Used Tool Press Stumble for sale (57,530)

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm -Length: 2505 mm -Weight: 24 kg Hsdpfx Ajctvqpea Esg

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Hjdpfewbvmisx Aa Esg Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: D-017/99, This machine is an oil-hydraulic, column-type downstroke press. It is equipped with two main pistons to control the synchronous operation. Hsdpfowglkuox Aa Eog Application: Test pressing of cutting, punching, bending, and drawing tools

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Hedpfxexl E Nfe Aa Eeg Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Year of construction: 1998, condition: ready for operation (used), Pneumatic tan tool Schüco 293885, built 1998 Hodjd R S Hyjpfx Aa Ejg

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Hjdpfxokw Rbaj Aa Esg Front light curtain Siemem control Weight 12,5to

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Transfer in current condition as seen Hsdpjc Sqcrjfx Aa Esg -Tool for: press brake -Tool: 45° -Thickness: 25 mm -Total length: 600 mm -Total height: 195 mm -Weight: 20 kg

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Hjdpfsdzp Tcex Aa Ejg Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Tool trolley for bending tool, die, upper knife, upper tool, straight tool Hjdpjc Ui N Hefx Aa Esg -Tool trolley for the: Tool for a press brake -with several compartments -Dimensions: 1165/720/H1000 mm -Weight: 208 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, 6 pieces -Tool: for closing folds -Drawing: in the photos -Dimension: 20 x 70 x 495 mm Hedpjgwdpxjfx Aa Eeg -Price / fee: complete -Length total: 2970 mm -Total weight: 31.3 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm Hedpfxsgxgm Aj Aa Eeg -Weight.: 30.3 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Hedpfxsc R Ug Sj Aa Eeg -Tool for: press brake -Tool: 82° -Thickness: 25 mm -Edge length: 1039 mm -Total height: 162 mm -Weight: 26 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Hodpfx Aofcd Ikea Eeg -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake Hjdpfx Aasfz Rd Ao Ejg -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: mm -Dimensions: 60 x 120 mm -Length: 415 mm Hedpfectq Nqox Aa Eog -Weight: 10 kg

Condition: used, Year of construction: 1988, Technical details: pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t Hjdpfxjvmht Hj Aa Eeg dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit *

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, 630T press retrofitted in 2018 by FEINTOOL 800T Press Total force: 50 - 800 tons Vee-ring force: 40 - 400 tons Back pressure force: 20 - 200 tons Stripping force: 130 tons Ejection force: max 65 tons Slide stroke: 30 - 200 mm Vee ring stroke: 40 mm Back pressure stroke: 40 mm Die clamping area top: 1000 x 1000 mm Hedpfxox E N N Se Aa Eog Die clamping area bottom: 1010 x 1600 mm Rapid approach speed: max 120 mm/s Blanking speed: 5 – 50 mm/s Return speed: max 135 mm/s Power requirement: 160 kW Uncoiling line 5 rollers, 50–450 mm strip width Maximum thickness: 10 mm Hydraulic straightener with strip lifter

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Hodpfxjuqdxis Aa Esg Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Automation roll-off try with leveller

Condition: excellent (used), Year of construction: 2021, Food Tools CP-1H half sheet product press Serial: 6341 Hodporza Dujfx Aa Esg 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

Condition: like new (used), Year of construction: 1989, operating hours: 810 h, functionality: fully functional, machine/vehicle number: 892161, total height: 2,860 mm, sheet thickness (max.): 6 mm, total width: 2,425 mm, overall weight: 9,000 kg, ram adjustment: 61 mm, pressing force: 160 t, Here you have the unique opportunity to purchase a Feintool GKP F 160 that has seen barely any use. The machine has only 810 operating hours. As you can see from the photos, the machine is in excellent condition. We acquired the press in 2019, but, just like the previous owner, never put it into operation. The machine was test run without tooling at our facility and is fully functional. An on-site inspection under power is possible by arrangement. Technical specifications of the FEINTOOL GKP F 160 fineblanking press: - Maximum sheet thickness: 6 mm - Maximum sheet width: 210 mm - Total force including auxiliary functions: 160 t - Shearing force: 100 t - Hydraulic counterforce (upper bolster): 1–40 t - Hydraulic force of the ring blank holder (lower bolster): 12–50 t - Ejector force (pump pressure): 4–8 t - Hydraulic shearing force: 7.5 t - Pneumatic shearing force: 6.6 t - Slide stroke: 61 mm Hjdpfx Aajumigqj Esg - Maximum number of strokes: 72/min - Minimum number of strokes: 18/min - Motor power: 11 kW - Pump capacity: 4 kW - Air supply: 6 bar - Dimensions (L x W x H): 2380 x 1870 x 2860 mm - Weight of machine GKP F 160: 9000 kg

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Hsdpsu Dalyofx Aa Ejg

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm Hedpjvwgl Nofx Aa Ejg V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Hsdpfx Aasu U Nime Eeg Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Standard configuration Automation roll-off try with leveller

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Upper tools:60 spaces Lower tools:48 spaces Description :Sturdy steel architecture with concrete foundation :Right-hand installation :Upper tool storage with CNC rotary axis :Lower tool storage with CNC rotary axis :Push chain manipulators for upper and lower tools :Magnetic gripper system :Positioning monitoring Hjdpfoxxft Dox Aa Esg :CNC turning and transfer station for upper tools :Transfer station for lower tools :LENZE control system, linked to TruBend machine control system :Integrated into machine design :Control cabinet air conditioning up to ambient temperature 40 °C :Safety light curtain (vertical and horizontal) with fixed reflector

Year of construction: 2025, condition: new, length 3100 mm height 120 mm width 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on Request V-Openings: - 80.0 mm / 85° / R 10.0 with guide rollers Hedpsxxml Isfx Aa Eog - 50.0 mm / 85° / R 5.0 with guide rollers - 35.0 mm / 85° / R 4.0 - 22.0 mm / 85° / R 2.5 - 2x Mounting Screws incl. Link Chain