Used Teka Filtoo for sale (29)

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Tjdpfx Ajxvpumjkisd Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW Tjdpfsfrzt Ujx Akied weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg Tjdpfxskm Ryno Akijd mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate Todpfx Akehp S Troied - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.