Used Tool Profiler for sale (40,268)

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted Iedpfx Aodz Srkoageat - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit Ijdpfey E N Hdox Aageat

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition Iasdjd E A I Nepfx Aagst

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Iedpfed Rmcmjx Aagjat Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Iodpfoxf Uq Eex Aagoat Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Good condition

Condition: used, Surface grinding machine BLOHM type HFS 6 make no.: 10493 year of construction 1973 Electro magnetic clamping plate 600 x 300 mm grinding length 600 mm grinding width 400 mm table longitudinal movement max. 650 mm transversal movement 350 mm distance spindle center - table surface max. 600 mm distance spindle center - magnetic plate max. 517 mm Clamping surface table 1020 x 300 mm grinding wheel diameter 300 mm grinding wheel width 50 mm grinding wheel bore 76 mm table longitudinal feed 2-30 m/min infinitely variable table cross feed 2-65 mm stepless electric cross feed 3 m/min vertical feed 0,001 - 0,020 mm per infeed pulse vertical feed 0,250 m/min grinding wheel speed 1400 / 2800 rpm. Motor power hydraulic pump 2,2 kW Motor power grinding spindle 5 / 6 kW Mains connection 380 Volt, 50 Hz. Total power 11 kW - automatic depth adjustment - hydraulic longitudinal table movement - grinding wheel dresser on the headstock - electromagnetic plate height 83 mm - coolant system adjacent, with magnetic filter in filter housing - grinding spindle circulating lubrication - adjacent control cabinet (800 x 500 mm) - swiveling control panel - operating instructions and spare parts manual space requirement L x W x H 3000 x 2200 x 2100 mm weight surface grinding machine 3000 kg weight switch cabinet 200 kg Iedpfxod Hbafj Aagjat good condition

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m Ijdjnzt A Hjpfx Aagsat - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual Iasdpfx Aaev Amryegst - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Iaedpfxsv R E Rdo Aagot Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Iodpjw A Af Iefx Aagsat Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control Ijdpewva I Hjfx Aagsat - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 Iaodpfxjdzp Tce Aagst - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. EROWA ER-070649 UPC chuck with ITS Chuck 100P. The chuck was mounted on a measuring machine and thus was not subject to load or contamination. The clamping plate is in very good condition and fully functional. Iodpfxey Rzx Ns Aageat Inspection possible by appointment. Shipping and inspection available!

Condition: good (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016093. Clamping force: 32,000 N. UPC dimensions: 320 x 300 x 64.5 mm. The UPC chuck is in good condition and fully functional. Inspection by appointment is possible. Shipping and inspection available! Ijdpfx Aajy Rzttjgjat

Condition: excellent (used), Tul-Kelch tool rack SK 40 Tool holder SK 40 48 slots for SK 40 tools Iasdpfx Aajy I T S Nsgjt Width 900 mm Depth 450 mm Height 1090 mm

Condition: ready for operation (used), Montronix TS100 Tool Monitor SN:T1000022A0964, used, normal signs of use, 100% functional, scope of delivery as per photos Iasdpfx Aei Eb R Aoagot

Condition: ready for operation (used), Montronix TS100 Tool Monitor SN:T1000025A0991, used, normal signs of use, 100% functional, scope of delivery as per photos Iaodpfxsi Eb R Hs Aaget

Condition: ready for operation (used), tool grinding machine working perfectly Iasdpfoyw N D Tex Aagst

Condition: used, Year of construction: 1998, measuring range X-axis 327 mm measuring range Y-axis 410 mm Table dimensions Ø230 mm table rotating 360 ° tool diameter 200 mm tool taper SK 50 Pneumatics 4-6 bar weight 900 N In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iodpfx Aajy Sbmvjgjat Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Cam switch assembly with 6 switching tracks, tool monitoring, process monitoring BALLUFF type BSW 493-6 K3 /06 Iaedpfxey Sbw Uo Aaget Year of manufacture: 1988 Number of cam switches: 6 Switching voltage: 230 Volts Switching current: 6 A Drive shaft: Ø 20 mm with 6 mm key - 6 mechanical cam switches BALLUFF - Cam length adjustable - Adjustment tool missing Enclosure dimensions (L x W x H): 240 x 185 x 140 mm Weight: 6.3 kg Good condition

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Mazak, controller model: Mazatrol M640, workpiece length (max.): 2,820 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 800 kg, table width: 510 mm, table length: 1,460 mm, overall weight: 6,100 kg, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 110 mm, tool weight: 18,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Mazak VTC 200B in very good condition for sale. The machine is fully operational and can be inspected under power at any time. TECHNICAL SPECIFICATIONS: Work Table: Table size 510 x 1,460 mm Max. table load: 800 kg Travel distances: X-axis 1,120 mm, Y-axis 510 mm, Z-axis 510 mm Rapid traverse speed: X/Y/Z-axis 30 m/min Feed rate: 1 - 8,000 mm/min Distance spindle nose to table: 180~690 mm Working spindle: Speed range 40 - 10,000 rpm Tool holder: CAT 40 Main drive power: 15 kW Max. torque: 98 Nm Tool magazine: Number of tool stations 30 Max. tool diameter: 80 mm (110 mm with adjacent station empty) Iaedpfoy Rarnex Aagot Max. tool length: 350 mm Max. tool weight: 8 kg Machine data (standard configuration): Total connected load: 22.7 kVA Machine weight, approx. 6,000 kg Machine dimensions (L x W x H), approx. 3.00 x 2.90 x 2.80 m

Condition: excellent (used), Number of knives 24 z= width 15/20 mm circle diameter 240 mm material Stahl HM Bore diameter 30 mm Iodpoywzwxjfx Aagjat

Condition: used, dimensions Auf Anfrage weight Auf Anfrage Available Auf Anfrage Iodpjyz Dfmefx Aagoat Various used spare parts or complete units, control systems and control cabinets for Weinig Univar (and others) always available. Please contact us. Sample pictures.

Condition: excellent (used), Diameter 145 mm Width 17 mm Bore 40 mm Number of knives 2+2 z= Iedpfxoyz Dfgs Aagoat material Stahl knife system WP

Condition: good (used), Number of knives 2 z= width 60 mm circle diameter 120 mm material Stahl WP Bore diameter 30 mm Iodpfsyiu R Ujx Aagoat