Used Tb 13 5 for sale (64,857)

Year of construction: 1985, condition: good (used), Benchtop drill press TB 15 Spindle speed 360 - 3600 rpm via V-belt pulley Spindle mount MK 2 with intermediate table Power supply: 400 volts Nljdpfjk D Hrdox Acmec

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input Nlsdpfx Acjyuzcusmec * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: new, empty load weight: 230 kg, maximum load weight: 520 kg, overall weight: 750 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, tire size: 175/70R13, Drop-down trailer single-axle unbraked Unsinn AS826-13-1550. The platform of this car trailer is tilted so that motorcycles, quad bikes, ATVs, sweepers and similar vehicles can be easily loaded. The tiltable car trailer is equipped with a perforated railing, support wheel, lashing eye and tubular drawbar. Nsdpfxeq Nm A Nj Acmslc Accessories include a motorcycle stand rail, motorcycle rocker, tarpaulin and frame, side wall attachments, lashing eyes, motorcycle lashing strap, tool box, anti-theft device and lashing straps.

Condition: new, *IMMEDIATELY AVAILABLE* Nledpfeyyw I Ssx Acmec Take advantage now! We are clearing out for our relocation to a new site! There are unique items from our showroom at unbeatable prices! Including electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,020 kg • Payload: approx. 2,480 kg • Internal dimensions: 361 x 185 x 35 cm (L x W x H) • Overall dimensions: 514 x 200 x 118 cm (L x W x H) • Loading edge height: approx. 72 cm • Tires: 195/50R13C steel rim • Brakes: Yes • Jockey wheel: Yes, automatic • 100 km/h approval: Optional! • Including vehicle documents Vehicle structure: • Floor: Full steel floor, massively reinforced • Sidewalls: Double-walled anodized aluminum, foldable and removable on all 4 sides • Sidewall height: 35 cm • Chassis: Flatbed, KNOTT parabolic spring axle • Tipping function: Three-way tipping • Hydraulics: Electric & emergency manual tipping • Tipping angle: approx. 45° / 47° • Hydraulic cylinder stages: 4 stages • Brake coupling & brake system: KNOTT • Frame/chassis: Welded, fully hot-dip galvanized steel frame • Extensions: At extra charge • Lashing eyes: 8 in the floor • Support legs: At extra charge • Ramps: At extra charge • Lighting connector: 13-pin • Approval: COC documents Standard equipment: • Double-walled anodized aluminum sidewalls • Side and rear sidewalls foldable • Detachable sidewalls • Rear panel also swing-mounted • Solid full steel floor – extremely robust • Very sturdy welded steel frame • Full immersion hot-dip galvanized frame • Multiple cross beams for high point load capacity • Additional longitudinal beams continuously welded in • Electric hydraulics for tipping, with battery and cover • Built-in battery • Integrated battery charger and charge indicator • Emergency hand pump installed • Reverse automatic system • Parabolic spring axles (leaf suspension) • KNOTT brake coupling and parking brake • Channel pre-installed for loading ramps • Sturdy over-center latches • Very robust bolted V-drawbar REINFORCED • 13-pin plug • Reverse lights • Large-format safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Automatic central jockey wheel • Vehicle registration documents: COC papers Optional accessories – Please inquire: • 100 km/h approval • Mesh sides 60 cm • Closed steel sides 60 cm • Spare wheel • Toolbox • Rear support legs • Loading ramps • Flat tarpaulin • Net hooks • Additional lashing eyes • Reverse lights • Lashing straps • and much more... Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance, or short-term plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been your authorized dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Including steel side walls / electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / battery charger Technical Data: • Type: New vehicle • MOT: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 3,500 kg • Empty weight: approx. 1,100 kg • Payload: approx. 2,400 kg • Internal dimensions: 361 x 185 x 35 cm (L x W x H) • Total external dimensions: 514 x 200 x 118 cm (L x W x H) • Loading edge height: approx. 73 cm • Tyres: 185/70R13C steel rims • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including registration documents Body Construction: • Floor: Full steel floor, heavily reinforced • Side panels: Full steel side walls, hot-dip galvanized, removable • Side wall height: 35 cm • Chassis: Platform trailer, KNOTT parabolic axle • Tipping function: Yes, 3-way tipper • Hydraulics: Electric and manual tipping • Tipping angle: approx. 45°/47° • Hydraulic cylinder stages: 4-stage • Overrun device & brake: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extensions: at extra cost • Lashing eyes: 8 in the floor • Supports: at extra cost • Ramps: at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Full steel side walls, hot-dip galvanized and reinforced • Side and rear panels foldable • Removable side walls • Rear flap also pendulum mounted • Full steel floor – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple sturdy cross beams for high point loads • Continuous welded longitudinal beams for additional reinforcement • Electric hydraulics for tipping, with built-in battery and cover • Integrated battery charger and charge indicator • Emergency hand pump mounted • Automatic reversing • Parabolic spring axles (leaf spring suspension) • KNOTT overrun device and parking brake • Ramp channel pre-fitted • Sturdy lever locks • Very strong, bolted V-drawbar, reinforced • 13-pin connector • Reversing lights • Large-dimension safety lighting • Integrated rear fog lamp • Tail lights recessed into rear frame • Central automatic jockey wheel • Registration papers: COC documents Optional Accessories – Enquire for details: • 100 km/h approval • Mesh side extension 60 cm • Closed sheet metal side extension 60 cm • Spare wheel • Toolbox Nledsyyw Npjpfx Acmec • Rear supports • Ramps • Flat cover • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and more New vehicle with warranty and MOT. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years, we have been an official dealer and repair workshop for industrial brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Subject to errors, omissions, and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Grab it now!! We are clearing out our inventory ahead of our move to a new location! There are unique pieces from our showroom at unbeatable low prices. incl. electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / battery charger Technical data: • Type: New vehicle • MOT (TÜV): New/2 years • Availability: IMMEDIATE • Permissible total weight: 3,500 kg • Unladen weight: approx. 900 kg • Payload: approx. 2,600 kg • Internal dimensions: 320 x 168 x 35 cm (L x W x H) • Overall dimensions: 475 x 186 x 120 cm (L x W x H) Nljdpfx Aceyyw I Esmec • Loading edge height: approx. 72 cm • Tyres: 195/50R13C steel rim • Brakes: yes • Jockey wheel: yes, automatic • 100km/h approval: optional! • incl. vehicle documentation Body structure: • Floor: solid full steel, heavily reinforced • Side panels: double-walled anodised aluminium, 4x foldable & removable • Side panel height: 35 cm • Chassis: flatbed, KNOTT parabolic suspension axle • Tipping function: Yes, three-way • Hydraulics: electric & emergency hand tipping • Tipping angle: approx. 45° / 47° • Hydraulic cylinder stages: 4-stage • Overrun device & brake: KNOTT • Frame/chassis: welded steel frame, hot-dip galvanised • Side extensions: available at extra cost • Lashing eyes: 6 on the floor • Supports: available at extra cost • Ramps: available at extra cost • Lighting plug: 13-pin • Approval: COC documents Standard equipment: • Double-walled anodised aluminium side panels • Side and rear panels foldable • Removable side panels • Rear flap can also swing • Full steel floor – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanised • Many stable cross-members for high point load capacity • Continuous additional longitudinal reinforcements welded in • Electric hydraulic tipping with battery and cover included • Built-in battery • Integrated charger + charge indicator • Emergency hand pump fitted • Automatic reversing system • Parabolic spring axles (leaf suspension) • KNOTT overrun device and handbrake • Ramp shaft pre-installed • Sturdy lever locks • Extra strong V-drawbar bolted and reinforced • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Integrated fog tail lamp • Rear lighting recessed in frame • Central, automatic jockey wheel • Documentation: ZBII & COC papers Options available – please enquire: • 100km/h approval • 60 cm mesh cage extension • 60 cm closed sheet extension • Spare wheel • Toolbox • Rear supports • Ramps • Flat tarpaulin • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and more Brand-new vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration papers can be sent in advance or red number transfer plates (Germany) can be provided - Export plates including customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been your specialist dealer and workshop for repairs for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions, and prior sale -

Condition: used, / / / / Heidenhain UV 101B Power Supply ID 317 559-13 Condition: used (functional) Nlodeypwf Uopfx Acmoc All technical specifications are subject to change without notice.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 198 kg, total length: 740 mm, total width: 554 mm, space requirement height: 1,014 mm, power: 7.5 kW (10.20 HP), volume flow: 1.09 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Stock machine, immediately available in 10 bar version incl. the options: - Direction of rotation control No.10867 (€230,-) - Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) No.20902 (€439,-) 7.5 - 10 - 13 - 15bar possible at very short notice 2-year full functional guarantee Easy to maintain thanks to easily removable doors Nodpfsvb Agwox Acmelc The right solution for every requirement: as a free-standing system, with attached refrigeration dryer and as a complete unit on pressure vessels in various sizes Intensive cooling in conjunction with an effective aftercooler guarantees operational safety and good air quality Developed for industrial use - even in continuous operation Standard components from German brand manufacturers offer a high quality standard and flexibility in the event of faults Powerful compact compressor stages with integrated oil control valve Effective sound insulation box and multiple bearings on vibration metals enable low-noise and low-vibration operation Controlled via the RENNERlogic Optionally available: RENNERtronic / RENNERtronic Plus control system Options: Direction of rotation monitoring via phase sequence relay RENNERtronic electronic control unit RENNERtronic Plus electronic control unit Sound insulation box (noise reduction by approx. 4 dB, +14 kg, length +200 mm) Super sound insulation box (sound reduction by approx. 6 dB, +23 kg, length +280 mm) Exhaust air box Filter grille for sound insulation box (2x required)

Condition: used, Year of construction: 2004, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped in container. Type: DF 1500 Nedpsyx U Igsfx Acmjlc Burner: Weißhaupt (oil or gas available, currently equipped with oil) New water treatment in 2024 Fully installed in container Net price Location: Poland Do not hesitate to contact us in case of questions.

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C Nlsdpfx Aohgiz Iscmjc ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,350 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, Njdot I Tp Sjpfx Acmelc automatic speed reduction system, electric refueling pump, Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Nsdpox U Tfpjfx Acmelc

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Isoflux, servo motor type 544,4,25,96/13 -Speed: max: 2500 rpm -Voltage: 96 V -Shaft: Ø 16 x 50 mm Nedpfswwqi Rjx Acmslc -Bolt circle: Ø 130 x 10 mm -Protection class: F -Dimensions: 500/128/H150 mm -Weight: 16 kg

Condition: excellent (used), mileage: 1,648,596 km, power: 294 kW (399.73 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, total length: 5,900 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2008, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, spoiler, = Additional options and equipment = - Aluminium fuel tank - Roof spoiler - High beam lights - Radio/CD player - Sleeper cab Nodpoyt I Alefx Acmjlc - Sun visor - Pre-heating automatic system = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Front axle: Tire size: 385/65 R22.5; Steered; Suspension: Parabolic suspension Rear axle: Tire size: 315/70 R22.5; Twin tires; Suspension: Air suspension Unladen weight: 7,825 kg Technical condition: very good Visual condition: very good Reference number: 75

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Nsdeihfiiepfx Acmelc Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Nlodpfoxabkhjx Acmoc - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 1998, Complete line Paneling press Oil heating Power 31kw 250/130cm Automation of press entry and exit Njdpfx Asw Tykzocmslc Ejector to molder for example ORMA SC2R-300 gluing machine at the press entrance 380V Available immediately

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø Nsdpevvx Hisfx Acmjlc 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Hydraulic scissor lift table WEIDMANN, type E5/13-1 Manufacturer's No. 30403339, Year of manufacture 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift height max. 1280 mm Overall height - table in lowered position 290 mm Nsdehlnznopfx Acmolc Overall height - table in raised position max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Rotary switch on the hydraulic unit for raising and lowering - Lowering speed can be adjusted continuously via a throttle valve - 1 lifting cylinder - Hydraulic unit, year of manufacture 2007, with tank positioned beside - Safety guard frame with limit switches Weight 660 kg Good condition

Condition: excellent (used), Year of construction: 2013, CFT S.p.A. sorting and crushing line consisting of: - CFT S.p.A. receiving hopper with drum screen type: VASCA di LAVAGGIO con ELEVATORE model: L945 1/13 serial number: 24621 year of manufacture: 2013 plastic mesh belt with partitions belt width: 540 mm partition height: 30 mm distance between partitions: 200 mm Nsdpjvq I Husfx Acmolc lifting height: 1950 mm sieve: 1 mm overall dimensions: 3400 mm x 2950 mm x 1950 mm. - Conveyor belt, loading/inspection belt CFT S.p.A. inspection belt with work platform type NASTRO di CERNITA model L945-313 serial number 24622 year of manufacture 2013 plastic belt belt width 600 mm overall dimensions 4200 mm x 2800 mm x 1680 mm. - S/s tank with volume sensor - Lifting/loading/feeding belt with partitions CFT S.p.A. plastic belt with partitions belt width: 600 mm partition height: 120 mm distance between partitions: 700 mm lifting height: 3100 mm overall dimensions: 5000 mm x 1900 mm x 3900 mm. - CFT S.p.A. crusher with progressive discharge pump Type: TRITAGHIACCIO Model: CR 2 Serial number: 24602 Year of construction: 2013 Internal dimensions of hopper: 950 mm x 1000 mm x 900 mm Overall dimensions: 5800 mm x 2100 mm x 3500 mm - Hopper/bunker/tank with volume sensor Dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm Nsdsx Slcbepfx Acmslc -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.

Condition: used, Flat Pulley, Timing Pulley, Multi-Belt Pulley, Timing Pulley -Toothed pulley: Ø 256 mm -Type: D TB 56-14M-85 -Intake: Taperbush Tecnamic 3525-48 / Ø 48 x 65 mm -56 teeth: belt width 85 mm -Dimensions: Ø 256 x 103 mm Nsdpfx Ajmxpuzocmelc -Weight: 25 kg

Condition: used, Drill chuck, collet chuck, keyless drill chuck -Manufacturer: Ewe, drill chuck keyless drill chuck SK40 -Type: 802 531 -Clamping range: 1-13 mm -Number; 2x drill chuck available Nledpfxot Had Hs Acmjc -Price per piece -Dimensions: Ø 63 x 180 mm -Weight: 1.2 kg/St.

Condition: good (used), Magnetic brake, spring-loaded brake, single-disc brake, spring-loaded single-disc brake, magnetic brake Nodpowzhxdefx Acmjlc -Manufacturer: Binder, spring-loaded brake -Type: 76-145 13 E 1 3 -Voltage: 24 V -Braking force: 32 Nm -Mounting: with shaft adapter Ø 20 mm -Number: 3x brake available -Price: per piece -Dimensions: 185/140/H85 mm -Weight: 4.5 kg/pcs

Condition: used, V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm Nljdpfxeu Sv Tco Acmoc -Weight: 14 kg