Used Translation Stage for sale (3,110)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,917 h, load capacity: 1,600 kg, lifting height: 4,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, gearing type: automatic, battery capacity: 625 Ah, battery voltage: 48 V, DGUV certified until: 09/2026, fork length: 1,200 mm, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), Equipment: UVV, cabin, front guard, full service history, gripper hydraulics, head guard, lighting, pallet forks, We are offering this Jungheinrich EFG 216k SP G+E 440 DZ forklift, manufactured in 2019. EFG 216k SP G+E 440 DZ Equipment No.: FN597104 Year of Manufacture: 2019 03 Operating Hours: 2,917 h Maintenance: Annually (records available) Type: Electric 3-wheel forklift Year of Manufacture: 2019 Load Capacity: 1,600 kg Lifting Height: 4,400 mm Overall Height: 2,040 mm Fork Length: 1,200 mm Load Center: 500 mm Mast: Triple-stage - free lift Equipment: Side thrust, floor spot light, heater, 2x work lights at the front, non-marking tires, front, roof, and rear window, 2x steel doors, auxiliary hydraulics with 2 functions, Battery: 48 V / 625 Ah incl. Aquamatik Charger: suitable Warranty: none If you have any questions or require further information, please send us a message or call us. Dwodpfxozvcflj Ap Dsb

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm Dwodpfxjy N D E Aj Ap Deb 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21137, tank capacity: 50 l, usable tank capacity: 36 l, input voltage: 230 V, inner dimension width: 280 mm, inner dimension length: 600 mm, COMPLETE ORIGINAL DESCRIPTION IN THE IMAGE GALLERY Mobile Vibratory Finishing Machine EUROTEC TV25-M – Vibratory Deburring System with Noise Protection For sale is a mobile vibratory finishing machine, EUROTEC TV25-M, in a compact design. This machine is ideal for deburring, rounding edges, smoothing, cleaning, and polishing various workpieces. Technical data: Manufacturer: EUROTEC Innovation Model: TV25-M (TV25 compact) Mobile vibratory finishing machine with complete noise protection enclosure Gross volume: approx. 50 liters Net volume: approx. 36 liters Dodpozktcqsfx Ap Dswb Connected power: 0.5 kW Operation via 230 V (Plug & Play) Working container: approx. 600 × 280 mm Electronic control with timer Frequency converter integrated Integrated process water treatment Process water feed pump 3-stage process water cascade (70 liters) Automatic shutdown after processing time expires Highly wear-resistant polyurethane lining Integrated scraping edge Very quiet operation due to complete noise protection enclosure Equipment: - Automatic compound dosing unit (TV25-M ACD5) - Partition module for dividing the working container (TV25 TW-G) for simultaneous processing of multiple batches - 3 stainless steel sieve boxes (TV25-M Skxx) - Various grinding media (ceramic and plastic): more detailed description see images Advantages: - Complete system on a chassis – ready for immediate use - Compact design - Easy operation - Ideal for small and medium-sized series - Uniform and reproducible processing results - Robust industrial quality The machine is in excellent condition and has been used only a few times. It has been used exclusively in a professional setting. New price as of 15.03.2023: €19,885.53 net

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clearance between the columns: 640 mm, closing stroke: 640 mm, total height: 2,500 mm, total width: 2,400 mm, stroke length: 480 mm, total length: 7,500 mm, column diameter: 120 mm, ejector force: 240,000 N, ejector stroke: 145 mm, mold height (min.): 250 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 16,600 kg, clamping force: 4,600 kN, power: 31.5 kW (42.83 HP), workpiece weight (max.): 8 kg, pressure: 160 bar, Equipment: documentation/manual, BÜHLER GDM H-400B Version 6.0 – 460T Complete die casting cell for aluminum with automatic mold spraying and automatic pouring ladle Manufacturer BÜHLER Model GDM H-400B Version 6.0 Year of manufacture 1996 Condition The machine is complete, in good working order, and has been regularly operated. It can be inspected while running after prior arrangement of a viewing date. Description We offer for sale a complete aluminum die casting cell based on the renowned BÜHLER GDM H-400B Version 6.0 injection molding machine with a clamping force of 460 tons. BÜHLER has been recognized for many years as one of the most reputable manufacturers of die casting machines in the world. The GDM H-400B model is a proven design, known for its high durability, precision, and low operating costs. The machine offered is sold as a complete production cell including an injection molding machine, an automatic mold spraying system, and an automatic pouring ladle. This configuration allows for efficient and repeatable production of aluminum castings. The offer includes: Die casting machine BÜHLER GDM H-400B Version 6.0 Year of manufacture: 1996 Clamping force: 4600 kN (460 tons) DATACESS control Complete control cabinet Technical documentation Automatic mold spraying system ACHESON Dog1000FCT.1S-A Year of manufacture: 2000 Automatic lubrication and mold cooling Power supply: 3 × 400 V Control: 24 V DC The system ensures uniform application of the release agent, improves the surface quality of the castings, and reduces the production cycle time. Automatic pouring ladle Equipped with: Siemens SIMATIC HMI Touch control The unit automatically picks up molten metal from the furnace and dispenses the appropriate amount of aluminum into the injection chamber, ensuring high process repeatability and reducing material losses. Technical data of the injection molding machine Clamping unit Clamping force: 4600 kN Second-stage clamping force: 180–420 kN Moving platen stroke: 640 mm Ejector force: 240 kN Ejector stroke: 145 mm Mounting plates Fixed platen: 990 × 1165 mm Moving platen: 990 × 990 mm Distance between columns: 640 × 640 mm Column diameter: 120 mm Molds Minimum mold height: 250 mm Maximum mold height: 780 mm Injection unit Piston stroke: 480 mm Effective piston stroke: 455 mm Available piston diameters: 60–110 mm Maximum aluminum casting weight: up to 8.5 kg Maximum injection pressure: up to 1485 bar Hydraulic system Maximum working pressure: 160 bar Oil tank capacity: 850 liters Electrical parameters Connected power: 31.5 kW Protection class: IP55 Dimensions Footprint: 7.5 × 2.4 m Height: 2.5 m Weight: 16,600 kg Key advantages ✔ Renowned BÜHLER brand ✔ Clamping force of 460 tons ✔ Complete production cell ✔ Automatic ACHESON mold spraying ✔ Automatic pouring ladle Dwjdpfezg E Rfex Ap Dob ✔ Siemens SIMATIC HMI control ✔ Complete technical documentation ✔ High production efficiency and repeatability ✔ Possibility of producing medium and large aluminum castings Application The machine was operated in a production facility and is offered as a complete workstation. It can be inspected and its technical condition verified after prior arrangement of a viewing date. Availability The machine is available immediately. Loading and transportation arrangements can be made within Poland and throughout Europe.

Condition: good (used), Year of construction: 2015, operating hours: 2,000 h, lifting height: 8,000 mm, fuel type: diesel, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Djdozzl A Rspfx Ap Dewb Weights Empty weight: 3.550 kg Functional Lifting capacity: 680 kg Working height: 1.000 cm CE mark: yes Maintenance, history and condition Number of owners: 3 Technical condition: good Visual appearance: good Other information Emission level: Stage V / Tier V Delivery terms: EXW Latest inspection: 2026-07-01 Production country: US Surface type: Rough terrain Additional information Please contact Martyn Joosse for more information

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. Dwodpfjyug Hxox Ap Dsb The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,915 h, mast type: telescopic, color: other, Drivetrain Drive: Track Make of engine: Deutz Weights Empty weight: 7.500 kg Functional Lifting capacity: 230 kg Working height: 1.600 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Max. horizontal reach: 1400 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Dedezzl E Ejpfx Ap Dswb Latest inspection: 2026-09-01 Production country: US Additional information Please contact Martyn Joosse for more information

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Dedet Nhmhjpfx Ap Dswb

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series utilizes scroll technology, which involves no metal-to-metal contact between the compression elements; consequently, absolutely no oil is required in the compression chamber. This makes the system ideal for applications requiring completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compression elements have recently been overhauled or replaced. Total operating hours: 15,983 hrs (actual running time of the compressor since 2001). Controller hours: 99,527 hrs (time the control system was powered on). Runtime of individual scroll elements (compression stages) Operating hours Element 1: 735 hrs Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical Data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil-Free Air) Serial Number: ATI 502157 Maximum Operating Pressure: 8 bar(e) Free Air Delivery: 24.7 l/s Djdpezwmd Uefx Ap Djwb Rated Shaft Power: 14.8 kW Rated Shaft Speed: 1500 rpm Gross Weight: 590 kg Year of Construction: 2001 Control System: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "A one-stop solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, operating hours: 2,963 h, axle configuration: 4x4, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 10.050 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.000 cm CE mark: yes History Number of owners: 2 Other information Emission level: Stage V / Tier V Dwodpfszzl D Isx Ap Deb Delivery terms: EXW Max. horizontal reach: 1100 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-08-08 Production country: IT Additional information Please contact Martyn Joosse for more information

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 Dwjdpfex Unpvex Ap Dob The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. Dwedpfjzcf Dlsx Ap Djb First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: new, Year of construction: 2026, machine/vehicle number: 2642110, fuel type: diesel, motor manufacturer: Volvo TAD882GE-SV, General information Field of application: Construction Weights Empty weight: 3.840 kg Functional Generator capacity: 275 kVA Dimensions of cargo space: 424 x 120 x 230 cm CE mark: yes Other information Dedexbwxqopfx Ap Dswb Fuel consumption: 39.5 Liter per hour at 75% Load Generator: Stamford UCDI274K1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1800 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Dwedeztq Hxjpfx Ap Deb Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,890 h, mast type: telescopic, fuel type: diesel, Drivetrain Drive: Track Make of engine: Yanmar Weights Empty weight: 7.550 kg Djdpfxozzl Dnj Ap Dewb Functional Lifting capacity: 250 kg Working height: 1.400 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage V / Tier IV final Delivery terms: EXW Max. horizontal reach: 1200 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-09-01 Production country: JP Additional information Please contact Martyn Joosse for more information

Condition: new, Year of construction: 2025, total length: 7,500 mm, total height: 3,400 mm, total width: 3,800 mm, warranty duration: 12 months, inner dimension length: 7,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, 🧩 Custom-Built Solution This washing system is manufactured to order. We can customize dimensions, number of stages, heating power, pump configuration, and automation level according to your individual requirements. 🟦 Automatic 5-Stage Washing Machine – Modern Surface Preparation System Modern, fully automatic spray washing system designed for surface preparation of steel and aluminium components before powder coating or other finishing processes. Dwjdpfjxlzihsx Ap Dob The unit features separate treatment chambers, each dedicated to a specific chemical stage, ensuring optimal cleaning and pretreatment quality for every material. Equipped with top transport rails, independent liquid circuits, and precise control of temperature and process time, this washing system offers high efficiency, repeatability, and low operator involvement. Perfect solution for manufacturers seeking a reliable, energy-efficient and fully automated cleaning system for metal parts. 🔹 Technical Specifications - Working chamber dimensions: 7000 × 1500 × 2200 mm (L × W × H) - Overall dimensions: 7500 × 3800 × 3400 mm - Top transport: 3 rails 60×60×4 - Non-through chamber design - 5-stage process - Independent closed liquid circuits - Washing via pressure pumps and spray nozzles (side and top) - 4 tanks: * 2 heated and thermally insulated (for chemicals) * 2 for water / demineralized water - Tank capacity: 2500 L each - Heating power: 2 × 36 kW (electric heaters) - Total electrical power: 90 kW - 5 pumps × 3.0 kW, alternating operation - Automatic transition between washing stages - Adjustable temperature and process time - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Precise and repeatable washing of steel and aluminium components - Separate chambers and liquid circuits – no cross contamination - Fully automatic control and stage switching - Adjustable temperature and time per stage - Thermally insulated tanks for energy efficiency - Can be integrated with coating or production lines

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 4,248 h, load capacity: 3,000 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, cabin, lighting, pallet forks, Telescopic handler MERLO 30.16 K ROTO Year of manufacture: 2005 According to the hour meter: 4,248 hours 80 kW Deutz engine 2-stage hydrostatic transmission 15.8 meters lifting height 3 tons lifting capacity - Incl. forks - Hydraulic quick coupler - Auxiliary circuit to the fork carriage Dwjdpfxszl U U Do Ap Djb - Cabin with heater - Lighting system - All-wheel drive - 3 steering modes - Ready for immediate use - Incl. road registration (Netherlands)! Selling price: 26,500.00 EUR net Affordable delivery also possible! For an additional charge, also available with a new bucket or a new work platform!

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 140 l, color: blue, overall weight: 10,900 kg, lifting power: 4,000 kg/m, lifting height: 13,500 mm, tire size: 400/80-24, tire condition: 95 %, axle configuration: 4x4, number of seats: 1, emission class: euro3, mast type: telescopic, Year of construction: 2014, operating hours: 4,914 h, Equipment: air conditioning, all wheel drive, cabin, hydraulics, pallet forks, === KEY SPECIFICATIONS === Year: 2014 Operating hours: 4,914 h Max. lifting capacity: 4,000 kg Max. lifting height: 13.5 m Max. outreach: 9.46 m Drive: Diesel Transmission: Hydrostatic Four-wheel drive: Yes Steering modes: Front / Crab / All-wheel steer Stabilizers: No Cabin: Closed Heated cabin: Yes Fork length: 1,200 mm Tyres: Pneumatic (400/80-24) Engine manufacturer: Perkins 854E-E34TA Emission class: Stage IIIB Weight: 10,900 kg CE certification: Yes === HIGHLIGHTS === Dwsdpfx Ajyy Ipasp Deb Carefully selected from reliable sources with verifiable history CE certified with complete documentation Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition – fully checked, maintained, and tested by certified professionals. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price: €42.500 excl. VAT (EXW) Reliable machine from first owner with full maintenance history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE-certified, and ready for immediate use. Spare parts and professional assistance available on request. === DELIVERY === Crane loading available on request for smooth transport Flexible shipping options tailored to your destination and logistics needs All transport professionally handled by Collé Rental & Sales logistics team

Condition: used, power: 328 kW (445.96 HP), first registration: 01/2023, Specification: Category: Universal Waste Shredder Manufacturer: Komptech Serial/Reference Number: 481148 Designation: Terminator 5000 S Year of Manufacture: 2023 Operating Hours: approx. 889 hours Power: 446 HP / 328 kW Weight: 27,000 kg Emissions Standard: Tier 4 Final / Stage V. Equipment and Description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-shredding unit Armoured rollers ? new sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control Djdpfexqqfcsx Ap Dswb

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Djdpfxjzp Nknj Ap Dowb Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Dsdjy Ez Erjpfx Ap Djwb Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: excellent (used), mileage: 29,976 km, color: red, lifting height: 30,000 mm, Year of construction: 2013, operating hours: 2,485 h, Drivetrain AdBlue system: Yes Drive: Wheel Weights Empty weight: 7.490 kg Functional Lifting capacity: 3.000 kg Dimensions of cargo space: 970 x 255 x 395 cm Dwsdpfx Apjzzmmds Dsb CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Emission level: Stage V / Tier V Delivery terms: EXW Latest inspection: 2026-01-15 Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Ad blue - Hook blocks = Remarks = Böcker AK 35-3000 * 2013 * 2,485 operating hours * Euro 5 diesel engine * ​​35-meter hook height * 26.5-meter horizontal reach * 3,000 kg lifting capacity * Remote control * Includes man basket * 29,976 km * Inspection valid until January 2027 * Includes documentation and maintenance history

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Dodpfszfwm Nex Ap Dswb Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: good (used), Year of construction: 2017, operating hours: 445 h, lifting height: 4,000 mm, color: other, Drivetrain Drive: Wheel Weights Empty weight: 1.300 kg Functional Lifting capacity: 230 kg Working height: 630 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Dwodpfx Apszzl Aqj Deb Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2026-06-01 Production country: US Surface type: Slab Additional information Please contact Martyn Joosse for more information

Condition: used, Year of construction: 1980, machine/vehicle number: 267, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 615 mm, roller diameter: 630 mm, pivoting range: 10 °, actuation type: manual, total height: 2,100 mm, total length: 1,100 mm, total width: 1,400 mm, overall weight: 800 kg, table height: 1,020 mm, Equipment: lighting, rotational speed infinitely variable, Vertical band saw, manufacturer Kölle Type ST 63 Year of manufacture: 1980 Overhang: 615 mm Maximum cutting height: 320 mm Table size: 780 x 770 mm Table can be tilted +/- 10° Cutting speed continuously adjustable from 15 to 2300 m/min (3 gear stages) Band saw blade length: 4580 to 4740 mm Band saw blade welding device: IDEAL Halogen lamp Due to the large adjustable range of the cutting speed, the machine can be used for both wood and metal. Connection: 400 V, 16 A Weight approx. 800 kg Dimensions W x D x H: 1400 x 1100 x 2100 mm Available from November 15, 2026. Dedpfx Aozymyhjp Djwb