loading and unloading aid for brush tables + Bulge detection + Documentation TruPunch 1000

Condition: good (used), Year of construction: 2017, operating hours: 48,888 h, functionality: fully functional, X Working area max.: 2000 mm (without repositioning) Y Working area max.: 1250 mm Operating hours: 48,888 hours Control system: Bosch PNC-P Machine - C-frame - Coordinate guidance - Linear magazine with 15 positions for clamping claws and tools - Hydraulic clamping claws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable pressure plate - 1st stop pin (right inside) - Dividing slide Lasdpfx Ameza E Husrec Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure plate position - Tool length compensation - Spray lubrication for the punch - Punch slug extraction - Forming function Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light curtains - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping claw - Foot switch for start - Bulge detection - Vibration-damped installation - 5 RTC cassettes with die holders

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Ljdpfx Aeza Eiijmrjac Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting machine TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Lodeza Daajpfx Amrsac Laser power: 4000 Watt Operating hours: 59821 hours Laser beam on: 36350 hours Standard equipment: Machine - Enclosed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Working area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the internet Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with certified viewing window door on the right - Sliding roof + Nozzle changer

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Lasdpfxoza A Hlo Amroc Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 12,113 h, pressing force: 36 t, Bending length [mm] 1020.00 Press force [tons] 36 Control system TRUMPF TASC 6000 Standard equipment Machine - Sturdy machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 3 axes X1, R1, Z1 Tool clamping - Upper tool holder, self-centering, manual clamping - Lower tool holder, manual clamping, hardened Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming Ledpfx Asza Dfismroac - Windows Xpe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen - Network compatible - Teleservice via modem Safety - Side-swinging safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes - Ergonomics package, including: * Comfort support table (front) * Comfort footrest * Work area lighting at the front (LED) - Productivity package, including: * Graphical workshop programming * Automatic Trumpf tool clamping * BendGuard safety device (with block laser) - Tool cabinet on the right