Used Tos Sn for sale (11,748)

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Prjdpfx Asxg H Hhja Eof

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves Podpfoxnkkajx Aa Eorf - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: used, Year of construction: 1997, feed length X-axis: 900 mm, feed length Y-axis: 450 mm, feed length Z-axis: 400 mm, X/Y/Z travels: 900/450/400 mm Table area: 1120x400 mm Max. table load: 600 kg Spindle taper: ISO 50 Total power input: 20 kVA Machine overall dimensions (LxWxH): 2560 x 3280 x 3355 mm Machine total weight: 4550 kg Control system: Heidenhain TNC 415 Machine incl. the following accessories: 4th axis, vice, toolholder, collets, probe, manuals Podpfx Aajxtaxde Esrf

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest Podovwgmaepfx Aa Eerf

Condition: excellent (used), Year of construction: 1982, Spindle diameter: 100mm Table: 1250x1250 Cross: 1600mm Predpfx Aajxz Dqao Ejf YOM: 1982

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150150900039, center width: 1,500 mm, overall weight: 2,820 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Centre distance: 1,500 mm Prsdpfx Aow Hwurja Eef MACHINE DETAILS Weight: 2,820 kg EQUIPMENT various lathe chucks

Condition: new, Quill of spindle for tool milling machines produced by TOS / INTOS Žebrak. When ordering, please indicate the exact type of machine. More parts available. Pjdsdx Ra Nopfx Aa Eerf

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Swing diameter over bed 800 mm, over support 520 mm Pjdpow Nvzzjfx Aa Eerf Distance between centers 3000 mm Spindle nose size 8, spindle bore 71 mm Speed range 11.2 – 1800 rpm Feed range 0.06 – 13 mm/rev Metric thread pitch 0.5 – 160 mm Tailstock quill travel 210 mm, mounting MK 6 Main drive 15 kW incl. rapid traverse, fixed steady rest with roller heads Quick-change tool holder Drehblitz with 2 cassettes, Taper turning attachment, HS reducing sleeve 3-axis digital readout Heidenhain ND 970 3-jaw chuck D 315 TOS, manual

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report Psdpfxev Hzqxj Aa Ejrf 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 10,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, SPECIFICATION: Longitudinal stroke “X” axis 10000mm + 1000mm for pick up the milling head Cross stroke “Z” axis 1500 mm Spindle headstock vertical travel “Y” axis 2500mm Two re-circulation ball screw on vertical axis Controlled continuously in 7 axis Heidenhain iTNC 530M with alternative control smart NC cyborg TE 530 with mouse 1 x pcs Rotary table CES size 2000 x 2500 mm in specification Two floor plates 6400x1900mm, Prodexbgn Ispfx Aa Eof

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 250 mm, overall weight: 7,500 kg, saw blade diameter: 400 mm, cutting width (max.): 450 mm, power: 0.004 kW (0.01 HP), Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm Prsdpfx Ajri Nvvoa Ejf - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: 1 x 4-jaw chuck Psdpfsv Epk Dsx Aa Esrf 2 x steady rest 1 x travelling steady

Condition: new, New bellows (Führungsbahnabdechkungen) for tool milling machines produced by TOS / INTOS Zebrak. For enquiries, please indicate the exact type of machine. More parts available. Pjdpfodx Rfvox Aa Eerf

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Predpfx Aew N D T Sja Ejf Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: good (used), Year of construction: 2004, In good technical condition. GO 2004. CNC control based on an industrial PC. Measuring system: Tilting device for measuring the workpiece diameter with automatic corrections. Max. grinding length: 630 mm. Center height: 140 mm. Machine dimensions: Height 1600 mm, width 2300 mm, length 3750 mm, and machine weight approx. 3000 kg. Machine accessories Psdpfx Aowfnvwea Eorf Complete technical documentation for the machine DE Manuals for using the CNC control system CZ

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) Pjdpfx Aaelkgvbe Eerf accessories: coolant equipment, collet chuck incl chucks

Condition: excellent (used), Year of construction: 1976, Spindle diameter: 100mm Table: 1250x1250 Prjdpfsxv Sbisx Aa Esf

Condition: ready for operation (used), TOS Gear Hobbing Machine FO16 Maximum wheel diameter: 1,600 mm Gear width: 560 mm Maximum module: 16 Maximum workpiece weight: 7,000 kg Table surface area: 1,350 mm Turning speed range: 16–80 rpm Feeds – axial: 0.05–1.5 mm/min Feeds – radial: 0.25–6 mm/min Feeds – tangential: 0.13–4 mm/min Electrics – voltage/frequency: 380/50 V/Hz Total power requirement: 12 kW Machine weight approx.: 18.5 t Podpfx Aoxwl R Toa Ejrf Machine dimensions approx.: 4.3 x 2.0 x 3.2 m The machine includes one additional head, change gears, and arbors. Video of the machine under power available.

Condition: new, New electromagnetic gear coupling feeds X/Y/Z for tool milling machines produced by TOS / INTOS Žebrak FNG/FNGJ/FNGP series. For enquiries, please indicate the exact type of machine. More parts available. Podpjdx Rfiefx Aa Ejrf

Condition: used, functionality: fully functional, turning diameter: 500 mm, turning diameter over bed slide: 500 mm, turning length: 2,000 mm, SUI 50/2000 – swing diameter 500 mm, turning length 2000 mm Podpfx Aow N D Trea Esrf

Condition: new, New wheel 160 mm for tool milling machines produced by TOS / INTOS Žebrak. Available with or without hand crank available. Podpfxodx Rzvs Aa Esrf

Condition: good (used), functionality: fully functional, BUA 25/1000 Psdpfxewug A Ij Aa Esrf

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Prodpfxsk Nk I No Aa Eef

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Predpfx Aovzkzcsa Esf Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Pjdpek Nk Iwofx Aa Eorf