Used Trim Press for sale (14,350)

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit Gisdpfxsykawve Afnjn heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. Gisdpfx Asykawpefnon It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Gijdsykawcspfx Afnon Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Giedpfxsykavxe Afnjn Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), Xerox Iridesse Including: - OHCF (Oversized High Capacity Feeder) - Finisher for PFIM (without booklet-making functionality) - PFIM (Post Fuser Insertion Module) - EFI Fiery EX-P 6 (DFE – Digital Front End) - 6 Colours (including standard 4 colors: CMYK plus specialty dry inks) - Total counter: 5.5 million (For detailed meter readings, see photos) The Xerox Iridesse Production Press is a high-end digital color press designed for ultra-high-definition printing with specialty dry inks. Key product specifications: Print Speed: 120 pages per minute (ppm) for 8.5" x 11" or A4 paper size. Paper Weight Range: Supports media from 52 to 400 gsm (grams per square meter). Resolution: Ultra HD, with RIP resolution at 1200 x 1200 dpi, 10-bit; print resolution at 2400 x 2400 dpi, 1-bit. Godpsydkcpefx Afnein Monthly Duty Cycle: Up to 2,250,000 impressions per month. Average monthly image volume (AMIV): 225,000–475,000 impressions. Color Capability: 6-color print engine, standard CMYK plus up to two specialty dry inks (gold, silver, clear, or white). Dimensions: Approx. 4,135 mm (W) x 1,835 mm (H) x 1,114 mm (D) / 163" x 72" x 44". Toner: Uses High Definition EA (Emulsion Aggregation) toner. This press is ideal for premium commercial print jobs requiring metallic or clear effects in addition to traditional CMYK colors, making it a versatile solution for creative and high-impact prints.

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC Godpfx Ajyf Edwefnein - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 400 mm, installation height: 650 mm, operating speed: 7 mm/s, reverse speed: 55 mm/s, total length: 8,400 mm, total width: 3,100 mm, total height: 4,620 mm, power: 47 kW (63.90 HP), travel distance Z-axis: 300 mm, empty load weight: 90,000 kg, passage width: 7,210 mm, table width: 350 mm, - 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag Gedpfx Aswu Inlofnein - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Locking speed: 70 mm/sec Power needed: 380V

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 405 mm, installation height: 820 mm, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 7,360 mm, total width: 3,025 mm, power: 55 kW (74.78 HP), travel distance Z-axis: 420 mm, empty load weight: 60,000 kg, passage width: 3,760 mm, table width: 500 mm, 8 assen: Y1 / Y2 / X1 / X2 / R2 / R2 / Z1 / Z2 Bovenste hydraulische klemming Laserveilige beveiliging = u kunt snel tot 1 mm van uw werkstuk laten zakken en daarna overschakelen naar een lagere buigsnelheid Robuuste kantbank ram geschikt voor het verwerken van gereedschappen tot 300 ton per meter! Er is veel zwaar gereedschap beschikbaar Gereedschap is OPTIONEEL! Capacity: 640 ton x 4500 mm Backgauge: CNC Gedpsv Rwm Rjfx Afnsin Locking speed: 80 mm/sec Height: 5385 mm (4445 mm above floorlevel)

Condition: ready for operation (used), controller manufacturer: 2D touch, throat depth: 200 mm, operating speed: 11 mm/s, reverse speed: 80 mm/s, total length: 4,100 mm, total width: 2,320 mm, total height: 2,800 mm, power: 11 kW (14.96 HP), empty load weight: 8,500 kg, passage width: 2,050 mm, table width: 180 mm, speciale verlenging van 1000 mm voor een totale buiglengte van 3500 mm 3 assen: Y1 / Y2 / X achteraanslag van 1000 mm !! lvd-gereedschap Capacity: 100 ton x 2500 mm + 1000 mm Backgauge: CNC Max stroke: 200 mm! Max distance between table -- ram: 430 mm! Locking speed: 100 mm/sec Gsdpfxjx Enfrs Afnsin

Condition: ready for operation (used), controller manufacturer: Delem DA65W, throat depth: 410 mm, installation height: 450 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, total length: 4,980 mm, total width: 2,240 mm, total height: 2,840 mm, power: 11 kW (14.96 HP), travel distance Z-axis: 180 mm, empty load weight: 13,000 kg, passage width: 3,760 mm, table width: 180 mm, 7 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada bombation Capacity: 170 ton x 4230 mm Backgauge: CNC Locking speed: 100 mm/sec Giedsx Immtspfx Afnon

Condition: ready for operation (used), controller manufacturer: TS1 touchscreen, throat depth: 400 mm, installation height: 420 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, total length: 4,300 mm, total width: 1,800 mm, power: 5.5 kW (7.48 HP), travel distance Z-axis: 240 mm, empty load weight: 7,500 kg, passage width: 2,550 mm, table width: 90 mm, 7 axes: Y1 / Y2 / X / R / Z1 / Z2 / V wila / modufix / standard tooling sick laser security enlarged stroke of 240 mm enlarged depth of throat of 400 mm Gijdpfxjx Immye Afnjn Capacity: 80 ton x 3100 mm Backgauge: CNC Locking speed: 300 mm/sec Height: 3160 mm (with arm)

Condition: ready for operation (used), controller manufacturer: TS1, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, boven- en ondergereedschap van Wila 5 assen: X / X#39; / R / Z1 / Z2 vergrote slag van 265 mm Gedpfjx Imkfsx Afnoin Capacity: 50 ton x 2550 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: ready for operation (used), controller manufacturer: Cadman B + Touch, throat depth: 400 mm, operating speed: 11 mm/s, reverse speed: 113 mm/s, total length: 4,355 mm, total width: 2,525 mm, total height: 3,000 mm, power: 20 kW (27.19 HP), travel distance Z-axis: 300 mm, empty load weight: 6,500 kg, passage width: 2,050 mm, table width: 150 mm, 8 assen: Y1 - Y2 - X - X' - Z1 - Z2 - R - V Easy Form Lasermeetsysteem (EFL) Wila modufix gereedschap (boven- en onderhydraulische klemming) Gsdpfx Aex Imm Hjfnjin lasersafe beveiliging 2 verplaatsbare plaatdragers Vergrote opening van 500 mm!! Capacity: 80 ton x 2500 mm Backgauge: CNC Max distance between table -- ram: 500 mm!! Locking speed: 130 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Gjdpfewwvx Dex Afnjin Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Giedsv Srfwepfx Afnjn Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: good (used), functionality: fully functional, Year of construction: 1991, Used 2-meter press brake by Hammerle Model: AP 100 2100 Capacity: 2100 x 100 tons 3-point bending Upgraded CNC control (approx. 2005) Upgraded Pilz laser safety system Giedpfx Afsyfmmaenjn Includes tooling Year of manufacture: 1991

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Manufacturer: TRUMPF Model: TruBend 7018 Gsdpfxjyir Svs Afnein Year: 2008 Technical Data Make: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Pressing force: 18 t Stroke: max. 150 mm Bending length: 510 mm Frame gap: 422 mm Power supply: 5 kVA Space requirements: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - Integrated TRUMPF TASC 6000 CNC control - Safety light curtain at the front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-mounted, pivoting safety doors - Two-pedal foot switch, for both standing and seated operation - CE certification Tooling Upper tool: straight punch R1/86°, H 120 mm, L 500 mm, segmented Lower tool: V-die V6/84°, R 0.6, H 100 mm, L 500 mm, segmented All information given without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: good (used), input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Dough Divider and Rounder Record Automat Roll Press for dividing and rounding Dough input from 750 to 2550 grams 30 pieces / 25 to 85 grams per piece with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 690 x 580 x 1650 mm (W x D x H) Used machine Gisdpferhfp Uex Afnjn Delivery service Many more roll presses in stock!

Condition: like new (used), Year of construction: 2022, operating hours: 945 h, functionality: fully functional, total height: 4,100 mm, total length: 12,000 mm, total width: 6,000 mm, power: 50 kW (67.98 HP), input voltage: 400 V, Equipment: documentation/manual, Ecokraft Granulation Line Offered for sale due to increased production requirements, as we have invested in a larger machine. Please be assured that this machine is in excellent condition and ready to meet your production needs. Contact us for pricing. Technical details: 1 High-performance knife mill (45 kW) with soundproof cabin, type SMC 500/700 10 Spare standard rotor knives Godpfxeygm Ers Afnjin 1 Dust extractor, type SMU 45 (4500 m³/h) with discharge container (year 2023) 1 Double-screw hopper (6 m³) with 2 extraction belts 1 Dosing system RP 18 DUO (year 2023) 2 Pellet presses RP 18 (18.5 kW), 925 and 942 operating hours 1 Pneumatic lubrication system for 18 kg bucket 2 Central lubrication systems 2 Digital water dosing pumps (803/54 litres) 2 FT screeners and extraction belts 2 Big bag stands for fine product collection 2 Big bag stands for cooling 1 Electric control cabinet

Condition: good (used), functionality: fully functional, Year of construction: 2017, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40/1030 Year: 2017 Technical Specifications Manufacturer: BYSTRONIC Model: Xpert 40/1030 Year of manufacture: 2017 Press force: 40 t Bending length: 1030 mm Stroke: 200 mm Distance between uprights: 1060 mm Motor power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A upper tool holder • Height-adjustable ByVision Bending display with 22'' Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC interface for bending • Bend curve generator • Automatic tool overload protection • Rear sliding door with electrical monitoring • Oil cooler • Ergo foot switch • Upper tool, straight R1/30°, H 250mm, L 1,000mm, segmented Gisdpfx Aoyim Txjfnsn • Upper tool, gooseneck R1.5/85°, H 175mm, L 1,000mm, segmented • Lower tool V10/30°, H 55mm, L 1,000mm, segmented All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA65, bending force (max.): 300 t, working width: 4,300 mm, stroke length: 300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Gisdpfx Asydpxvsfnon Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, functionality: fully functional, Year of construction: 1989, control type: CNC control, bending force (max.): 400 t, working width: 8,000 mm, overall weight: 50,000 kg, Eccentric press from HACO, model PPES 70400, year of manufacture 1989. The machine has a nominal pressing force of approx. 400 tons and is suitable for various pressing and forming operations on sheet material. Equipped with a mechanical eccentric drive and robust construction, designed for industrial use. Suitable for production and assembly work in an industrial environment. Machine is offered in used condition. Gijdpfx Asyhxtzjfnen

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 40225, control type: CNC control, actuation type: hydraulic, bending force (max.): 225 t, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Gsdpfx Ajyhxtuefnein

Condition: used, functionality: fully functional, Year of construction: 1986, Hydraulic Press Brake Make: LVD Model: PPBL 135/40 MNC Year of manufacture: 1986 Godpfx Afoyilu Ionein Technical Details Manufacturer: LVD Model: PPBL 135/40 MNC Year: 1986 Usable bending length: 4000 mm Stroke: 120 mm Press force: 135 t Dimensions: approx. L 4.20 x W 1.40 x H 2.65 m Weight: 8.7 t Equipment • Motorized backgauge 500 mm • Motorized adjustment of bending beam via +/- buttons with digital display • Upper tool straight, H 100mm, R 0.65/30°, L = 4000mm, segmented • Lower tool 2-V die V 12/30° + V8/30°, L = 4100mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1977, Used machine Year of manufacture: 1977 Condition: Currently still in production Technical data: Plate size: 2200 x 1100 mm Max. opening: 315 mm Heating medium: Electric Pressing pressure: 2.7 kg/cm² Cylinders: 4 Including safety cable Dimensions: 2540 x 1220 x 1850 mm Weight: Approx. 2500 kg Location: Hesse Giedpfx Afsyig Hfonjn Availability: End of March 2026