Used Tos Fn for sale (1,077)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: Lredpfx Amew Nmw Hsnol - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Lredpfsw Iu Nhex Amnel Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Ljdpfx Amsy Ed Suenjrl Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC426, spindle speed (max.): 3,500 rpm, table length: 850 mm, table load: 3,000 kg, table width: 850 mm, This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Machine Benefits Qualitative Machine Benefits • Precision control, very good condition Technical Machine Benefits • Diameter of the working spindle: 128 mm • Retrofitted in 2008 • Robust table design Extra Information Machine still under power // Machine was checked and refurbished in 2024: Ledpfx Amoy Altusnsrl ■ cleaning, technical inspection of the machine ■ replacement of the Heidenhain TNC426 control system ■ complete inspection of the electrical cabinet ■ replacement of damaged cables ■ repair of the control panel ■ repair of the complete geometry of the machine (geometric accuracy protocol on request) ■ inspection of the drives (new bearings for the X+Z ball screw bearings) ■ inspection of the headstock ■ inspection of the hydraulic unit ■ inspection of lubrication and reinforcement ■ new telescopic covers

Condition: good (used), TOS SUI 50/2000 lathe - Max. turning diameter: 560 mm Lrsdpey D Eclefx Amnjl - Distance between centers: 2000 mm - Spindle bore: 58 mm - Year of manufacture: 1990 Rapid traverse on longitudinal and cross slide

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits Lrsdpfxoy Althj Amnsl • Retrofitted in 2001 • Refurbished in 2024 • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Rotation over machine bed 500 mm Lrjdpfx Aorwd Hzomnol Rotation over support 320 mm Spindle speed 14 to 2240 rpm Machine is operational and in good condition

Condition: repair required (used), Year of construction: 1979, Table 1,120 x 1,000mm, spindle 100mm ISO40, X 1,200 Y 900 Z 900. Needs electrical rebuilding. Lrodjy R Uzqjpfx Amnel

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, SPECIFICATION: Longitudinal stroke “X” axis 10000mm + 1000mm for pick up the milling head Cross stroke “Z” axis 1500 mm Spindle headstock vertical travel “Y” axis 2500mm Two re-circulation ball screw on vertical axis Lrjdjy Sxbdspfx Amnsl Controlled continuously in 7 axis Heidenhain iTNC 530M with alternative control smart NC cyborg TE 530 with mouse 1 x pcs Rotary table CES size 2000 x 2500 mm in specification Two floor plates 6400x1900mm,

Condition: good (used), functionality: fully functional, Technical specifications: Clamping plate diameter: 1250 mm Max. workpiece diameter: 1400 mm Max. workpiece height: 1070 mm Max. workpiece weight: 6000 kg Crossrail stroke: 710 mm Working stroke of the slide: 720 mm Working travel of the crossrail support from the center of the clamping plate, left/right: 60/915 mm Two units available for purchase. Lrjdpjy Udilsfx Amnol

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, The machine is fully functional and operational, in very good technical condition. It is equipped with, for example, an angular head, angle plates, tools, etc. It features a Heidenhain 530 control system. Ledpfx Ajy Udhbjmnsrl

Condition: good (used), turning diameter over bed 430 mm Lrjdpfx Amjy Hxq Uonel turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates Lredpfx Ameygxy Usnjl -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: excellent (used), TOS SN500 SA, 1500 mm, Digital, Tooling Lrjdpfx Asy Auydomnsl

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º W-axis travel (quill): 800 mm Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Lrsdpjy Hgvrjfx Amnol Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Only available as a set Lredpju Tvdbofx Amnel

Condition: good (used), Year of construction: 1989, functionality: fully functional, Centre height: 250 mm Lrodpfjy Nx H Uex Amnjl Centre distance: 2000 mm Max. workpiece weight: 500 kg

Condition: good (used), functionality: fully functional, BUA 25/1000 Ledpfxjwug A Ij Amnsrl

Condition: excellent (used), Year of construction: 2001, x travel 1600 mm y travel 1000 mm z travel 780 mm - number of processing axes (excl parallel axes) 5 - X-axis travel 1600 mm - Y-axis travel 1000 mm - Z-axis travel 780 mm Lodoy Ez Elepfx Amnjrl - table surface (left-right) 1000 mm - table surface (front-back) 1000 mm - workpiece load (max) 6000 kg - - positioning/indexing 0.001 ° - - positioning/indexing 2.5 ° - - positioning/indexing 2.5 ° - spindle revolutions (max) 2500 /min - drive power 22 kW - number of positions 60 - number of store positions 2 - pallet length 1000 mm - pallet width 1000 mm - number of pallets 2 - space requirements -left/right- 6400 mm - space requirements -front/back- 6900 mm - total height 4000 mm - total weight approx. 26000 kg control HEIDENHAIN TNC 426 The machine is in very good condition and available immediately.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Lrjdsy Nxdyopfx Amnsl Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Lrsdpfoy Hq Npox Amnol Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Machine weight kg 13500

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm Lrodpfegayiwjx Amnol grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: used, height of centers: 250 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 500 mm spindle boring: 56 mm spindle retainer: Gr. 8 retainer taper tailstock: 6 MK spindle speed: 11,2 - 1400 rpm forwarding feed: längs/plan 0,027-3,8/0,013-1,9 mm/U thread pitch: 0,5 - 36 mm Lsdpfxeuritbo Amnjrl electrical connection: 380 V, 2 x 5,5 kW space needed: 3600 x 1250 x 1300/1600 mm weight: 3000 kg

Condition: excellent (used), functionality: fully functional, planing width: 500 mm, number of blades: 4, total width: 1,700 mm, total height: 1,800 mm, overall weight: 2,000 kg, total length: 2,200 mm, chip removal: 160 mm, extraction connection diameter: 160 mm, height adjustment type: electric, number of feed rollers: 3, number of planer blades: 3, pass-through height: 200 mm, planing height: 200 mm, table width: 500 mm, working height: 200 mm, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Lrsdpfswfihujx Amnel Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse Ledpfx Amjy Iwf Hjnorl - Motorized height adjustment - Machine light The machine is in very good condition.