Used Tool Press Stumble for sale (45,316)

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Bedjx Emfkopfx Acvsda Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Bdjdpfxex Hgmwo Acvoa Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Bsdpfx Aceynkq Usvsda Submitting a bid obligates prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Mount 1 Manufacturer: EPPINGER Type: PRECI-FLEX Serial number: 5942-10 Speed: 4,000 rpm Mount 2 Serial number: 10686/11:01 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 300 x 200 x 120 mm Machine weight: 50 kg External reference: Pieper - Lot 17

Condition: new, Year of construction: 2026, For sale: the extremely robust pneumatic post drivers from Rhino Tool, USA. Previously sold on the European markets as RAKL, particularly in Germany. This indestructible machine is available in 4 models: PD55 25 kg PD110 50 kg PD140 63 kg PD200-5" 77 kg PD200-7" 80 kg All options such as special adapters/inserts, pneumatic centres, and grippers are available from stock. Bsdpfx Aow R U Ehocveda

Condition: excellent (used), For sale: Professional CNC tool measuring and presetting device by PWB Systems AG Switzerland. Bodpfxsyuqu Ts Acveda The presetter is used for precise setting of tool length and diameter before mounting in the CNC machine. This reduces machine setup time and increases machining accuracy. The device is equipped with a SMART optical system with a camera, enabling accurate measurement of the tool edge. Swiss-made equipment – very robust and precise construction. ⸻ Technical specifications • Manufacturer: PWB Systems AG – Switzerland • Model: Tool Master ER10 • Optical system: SMART camera • Measurement: Z / tool length • Digital display with control keyboard • Tool holder • Solid construction

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 Bjdpov Hchlefx Acvjda 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry Bedpfjyc Ig Aox Acvsda • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: good (used), Bookbinding press Lechner BP 1000 Bundling Press Fully operational, ready for production. Practically new. Originally from a government facility, never used for production. 380V power supply Push-button control Fast operation Hydraulic unit Adjustable clamping force Weight 250kg Bdsdjyrz Rmopfx Acvea Made in Germany

Condition: good (used), INVER-PRESS Tar/S90 Eccentric Press Bdsdpfxsyvi Ivo Acvea

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) Bsdpovzxpuefx Acvoda as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free Bodpfjvzb Nqjx Acvjda

Condition: used, CPM 9042-12 granulator with many spare parts Bdsdpfx Acew Saayovoa

Condition: used, Manufacturer: TOOL TEMP Bdjdeylaatopfx Acvea

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Bodpfxsx Eg Upj Acvjda Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Bdodsdwf Dbspfx Acvsa

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Type: TT-181 Bjdpfsx A Swqex Acvjda Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Manufacturer: Tool Temp Model: TT-181 Bdedpfx Acox A Swkjvea Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Circulation Medium: Water or Oil

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Bdodpjx A Sv Tefx Acvja Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: Bjdpjvf Hhysfx Acveda 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Used temperature control unit Bedpfx Asuuacfjcvjda Item number: 10636 Make Tool-Temp Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: used, diameter div. Bjdpoxyzxfsfx Acvoda number 44x tool adaptor SK 40

Condition: excellent (used), Year of construction: 1996, operating hours: 73 h, Complete equipment for orbital welding and bevelling of pipes in all kinds of materials and all kinds of thicknesses in diameter from 20 to 170mm for sale. Manuals and part lists are included. In addition to welding equipment, a TRI-Tool 206B and a Wachs SDB 103/3 bevelling machine are included. They will efficiently make all kinds of joints like V, J or U bevels. The equipment can be delivered free of charge "to the door" anywhere in Europa and up to 1 week of training is included. All three included welding heads are of the same type (original Dimetrics FFIP heads- Full Function In Place) with both oscillation and AVC. (Automatic arc length) All three welding heads each have their own feeder for 100mm wire spools. The equipment consists of the following: *1 pc Dimetric Gold Track 3 (hour meter shows 72.6 hours "weld time" and 1088 hours "stand by" *1 pc welding head FFIP Small for Ø20- Ø 50mm *1 pc ditto but Medium, for Ø 48 – 90mm *1 pc ditto but Large, for 100-170 mm Completely ready to weld with all cables and remote control The welding heads are in solid transport boxes. Bdedpoycvifsfx Acvja Furthermore; *1 case with Tri-Tool 206 B bevelling machine pneumatic drive, 2"-6" •very little used • Bevel pipes from 2" to 6" (60.3 to 168.28mm) • Wall thickness up to 22.23mm) *1 case with Wachs SDB 103/3 pneumatic drive Capacity from 1" to 3'" well used but in good working condition. Dimetric's equipment has welded approximately 70% of the world's nuclear power plants, - both due to precision, operational reliability and robustness. Dimetrics was also the first to be certified to weld hydraulic systems on aircraft. Dimetrics (now together with Canadian Liburdi) is still a leader in welding nuclear power plants. For example, "Framatome" is responsible for the construction of 13 new nuclear power plants in France - and they only use welding equipment from Liburdi - Dimetrics, now Gold Track 7. All welding heads can still run on the latest Dimetrics welding machines. My equipment is from the 90s, and I got it from a shipyard that had produced nuclear-powered submarines where this particular equipment was on standby, but was never used for anything other than testing and training. A new piece of equipment with only one welding head and the same functions (AVC and oscillation) quickly costs from the very cheapest some €75.000 and up- of course without bevelling machines. I bought the equipment for use on a job that never materialised (!), and because I had 4 other orbital machines from before, this was rarely used. Now I am stopping working with orbital welding after 50 years in the industry, and continue as a consultant and supplier. This gives me time to load the equipment into a cabinet trailer, connect it to my camper and deliver it anywhere. Price complete delivered anywhere in Europe, including up to 1 week of training, €20000 excl. VAT.

Year of construction: 2018, condition: good (used), Temperature control unit Tool Temp TT-181 Stock No.: 503646 Machine type/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Bedpfx Asxt Rfbecveda Year of manufacture: 2018 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: used, diameter div. number 40x tool adaptor BT 40 Bjdpfx Asww Nbxscveda

Condition: used, diameter div. number 40x tool adaptor BT 40 Bsdpfjww Nblox Acvsda