Used Toothed Belts for sale (9,791)

Condition: used, Year of construction: 2006, workpiece height (max.): 150 mm, workpiece width (max.): 1,300 mm, Available immediately: our wide-belt sanding machine, BÜTFERING Optimat STO213. It is currently in working order and can be viewed at our facility. It features 2 sanding belts. The available sanding width ranges from 1300 mm. Tjdpfx Akj Agrcyjijd

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Tsdpfx Asz S Ufbjkisd Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Tedsz S Eidopfx Akijd Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V Tedpfezd Uzzsx Akied Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Tjdpfx Aozlcipekiod Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Todpe Aayf Usfx Akijd Equipped with an AL-KO dust extraction system (excluding filters)

Condition: used, Year of construction: 2023, Coalza Stainless Steel Modular Belt Elevators/Conveyors – Units Used Coalza stainless steel conveyor and elevator units, offered as shown in the pictures. Each unit is equipped with a white modular belt with cleats, an inclined conveying section, a geared motor drive, and transparent protective covers. These conveyors are designed for product transfer and elevation and can be integrated into a packaging or food-processing line. Coalza’s range includes modular belt elevators with profiled belts and horizontal loading and discharge ends, as well as L-type and straight elevating conveyor configurations. Depending on the configuration, the conveyor can be synchronized with a Coalza packaging machine using photocells. Coalza states that its conveyor belts are suitable for transporting food products. Manufacturer: Coalza Stainless steel construction White modular belt with cleats Inclined elevator sections and horizontal conveying sections Geared motor drives Transparent protective covers Tjdo Agq N Hjpfx Akisd Coalza conveyor, Coalza elevator conveyor, stainless steel conveyor, modular belt elevator, cleated belt conveyor, inclined conveyor, product elevator, food processing conveyor, food handling conveyor, packaging line conveyor, VFFS packaging line conveyor, product transfer conveyor, industrial belt conveyor, used Coalza conveyor.

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, Equipment: type plate available, Plastic modular belts/belt conveyors Condition: Used Year of manufacture: 2016/2017 Overall length: approx. 6500 mm Overall width incl. motor/feet: approx. 1950 mm Overall width without motor: approx. 1320 mm Conveyor width: approx. 1190 mm Conveyor height (height-adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Color: Light gray/Dark gray Including SEW motor (0.75 KW) with Movimot (speed adjustable) Including feet (height-adjustable) Stock quantity: 3 units Price per unit Tedps Ahkurefx Akied Internal article number: 2026021103 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly create a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. Todpfx Ae Adfddjkiod • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW Tjdpe Ahgkdjfx Akied - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Machine is immediately available Machine ran until a few days ago without problems in production Tedondcctopfx Akied but was very rarely used

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding shoe and finish sanding for coated surfaces. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Edge banding machine with a combination unit and electronic articulated pressure beam, with edge segments that can be switched on and off. Segment width of the pressure beam: 35 mm. Contact roller can be pneumatically adjusted, low wear due to a ribbed steel roller. Grain size compensation. Tsdpfjzqvmrox Akiod Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed controlled by a frequency inverter from 2 - 18 m/s. Belt feed can be infinitely adjusted via a frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimensions 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and fold-down outlet table. Preparation for vacuum blower. The belt is perforated, and connectors for an optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure beam engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the connection cable shown in the picture. Original paint, only touched up in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Tjdpfx Ako Aflwysisd

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Conveyor belt width 600 mm -Conveyor length: 2570 m -Voltage: 380V -Transport dimensions: 2600/690/H1225 mm -Weight: 120 kg Tedpfj Agnh Tjx Akied

Condition: good (used), Code: 0509 Brand: SOCOMEC Model: LNE 210 - CE Standard Belt sanding machine for wood, furniture, steel, aluminium, metals, plastics, etc. – CE Standard Work surface dimensions 2100 x 700 mm Manual table lifting by handwheel Todpfx Aks Agb A Isiod Belt width 150 mm Belt length 5950 x 150 mm Pulley diameter 200 mm Three-phase motor 4 Hp Suction inlet diameter 120 mm Overall dimensions mm 3100 x 1300 x 1700 h Weight kg 340

Condition: used, all stainless steel belt width : 650 mm flip-over 90-200 mm total dimensions: (l x w x h) : ± 2.100 x 1.300 x 1.450 mm Tjdpfx Ake Agvycjisd 3 x 400V, 50Hz, 0.5kW mobile

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of workpiece 970 mm - max. height of workpiece 160 mm - 2 units - 1) grooved rubber roller - 2) two metal rollers + shoe - power of unit I and II: 11 kW - total power: 12 kW - brake * from above: - metal roller, sliding - pressure roller - unit - metal roller, sliding - pressure roller - unit - metal roller, sliding * from below: - rubber roller, sliding - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 types of feed speed Todpfx Ajzxg H Sokiod - feed motor approx. 0.75 kW - working pressure 8-10 bar - diameter of dust extraction nozzle 2x160 mm - overall dimensions (L/W/H) 1600x1500x2000 mm - weight 1370 kg ADVANTAGES – Made in Italy – 2 units – Unpainted – Used grinder, very good condition Net price: 21900 PLN Net price: 5090 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2020, functionality: fully functional, Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Length of feed belt: 6804 mm Tjdpfx Akjzyl H Tsijd Length of incline belt: 11045 mm Gooseneck: 2168 mm Usable width: 1400 mm Belt width: 1500 mm Incline angle: 27.5° Drive power: 4.0 kW Conveyor speed: 0.23 m/s Electrical connection: 400 V Fuse rating: 8.9 A The bale press shown in the photos is not included in the scope of delivery and can be purchased optionally. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Todpfx Ake Agw Egjisd Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: used, plastic belt with flights Todpfx Ake Af Iyxeijd height of the flights 15 mm distance between the flights 100 mm belt width 400 mm outfeed height ± 1.250 mm infeed height : ± 900 mm total dimensions : ± 1900 x 1250 x 1550 mm mobile

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Todpfx Aez Rmxdokisd Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, conveyor belt length: 10,000 mm, conveyor belt width: 500 mm, conveyor belt speed: 1,250 mm/s, motor manufacturer: Rulmeca, Lightweight conveyor belt (2 pieces available) - unused galvanized Todpfxow S D Nro Akied with RULMECA 3 kW drum motor Belt: EP 250/2 3:1 with feed chute Emergency stop via rope pull switch

Condition: used, For sale is a wide-belt sanding machine from Hans Johannsen, with a table size of approximately 2600x900mm. Machine footprint: Length approximately 3800mm Width approximately 2000mm The wide-belt sanding machine is functional and in used condition, commensurate with its age. You are welcome to inspect it. Transfer in as-is condition, as inspected, without any warranty or guarantee. Available for pickup in 41334 Nettetal. Tsdpfxo Ad Rhue Akied

Condition: like new (used), Year of construction: 2018, Modular belt, belt length 2,450 mm, Kraus – used: Price ex works: only €3,950 (net), disassembled, packed, and loaded! Industrial conveyor belt with a robust, profiled frame design. Reliable and robust, it is suitable for: • Transport of molded parts, • Machine discharge of components for removal (integrated/partially integrated/self-contained), • Transport of various materials Manufacturer: Kraus Betriebsausstattung und Fördertechnik GmbH, AT-Klagenfurt Type: FB 90 MODUL Todpfx Ajz I Einokisd Year of manufacture: 2018 Technical data: Maximum total load capacity: 100 kg Conveyor speed: 2 m/min Belt length: 2,450 mm, overall length approx. 2,600 mm Frame width: 1,300 mm Belt width: 1,200 mm Height: approx. 920 mm Belt design: Modular belt 1" PP/grey FDA Drive: Gear motor, SEW 230/400V – 50Hz, IP54 Installation position: Floor Design: Frame: galvanized profiles with bolted cross braces Connection cables for connecting to a machine / Harting connector Installed signal cables for 2 x light barriers / Harting connector Original new price: €7,000 (net) Condition: Like new, scratches on the motor housing Operating hours: < 100 operating hours Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob Tsdpfx Ako Aba U Eoisd - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter