Used Transformer 200 Kva for sale (18,528)

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: NEF67TM3A, General information Field of application: Construction Weights Empty weight: 3.400 kg Functional Generator capacity: 176 kVA CE mark: yes Other information Fuel consumption: 39 liter / hour at 100% load Generator: Mecc alte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 500 l Transport dimensions (LxWxH): 3,5x1,75x2,2 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Kledpfet Hc H Rex Aaljp = Remarks = -Noise rating: 55 dB at 7m

Condition: used, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: E22I152978, fuel type: diesel, motor manufacturer: Cummins X3.3-G1, General information Field of application: Construction Weights Empty weight: 1.057 kg Functional Generator capacity: 38 kVA CE mark: yes Other information Fuel consumption: 7 Liter per Hour at 75% Load Generator: Stamford PI144 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 71 l Transport dimensions (LxWxH): 2,25x0,97x1,62 Production country: IN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery Kljdpfjtqcb Ijx Aalop - Control Panel - Steel canopy - Tank = Remarks = Warranty: 1 year for continuous use 2 years for standby use Surplus unused 2022 generator. 2 similar units in stock

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Cummins KTA50-G23, General information Field of application: Construction Weights Empty weight: 13.396 kg Functional Generator capacity: 1.875 kVA CE mark: yes Other information Fuel consumption: 291 Liter / Hour at 75% Load Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 6,017x2,59x3,33 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery Klodor Dblzopfx Aalep - Control Panel = Remarks = Warranty: 1 year for continuous use 2 years for standby use

Condition: new, Year of construction: 2025, machine/vehicle number: 7243910, fuel type: diesel, motor manufacturer: DC09 072A, General information Field of application: Construction Weights Empty weight: 3.550 kg Functional Generator capacity: 300 kVA CE mark: yes Other information Fuel consumption: 41 Liter per Hour at 75% Load Generator: Leroy Somer TAL046E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 990 l Transport dimensions (LxWxH): 3,98x1,53x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = Kedsrbgbcepfx Aalelp - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20240416039, fuel type: diesel, motor manufacturer: Cummins QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.255 kg Klodpfxeiwc Dbs Aalep Functional Generator capacity: 600 kVA Other information Fuel consumption: 80 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Transport dimensions (LxWxH): 4,508x1,6x2,5 Additional information Please contact Arjen van Dijk, Tijmen Pesselse, Kenny Bongers or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Weights Empty weight: 18.290 kg Functional Generator capacity: 2.500 kVA CE mark: yes Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Kodpsn An A Nofx Aalslp Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = - Control Panel

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Kjdpfeyvgf Dox Aalelp Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: excellent (used), AREVA 400 kVA electrical transformer station with main low-voltage switchboard (TGBT) Ksdeyr Aflepfx Aalolp Year 2006

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C18A2S400367, fuel type: diesel, motor manufacturer: Caterpillar C18, General information Field of application: Construction Weights Empty weight: 5.952 kg Functional Generator capacity: 715 kVA CE mark: yes Other information Fuel consumption: 107 Liter per Hour at 75% Load Generator: Caterpillar A3355L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1082 l Transport dimensions (LxWxH): 5,32x1,92x2,29 Kedpfeyvx S Dex Aaljlp Additional information Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: GST Schneider, Transformer Type 13GST108 -Power: 0.384 kW -Technical data: see photo of the nameplate -Motor protection switch: Telemecanique GV2-RT05 -Number: 2x transformer available -Price: per piece -Dimensions: 360/205/H115 mm -Weight: 12.2 kg/pc. Klodpfxjmch Tws Aaljp

Condition: excellent (used), mileage: 70,031 km, power: 169 kW (229.78 HP), first registration: 02/2010, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, suspension: air, total length: 11,100 mm, total width: 2,550 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electric window regulation, navigation system, power assisted steering, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Heated mirrors - Cabin - Refrigerator - Air suspension - Air-suspended seats - Metallic paint - Radio/CD player - Reversing camera - Side door - Pre-heating system - Toolbox - Power take-off (PTO) = Notes = Multi-purpose vehicle (motorhome?), in excellent condition, comprehensively renovated in 2021, only 70,031 km. Fully equipped kitchen with cabinets, countertops and range hood, water connection and refrigerator, LED lighting, wardrobes, air conditioning, 22 kVA generator, 4 hydraulically operated stabilizer legs, fully accessible roof with folding railings, pneumatically operated Clark transmitter mast (approx. 12 m high). Automatic transmission with 3 pedals, 3 seats, air conditioning, CPV, electric windows/mirrors, reversing camera, navigation system, 5-cylinder diesel engine, 90% tire tread, twin tires, trailer hitch, Dutch registration with valid technical inspection until October 5, 2026. = Further Information = Technical Information Number of cylinders: 5 Engine capacity: 9,290 cc Axle Configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 7,100 kg; Tire tread left: 90%; Tire tread right: 90% Rear axle: Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90% Kledsyvh H Rspfx Aalep Weights Curb weight: 14,450 kg Payload: 4,150 kg Gross vehicle weight: 18,600 kg Maintenance, History and Condition APK (Technical Inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: BX-JZ-01 More Information Please contact Arne Honingh for further details.

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,250 mm, installation height: 1,650 mm, reverse speed: 75 mm/s, total length: 7,100 mm, total width: 5,000 mm, travel distance Z-axis: 1,000 mm, load capacity: 4,000,000 kg, table width: 650 mm, 12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Passage between uprights: 4600 mm (2x) Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Bending length: 16200 mm Kedpfjyp Nydjx Aalelp

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland Kedpfx Aaoxvivqslslp

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW Klodpfx Aoypbgioalep

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyres type: polyurethane Front tyres condition: 100% Rear tyres type: polyurethane Rear tyres condition: 100% Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Kedpfx Aasyv Sl Relslp Pulse control, CE certificate,

Condition: new, Year of construction: 2025, machine/vehicle number: LX905981, fuel type: diesel, motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 3.524 kg Functional Generator capacity: 330 kVA CE mark: yes Ksdpfx Ajyvd Aajalslp Other information Fuel consumption: 48.4 Liter / Hour at 75% Load with fan Generator: Caterpillar LC5114J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Transport dimensions (LxWxH): 4,3x1,41x2,165 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1997, turning diameter 420 mm turning length 400 mm spindle tunring speed 5.000 U/min power capacity 44 kW bar material dia. 60 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Kedpeylp Awsfx Aalolp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Kedpjx D Dkxsfx Aaljlp Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), total height: 2,200 mm, total width: 1,000 mm, total length: 2,500 mm, passage width: 1,570 mm, power: 11 kW (14.96 HP), empty load weight: 2,100 kg, load capacity: 200,000 kg, movable cilinder Kjdpoygyxljfx Aalolp Max ram adjustment: 300 mm Drawningspeed: 9 mm/sec Workingspeed: 5 mm/sec Returningspeed: 10 mm/sec Max distance between table - ram: 760 mm Dimensions of the table: 1570 x 490 mm

Year of construction: 2024, condition: excellent (used), functionality: fully functional, laser power: 200 W, laser wavelength: 1,064 nm, machine/vehicle number: 202404170, laser type: fiber laser, laser source manufacturer: JPT, 200 w pulsed laser cleaning machine. DMK CL-2-H-200. Made by Demark. China. Air cooled. Portable. Only 24kg. Laser handheld head weighs only 1.3 kg. Extended fibre cable to 7m. Kledpfxsxbh U Aj Aalep Single phase 220v. Comes with extras 1x field mirror F254 50x protective lenses. 1xpowerful metal fan to redirect fumes 1xair compressor. It connects onto machine to create air flow cushion to protect optics inside cleaning head. 3x pairs of protective eye wear. Great for rust and oxidation removing in hard to reach places where media blasting can not reach . I used it only on a few jobs for a couple of months. Not viable to keep it any longer as I live in the rural areas where demand for such tech is low. Businesses center are too far.

Condition: used, This listing is for the Tecan Infinite 200 Pro Microplate Reader The unit is in full working condition and is ready for immediate use The Tecan Infinite 200 PRO is a multimode microplate reader — a laboratory instrument used to measure the intensity of light in biological and chemical assays placed in microplates (usually with 96, 384, or more wells). It’s widely used in life sciences research, clinical labs and drug discovery for quantitative analysis of samples Typical Uses Laboratories use this type of plate reader to: • Quantify DNA/RNA or protein concentrations • Run immunoassays like ELISA • Perform drug screening assays • Read fluorescence or luminescence signals from reporter gene assays Klodpfx Aasydqmzelsp • Monitor cell viability or enzyme activity

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,500 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 950 mm, spindle motor power: 72,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 4, This 4-axis BOEHRINGER NG-200 horizontal turning machine was manufactured in 2008. It features a maximum speed of 4500 rpm and a swing diameter of 290 mm. The machine is equipped with two turrets, each capable of holding 12 tools, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER NG-200 machine we have for sale. Contact us for further details. • Machine configuration: 2 turrets at the top (boven 2 revolvers) • Drive power (100% ID): 60 kW (2 × 30 kW with counter spindle) • Drive power (40% ID): 72 kW (2 × 36 kW with counter spindle) • Drive torque (100% ID): 300 Nm (2 × 200 Nm with counter spindle) • Drive torque (40% ID): 360 Nm (2 × 240 Nm with counter spindle) • Spindle bore: 65 mm • Spindle diameter (front bearing): 120 mm • Spindle nose (DIN 55026): A6 • Chuck diameter: 200–250 mm • Swing diameter: 290 mm • Resolution Z-axis: 40 nm (2 nm interpolated) • Rapid traverse speed Z: 25 m/min • Max. feed force Z: 8,000 N • Distance between main and counter spindle: max. 1034 mm • Max. torque C-axis (left/counter spindle): 200 Nm • Max. speed C-axis (left/counter spindle): 300 rpm • Input fineness C-axis: 0.001° • Number of tools per turret: 12 • Max. driven tools per turret: 12 • Drive power driven tools (100% ID): 5 kW • Drive torque driven tools (100% ID): 20 Nm • Speed range driven tools: 1–4000 rpm • Coolant pump capacity (machine with two turrets): 80 l/min • Hydraulic pump capacity (machine with two turrets): 19 l/min • Electrical connection load (machine with counter spindle): 85 kVA • Control unit: Height-adjustable operating panel with 10.4" TFT display • Controller: Siemens Sinumerik 840 D Klodpfx Aaoyvvd Relep Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Kledpfx Aoytrzfoaljp Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Condition: like new (used), functionality: fully functional, Very nice mobile paper cutting machine for sale. Heavy-duty construction with hydraulic clamping. Can store up to 99 jobs, equipped with light safety curtains and cutting guide light. LCD screen, single phase 230 volts. Complete with extra knife, cutting strips, tools, and manual. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: Netherlands). Regards, Henk Hoos. Ksdpfx Aeyvhryoalolp

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v Klodpfoyhc Swjx Aalop - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO