Used Textile Machinery for sale (73,203)

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Godpfx Aiov N Eiqskebw

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated Gbsdpfszrzymex Aikjw - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70%. - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with step-wise control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled sum control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep-digger bucket volume: approx. 0.60 – 1.00 m³ 121126ä

Condition: good (used), Description: The machine is in good technical condition, and testing is possible upon prior agreement. The Wolf TSM 280 is a highly efficient rotary transfer machine that enables the execution of complex manufacturing processes on a single, extremely flexible production unit. Tailor-made. Compact. Precise. It can be used to process a wide range of workpieces, whether they are cold-extruded parts, tubes, turned parts, straight turned parts, or bar/coil material – the Wolf TSM 280 guarantees reliable and cost-effective production performance for many different industries. Thanks to its modular structure, the Wolf TSM 280 allows for individual process design – whether for a specific product or for an entire product range. A large number of additional units are available for implementing new processes. Short setup times and very good accessibility during tool changes allow a wide range of different workpieces to be manufactured on a single machine. The feed rates, spindle speeds, and thus the cycle times of the manufactured workpieces can be continuously adjusted. Gbedps Ai S N Eefx Aikjw

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Gbsdeyzruijpfx Aikjw Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

Year of construction: 2026, condition: new, functionality: fully functional, High-speed cutting. Precision feeding. Reliable performance. The SK MACHINERY XC70 is a high-speed automatic circular sawing machine designed for efficient and precise cutting of metal bars and profiles. With its advanced servo-controlled feeding system, high-speed cutting technology, and automatic material handling, the XC70 offers an excellent solution for companies looking to increase productivity and reduce manual operations. Its compact industrial design and competitive investment cost make it an attractive solution for small and medium-sized production facilities. KEY ADVANTAGES High-speed automatic cutting Cutting capacity up to Ø 70 mm round material Advanced servo-controlled feeding system Special gearbox design with backlash elimination High positioning accuracy Automatic three-station material loading system Contactless material feeding mechanism High-performance hydraulic system Reduced auxiliary cycle time User-friendly machine operation CUTTING PERFORMANCE The XC70 is designed for high-speed cutting of medium and low-carbon steel. According to the manufacturer's specifications, when cutting Ø 50 mm round steel into 50 mm lengths, the machine can achieve a stable cutting cycle of approximately 7 seconds. The feeding cycle time for a 50 mm cutting length is approximately 1.3 seconds. MATERIAL APPLICATIONS The machine is suitable for cutting: Medium and low-carbon steel Stainless steel Copper Aluminum alloys TECHNICAL SPECIFICATIONS Parameter Specification Model XC70 (XS70) Maximum round cutting capacity Ø 70 mm Saw blade diameter 285 mm Connected power 7.5 kW Cutting speed Up to 125 RPM (45# steel) Feeding control Servo-controlled Material loading Automatic three-station system Gbjdpfx Aij Ai Ul Rjksw WHY SK MACHINERY? SK MACHINERY provides more than just machinery. We offer professional support throughout the entire machine lifecycle: Machine sales and technical consulting Installation and commissioning Operator training Spare parts supply Technical service and after-sales support Our goal is to provide reliable industrial cutting solutions to customers throughout Europe. CONTACT SK MACHINERY For further technical information, pricing, and availability, please contact us. SK MACHINERY – Your Partner in Industrial Cutting Solutions.

Condition: used, Year of construction: 1987, operating hours: 30,463 h, functionality: fully functional, track width: 1,900 mm, number of previous owners: 1, Equipment: cabin, crane, low noise, RSTW, year of manufacture 1987 / Crane ASX II, 1998 Track width: 1.9 m Cabin on the right side Crane positioned in front of the cabin Four-wheel drive Equipped with a timber bunk Equipped with a trailer Gbsdozv N Dbspfx Aikew Equipped with rails and concrete slabs

Condition: used, Year of construction: 1995, operating hours: 37,000 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: crane, low noise, Well-maintained Wolf sorting truck. Being replaced by a new Baljer & Zembrod unit. Gjdpfx Aijzwd Dxokjbw Epsilon E380 crane. Concrete weights will be removed.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/1992, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 990 mm, total length: 13,200 mm, total width: 2,500 mm, total height: 990 mm, suspension: steel, tire size: 275/75R17,5, wheelbase: 8,500 mm, color: blue, = Additional options and accessories = - LEAF SPRING SUSPENSION - Toolbox = Notes = HEAVY DUTY TRAILER ETC 0027-01, 2-AXLE STEPDECK MACHINE TRANSPORT TRAILER WITH RAMPS AND STEEL SUSPENSION!! TRAILER AXLES!! Gedpfx Aszu Tg Djikjbw DRUM BRAKES!! STEEL SUSPENSION!! 8 TIRES!! OPEN BODY SIZE: LENGTH x WIDTH 12.60 x 2.50 x 0.99 M!! 2-SECTION RAMPS!! STEEL FLOOR!! MORE TRAILERS (ALL TYPES) IN STOCK FOR SALE (> 75 TRUCKS/TRAILERS IN STOCK!!) SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING, OR TRANSPORT? NO PROBLEM FOR US BECAUSE WE ARE A "ONE-STOP-SHOP" COMPANY!! PLEASE CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) YOU CAN ALSO VISIT OUR WEBSITE: ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further information = General information Year of construction: 1992 Axle configuration Tire size: 275/75R17.5 Axle brand: KASSBOHRER Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Dual tires; Max. axle load: 9000 kg; Tire tread depth left, inner: 20%; Tire tread depth left, outer: 20%; Tire tread depth right, inner: 20%; Tire tread depth right, outer: 20% Rear axle 2: Dual tires; Max. axle load: 9000 kg; Tire tread depth left, inner: 40%; Tire tread depth left, outer: 40%; Tire tread depth right, inner: 40%; Tire tread depth right, outer: 40% Weights Unladen weight: 6,600 kg Payload: 29,400 kg GVW: 36,000 kg Functional Body brand: TRAILOR ETC 0027-01 Loading platform height: 99 cm Condition Technical condition: good Optical condition: average Further information Please contact the Sales Department for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, Baljer & Zembrod Diameter Reduction Units • Used to reduce the diameter of logs over their entire length to a specified diameter (e.g., 60 cm). Gbodpfx Ajz R Iy Njikew • Cutter lengths: 420 mm to 1500 mm • Log lengths up to 7 meters • Log centering on the log’s center for maximum yield • Clamping device for the end faces of the log, with a rotary table; clamping frame is hydraulically adjustable.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). Used EBERT forestry semi-trailer, low-bed type Tvp: TLS 36 ST with VIN: W0985180080D17001. Self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS. First registration: 03/2008, Permissible total weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg. The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5, low-profile tubeless. Tire tread: 1st axle 9-12mm, 2nd axle 7-11mm. Axles: 2 x 10 tons. Axles with S-cam brakes and ABS, hydraulic dual-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drawbar eye. 24V electric generator with HD piston pump, oil tank, and 2 batteries allow remote-controlled functions with wireless operation. Brakes: Two-line brake system according to EC, with spring-loaded brake cylinders acting on the rear axles. With ABS. Lighting according to StVZO. Integrated into a recessed under-run protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth. The hydraulic forced steering is equipped as standard with a wireless remote control, so the driver can "steer" from the cab during tight hairpin turns and when maneuvering. Options included in the price: a. Yellow rotating beacon, rear, pluggable b. with 4 pull-out marker panels (red/white) with an extended width of 2,550 mm when retracted and 2,750 mm or 3,000 mm when extended. c. with electro-hydraulically operated access ramps. Upon request, we will provide you with a leasing or financing offer. Godpfxsz Engkj Aikobw Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further Information = Year of construction: 2008 Unladen weight: 9,000 kg Payload: 27,000 kg GVWR: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. Gjdpfx Asz Ea E Seiksbw _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Year of construction: 2018, condition: good (used), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control Gedpfsz Ea Itex Aikebw • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Also suitable for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimize material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter approx.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min Godpfxjz Ea I Tj Aiksbw • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Epson SureColor SC-F2100” production system. Item for sale: 1x Epson SureColor SC-F2100 Gedpfozh Dcvjx Aikobw We can easily configure the machine to your specifications. Feel free to contact us! Counter readings: Total: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Year of construction: 2007, condition: good (used), functionality: fully functional, Printing and Coating • 5 letterpress printing units • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling Godpfsztqlzjx Aikobw • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong color coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimizes intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section Gjdpfx Aoztqrnjiksbw • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2009, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,870 mm, total length: 13,880 mm, total width: 2,550 mm, wheelbase: 9,010 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles = More information = Year of construction: 2009 Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 7.680 kg Carrying capacity: 31.320 kg Godpfe Af Icfox Aiksbw GVW: 39.000 kg Registration number: OT-85-KH

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Gbedpfx Aieci Tvhskow Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: used, Trailers, construction equipment trailers -Handover: in its current condition as inspected -Note: Vehicle registration document missing, electrical wiring missing/damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, rim height 410 mm -Overflow device: Tap type ABV25. 1DZKE 2010 to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Empty weight: 650 kg Gsdpfx Aijn Uy Awsksbw

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Gjdpfxjx Hh A Hj Aikjbw Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: good (used), Year of construction: 2006, Main Features & Equipment • Unwinder with Web Guide Ensures precise alignment of the web material right from the beginning of the process. • Infeed Nip Unit Provides stable and controlled web tension. • Feeder System Gsdpfox Hh Euox Aikebw Ensures smooth, continuous transport and feeding for uninterrupted production. • Lamination Tower Enables film lamination for surface protection or special finishing effects. • Flatbed Die-Cutting Unit Suitable for high-precision die-cutting applications. • Rotary Die-Cutting Unit Comes equipped with: o Re-register system (ideal for pre-printed webs) o Die load cells for optimized pressure control and enhanced cutting quality • Matrix Stripping Tower Facilitates efficient waste removal for continuous operation. • Outfeed Nip Roller Stabilizes web tension before rewinding. • Rewinder Produces finished rolls for shipping or further processing.

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Gbodpjyt H R Iefx Aikow Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Year of construction: 2006, condition: good (used), Configuration • Unwinder • Register Control System • Flexo Unit (Ink / Varnish application) • Laminating / Cold Foil Unit • Die Cutting Unit • GEW UV Dryer • Slitting Unit • Rewinder _____ Machine Description The ABG Digicon 1 is designed as a modular finishing solution for digital and flexographic label production. The installed flexo unit allows varnish or spot colour application. Gsdpfx Aoynkwnsiksbw The laminating / cold foil module enables added-value embellishment. The die-cutting and slitting units ensure precise finishing and roll conversion. The semi-rotary functionality provides cost-efficient short-run flexibility, while full-rotary mode enables higher productivity. _____

Condition: good (used), Year of construction: 2016, Conveyor dryer for DTG : Fahrenheit Electric 6160 - Chiossi & Cavazzuti Hot air dryer in good condition, for all kind of digital/screen printing/transfer applications Year 2016 Delivery not included, we can ship everywhere, ask for a quote Caractéristics : MAX POWER: 49 KW APPLICATION FIELD : DTG, screen printing, transfer printing DRYING by HOT AIR circulated (very high power) DRYING AREA: 6000 x 1600 mm Godpfx Asxzq Tbsiksbw PRODUCTION MAX : 600 pieces/h

Condition: good (used), Year of construction: 2006, web width: 330 mm Corona 8-color Gjdjxzr Dzspfx Aikobw UV Cold In Production etc.