Used Transfer Hot Press for sale (40,300)

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Kdsdpsv Umm Ijfx Aaceu Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 11522-20, total width: 2,250 mm, total length: 16,610 mm, total height: 3,039 mm, overall weight: 20,000 kg, temperature: 140 °C, pressure: 6 bar, working width: 1,330 mm, plate width: 1,400 mm, Technical Data: Size of platens 1500x3400mm Useful surface oft he tray 1330x3240mm Maximum size of boards 1250x3150 Specific pressure max 6bar Total press power max 3078kn Number of pistons 6 Kdedpfsuzgnpex Aacou Diameter of pistons D 145/250mm Filling of hyfraulic oil approx. 200 Liter Max. Operating termperature 140o C Weight of press approx. 14 000kg Load on foundation approx. 32N/cm2 PNEUMATIC: Air consumption press With 4 bar forming pressure approx. 950 Nl/cycle Air consumption pin system maximum 1800 Nl/cycle Required air pressure max. 6 bar Quality of compressed air DIN ISO 8573-1 Klasse/grade Pressure dev point: 4 Maximum particle size: 3 Maximum oil content: 3 ELECTRICKS Connected load E1: 61KW Nominal current: 115 A Supply fuse: 125 A

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B0xanbytvo, power: 35 kW (47.59 HP), TSF Ring die pellet machine Automatic bearing lubrication system Cooled differential Air conditioning Control cabinet Efficiency (depends on material) Kodpfxsq A Uhwo Aacsdu Engine power 35kw Different diameters of the pellet (selectable) B0xanbytvo Diameter of pellet press ring die - 8 mm Material requirements before adding to the pellet press - humidity 8-16% Motor principal cu inverter Electric parameter correlation board with numerical control.

Condition: used, Metal strip unwinding - wrapping machine for the production of fencing strips. Specification: Model: Clark's press equipment Maximum sheet thickness: 0.5 mm Kjdpfxoqla Uuj Aacsdu Other: speed is not adjustable Made in: England Available in two units. If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1978, functionality: fully functional, pressing force: 2,000 t, table length: 1,650 mm, table width: 2,000 mm, overall weight: 144,500 kg, stroke length: 1,400 mm, Equipment: documentation/manual, Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) Kdedpfsw R Ecdsx Aacou The press is connected and 100% complete. ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The D2243 press, with a capacity of 2000 tons, is equipped with a sliding table and designed for high-precision isothermal forging and forming of various materials. Key capabilities of the press include: - Sheet stamping and forming processes. - Isothermal forging of heated billets while maintaining a constant temperature of both the die tooling and the billet, ensuring high quality and uniformity of the products. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles involving heating, cooling, pressure build-up and release, dwell under load, and ejection of the finished product. - Molding of powder materials and production of large-sized products from plastics and composites in heated closed molds. Structural and operational features: - Working pair — ram and table, equipped with T-slots for mounting additional attachments such as heating plates included with the press. - Upper console (movable mechanism) with the main working cylinder mounted on it, moving along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table) for careful removal of finished products. - Hydraulic tank and control valve installed on the main cylinder to provide lifting and lowering of the ram. - Spool valves and pressure regulators controlling the press’s working cycle, installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram, installed on the frame. - The press is operated via a remote control panel. This press is ideal for industrial enterprises engaged in forging and forming metals, as well as processing composite and powder materials with high demands on temperature control and product quality.

Condition: repair required (used), Year of construction: 1990, functionality: not functional, power: 45 kW (61.18 HP), Briquetting machine, with some spareparts and 45kw motor. Kdedpfx Aaetur Ewecju

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery. Kdedpfx Asw Adkfjacou

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc) Kodjtndu Uepfx Aacsdu

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Kdodewqcbfjpfx Aacju Powered by air- 6 bar Measurments: by client demands

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 2000 tons Composite press hydraulic (isothermal) Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) The press is connected and 100% complete. ----- Kdjdpfx Aasw Hridjcsu Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The press is connected For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal. The press is equipped with a sliding table. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product; - Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet; - Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds; - Sheet stamping and sheet forming processes. The press has the following working and structural units and assemblies: - Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press. - Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table). - Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering. - Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame. The D 2243 press is operated via a remote control panel. 27/08/2025

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Kdjdpfx Ajxgt Tzsaceu Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: P-1843, actuation type: hydraulic, controller model: Siemens Sinamics G110, bending force (max.): 80 t, overall weight: 5,500 kg, TECHNICAL DETAILS Kdjdpexlthcjfx Aacju Bending force: 80 t Lowering speed: 80 mm/s Safety distance: 1,500 mm MACHINE DETAILS Control: Siemens Sinamics G110 Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,150 x 2,700 mm Machine weight: 5,500 kg IP protection class: 54

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Opening height: 350 mm Press cylinders: 6 pcs. Press cylinder diameter: 85 mm MACHINE DETAILS Operating temperature: 90 °C Max. temperature: 120 °C Electrical data Operating voltage: 400 V / 50 Hz Connected load: 22 kW Heating capacity: 22 kW Hydraulic unit power requirement: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting press time Digital input and monitoring of pressing pressure Digital diagnostics and fault display Safety circuit with two-hand control Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold-anodized heating plates (Busse) Kedpjxnyqpofx Aacsdu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total height: 2,300 mm, installation height: 400 mm, total width: 1,620 mm, total length: 2,240 mm, pressing force: 61 t, table width: 450 mm, table length: 450 mm, overall weight: 3,800 kg, ram plate width: 160 mm, ram plate length: 160 mm, type of input current: three-phase, stroke length: 150 mm, input voltage: 400 V, Equipment: documentation/manual, DR. Fritsch DSP 515 Pressure Sintering Press Machine Type: Pressure Sintering Press Year: 2008 Condition: Very Good. Decommissioned Includes Manual Technical Specification Main Cylinders: 1 Cylinder Diameter: 160mm Kdjdpfxjv Rz Ifj Aaceu Cylinder Stroke: 150mm Piston Rod Diameter: 140mm Effective Pressing Surface: 201.1cm2 Auto Pressure Control: 60-603kN Internal Dimensions: 450 x 450 x 400mm Self Baking Electrodes Dimensions: 180 x 180 x 60mm Inner Width of Electrodes: 145mm Temperature Range: 0-1,100 Deg C Sintering Mould Height: 60-120mm Sintering Surface: 150cm2 Total Connected Load: 155kVA Total Supply Voltage: 3 x 400V 50/60cps Total Nominal Current: 3 x 224A Operating Voltage: 3 x 400V 50/60cps/ 1 x 230V 50/60cps Control Voltage: 24V DC Cooling Water Consumption: 120-150L/min Water Quality: Drinking Water Recommended Water Supply Temp: 15 - 25 Deg C Water Pressure: 2-4 Bar Differential Pressure: 1-2 Bar Compressed Air Consumption: Approx. 20L/min Air Pressure: 4-6 Bar Protective Gas Consumption: Approx. 300-1000L/h Gas Pressure: 1-5 Bar Dimensions: 2240x1620x2300mm Weight: 3800kg

Condition: excellent (used), Year of construction: 2015, Murata Muratec Wiedemann 'M2048TS' 200kN Punch Capacity Turret Sheet Metal Punch Press with Muratec CNC Control CNC Servo Motor Driven Ram; 1,250mm x 2,500mm Sheet Capacity (with no repositioning); Maximum Punch Thickness 6.35mm Mild Steel; Stroke Approx 160mm; 5.5kW Motor; 44 Number of Tool Stations x 4 Index; Steel Ball Table; Crash Sensor; Foot Switch Control; S/No. 14KX463570001. Modular Machine Guard Caging with Omron F3SJ Type Safety Light Curtain; Weight of Machine Approx 12,000 Kilos; Footprint Approx 3,800mm x 7,000mm; Plus Large Quantity of Tooling in (2) Steel Cabinets; Line Voltage 240V; Machine Voltage 415 Volt; Wiedemann Tooling. Ksdpfsxnb Ivox Aacsdu

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, BYSTRONIC XACT SMART 225/4100 PRESSBRAKE CAPACITY 4100 MM X 225 TON YEAR 2017 TOOLING FULLY GUARDED CNC CONTROL THIS MACHINE HAS JUST BEEN PURCHASED AND DUE WITH US IN THE NEXT WEEK . Ksdpfx Ajwxykasacjdu WE HAVE 2 MACHINES AVAILABLE IDENTICAL .

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, year 2005 stock no. 01930 specification 7 AXIS CNC 50 TONS X 2000 HYDRAULIC DOWNSTROKING PRESS BRAKE description TYPE HYDRAULIC DOWNSTROKING CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 Kdsdpfer Artqsx Aacou RETURN SPEED 100 SERIAL NO GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED price 38000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 000399, Heidelberg Printmaster PM52-5 Kjdpfx Aaexmbu Tscjdu Straight 5 colour NO PERFECTOR Pull lay control Autoplate Auto roller wash Alcolor dampening Baldwin refrigeration and recirculation Compact classic centre for ink and remote register control Lateral register Weko powder spray Age: 2005 Still under power and available immediately Price: Euro 42,000

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Kedpfx Aexnyg Reacodu Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: used, all stainless steel belt width 400 mm adjustable speed with outfeed belt mobile Kdodpfx Aaexnxpwoceu dimensions (l x w x h) : ± 2.200 x 800 x 1.500 mm

Condition: used, Year of construction: 1988, Amada Promecam ITS 5020 CNC Pressbrake With Promecam CNC MB Control Ksdpfx Aasxnb Ehjcsdu Maximum Tonnage 500 KN. Maximum Bending Length 2,000mm. Working Top Height 960mm. Intake 370mm. Maximum Stroke 105mm. Goose Neck 400mm. Sideplate Entry 1,690mm. Approx Speed 85mm/sec. S/No. ITS 050 20 107 (1988). With Assorted Tooling, Sick Safety Curtain & Foot Switches. Overall Dimensions W2,500 x D1,745 x H2,180mm. Weight 3,450kg.

Condition: used, Year of construction: 1988, type of input current: three-phase, power: 110 kW (149.56 HP), Used Amandus Kahl C35-780 Pellet Press Hydraulic nut with pump and hand pump 4 roll head 5 rollers head 5 new rollers Kdsdpfx Aaoqwyrwjceu New die and used die Various spare parts

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Kedpjt Uc Iqjfx Aacodu Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary Kdsdsxddw Ejpfx Aaceu This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake.

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand FANUC Model 180i-PB Movement Kdedpjxn Uxnjfx Aacju X-Axis Movement 2500 Y-Axis Movement 1270 This AMADA EM2510NT was manufactured in 2005. A robust turret punch press, it features a FANUC 180i-PB controller, punching force of 200 kN, and can handle sheet thickness up to 6.3 mm. Its large working area includes X-axis movement of 2500 mm and Y-axis movement of 1270 mm. Consider the opportunity to buy this AMADA EM2510NT turret punch press. Contact us for more information about this machine. Application Types Punching