Used Threaded Bolt for sale (4,047)

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Bdedpfx Asyl U Tujcvja Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: good (used), Thread cutting machine, pipe thread cutter Bdedjb A Iyaepfx Acvoa -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. Bdedpfoh A S Htox Acvoa The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: like new (used), Threaded steel holder, Manufacturer KOMET, Type FG Bedpfx Aeyu Rrfjcvoda 1 x Type FG II 1 x Type FG III 1 x Type FG IV 1 pc. insert for FG IV

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown Bdsdpjyn Snhjfx Acvsa - Coolant system included - Available documentation Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Bjdpfjkhmgiox Acveda Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Bdjdopag Npjpfx Acvja Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece Bdedpepag R Rofx Acvea For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Bodetbawkopfx Acvsda Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: excellent (used), Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Bedpfsyr S Upjx Acvsda Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EAF266970118, with subframe 250, foldable. With RIDGID No. 815A automatic cutting head without jaws, item 277109. The machine was acquired for a larger project and has only been used sporadically since then. Bodpsytpfuofx Acvoda

Condition: ready for operation (used), Manufacturer: HECKERT Model: ZFWVG 250x800 Condition: Used Serial number: 262122/9 Stock number: FR1776 Working length: 800 mm Max workpiece Ø over bed: 500 mm Bdsdpfsywytrjx Acvea Max workpiece diameter over cross slide: 250 mm Spindle bore: 102 mm Machine weight: 3400 kg Description Equipment: - New electrical system - Spare gears - Operating manuals

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. Bdedpfx Acsmn Thhjvoa In top condition, like new.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Bdsdpfx Acjvk D Rpovsa Manufacturer SONE Type: 2000 . 230V .

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Bdedpfxoyl Ntpj Acvsa

Condition: excellent (used), Thread cutting steel (108141) Make Comet Bdsdoigqr Rjpfx Acvea Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees in wooden case

Condition: good (used), Technical specifications for the securing bolt: System: Elvedi Type: HRZ 15 Included in delivery: 1x securing bolt, used for cantilever rack Material color: galvanized Dimensions: 178 x 24 x 17 mm (LxWxH) Weight: 0.660 kg/piece For securing the cantilever arms against accidental lifting Currently in stock: approx. 350 pieces The stated price corresponds to the pickup price including VAT. Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Bedowdvzlspfx Acvsda Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro Bjdpeipxynofx Acvoda M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Bdsdpewgizdofx Acvja Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Bsdpfxoyf A U Hs Acvsda Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm Bdedpfx Acex I Agpovsa -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: excellent (used), thread dia. 36 mm Bjdpfx Ajyhq S Eocvoda

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Bdjdpfxstqlq Es Acvea Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: excellent (used), Tap for pipe thread Make May Type : R 3 3/4 inch Total length 185 mm Bdedpefhdwqefx Acvsa

Condition: used, Taps for pipe thread Before and finished Schneider R 2 3/4 inch Bdedpjdk Rdvofx Acvoa