Used Swing Chisel for sale (2,784)

Condition: used,

Condition: good (used), Year of construction: 2001, Cutting length 3060 mm Maximum cutting capacity 6 mm Manual adjustment of cutting gap 750 mm backstop Fold-up finger guard Support arms with scale with sheet metal holding device Kdsdez Sx Exjpfx Akpju

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Kedozii A Dopfx Akpedu Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1994, For sale is a robust oscillating circular saw from the German manufacturer Bäuerle, model PKS, manufactured in 1994. The saw comes from a public institution and has always been maintained and serviced. Kodpjzz Nqlofx Akpedu Thanks to its mobile base, the machine can be used flexibly within the workshop. Ideal for the precise cutting to length of solid wood, timbers, planks, and sheet materials. Technical data and features: +Manufacturer: Bäuerle +Model: PKS +Year of manufacture: 1994 +Motor power: 3 kW +Connection: 400 V +Mobile base +Saw blade diameter: max. 450 mm +Saw blade bore: 30 mm +Speed: approx. 2,800 rpm +Cutting height: approx. 125 mm +Cutting width: approx. 600 mm +Mitre range: 0–45° +Dust extraction connection: Ø 100 mm Solid and durable design for professional use in carpentry shops, joineries, and wood processing companies. If you are interested or have any questions, please do not hesitate to contact us! Price: Negotiable €3900 net.

Condition: excellent (used), Year of construction: 2008, very well-maintained bending machine max. bending length 4.1 m max. sheet thickness 1.25 mm Kodpfx Ajzzrikekpjdu with shear, electrically driven with feed mechanism

Condition: good (used), functionality: fully functional, Year of construction: 2009, Still in good condition, well-maintained press brake from the renowned manufacturer Biegemaster. Maximum processing length: 6.2 m. Ksdpfez Dnqgjx Akpjdu Suitable for material thicknesses up to 1.25 mm. Equipped with a Knauf profile upper tool.

Condition: ready for operation (used), functionality: fully functional, The THIMON SWING PRO 5-sided strapping machine is a state-of-the-art industrial solution designed to provide complete pallet strapping using a single consumable. Thanks to its patented triangular arm technology combined with a motorized rotary table, it performs the packaging of all five sides of the pallet in a single cycle, while guaranteeing excellent load stability. This technology improves the protection of goods against dust, moisture, and stresses related to transport. Kdedpfx Akozhwfkjpou Designed for the food processing, logistics, pharmaceutical, paper, or manufacturing industries, the WRA-PAL SWING PRO combines a high throughput with reduced stretch film consumption. Its motorized pre-stretch module and 1,000 mm film width allow for a reduction in consumable usage of 20 to 40% while improving load retention. Furthermore, its capacity to accommodate reels up to 100 kg offers significantly greater autonomy than conventional systems and limits production downtime. The machine easily adapts to different pallet sizes thanks to its numerous adjustments. Its cutting and heat-sealing device eliminates film tails at the end of the cycle, while its patented pleated film system reinforces the cohesion between the pallet and the load. In addition, the use of a single film for all five sides guarantees inviolable product protection and improves their preservation during storage and transport. At Europ'Équipement, this strapping machine undergoes a complete overhaul before being sold. Each component is inspected, serviced, and tested to offer manufacturers a reliable, high-performance, and immediately operational solution, while significantly reducing the investment compared to new equipment. Technical specifications: Packaging of all 5 sides with a single film reel Motorized rotary table Patented triangular arm with mobile linkage Motorized pre-stretch module Film width: 1,000 mm Adjustable pre-stretch: 0 to 350% Reel capacity up to 100 kg Automatic cutting and heat-sealing device Pleated film reinforcing load cohesion Anti-fall system for the stretching carriage Touchscreen operator interface Frequency inverters Programmable industrial controller Adaptation to different pallet sizes Simplified maintenance thanks to optimized kinematics

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt Kdedpfxozd H U He Akpsu - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Kodpfxjz S Nc Uo Akpodu Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 Kdodpfxodr R Tco Akpsu - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DN2383 / 2368, 1 Schmalz Column Swivel Crane 2 cranes available! Height 4.8m, length 3m, upper carriage boom 4m, hook height 3.6m Load capacity at full extension 350 kg Total weight approx. 500 kg including anchor plate 75x75 cm with 500 kg Schmalz chain hoist with floor control (with 2 lifting speeds) Connection to 400V 16A, swivel range approx. 270° Crane is disassembled and packed on a pallet Very good condition, almost new. See pictures Kdedpfx Akezvuldspsu Item location is 75053 Gondelsheim Shipping by freight forwarder or collection by appointment

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN Ksdpfezii Awex Akpodu The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for Eppendorf® Swing bucket rotor A-4-44 The unit is in full working condition and ready for immediate use Kdedpfx Aksyyalgepju Swing bucket rotor designed for Eppendorf centrifuges, supporting efficient and balanced sample separation. Ideal for laboratory centrifugation applications with reliable performance and durable construction.

Condition: excellent (used), empty load weight: 5,260 kg, maximum load weight: 12,740 kg, overall weight: 18,000 kg, first registration: 04/2014, loading space length: 6,950 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 44.81 m³, total length: 7,280 mm, total width: 2,600 mm, total height: 3,900 mm, fuel type: diesel, fuel: diesel, Equipment: ABS, EBS, Key Features Internal Reference: 26389M Chassis Number: AH1814870814367 Vehicle Model: AH18 Vehicle Make: FABAG Product Category: Box Van Condition: Used Date of First Registration: 04/30/2014 Last Inspection Date: 04/10/2025 Fuel Type: Diesel Overall Vehicle Condition: Very good Suspension: Air-Air Hydraulic System: None Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle 1: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Axle 2: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 18000 Payload: 12740 Unladen Weight: 5260 Vehicle Height: 3900 Vehicle Length: 7280 Vehicle Width: 2600 Kdodoz Hn E Aopfx Akpsu Body Body Manufacturer: FABAG Body Model: Climate-controlled Box Van Body Internal Dimensions (L x W x H): 6950x2480x2600 Body Manufacturing Year: 2014 Body Note: Manufacturer: FABAG, Model: Climate-controlled Box Van, Year: 2014

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Ksdsy D U Dfspfx Akpjdu Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: refurbished (used), Refurbished Multigraf Touchline CF375 Creaser Folder Availability: In Stock Condition: Fully refurbished - including a new Care Kit B, full new rollers, fold bar, feed belts, and various smaller internal components. Exceptionally low usage, with a lifetime sheet count of just 86,000. Overview The Multigraf Touchline CF375 is a premium creasing and folding system designed to produce professionally finished documents with exceptional accuracy, reliability and ease of operation. Manufactured in Switzerland, the CF375 combines precision engineering with fully automatic setup, making it one of the most highly regarded creaser folders available for commercial print finishing. Designed for commercial printers, digital print providers, universities and corporate print rooms, the Touchline CF375 creases and folds in a single pass while handling a wide variety of coated and uncoated media from 80 to 400gsm. Its patented Swing-Bar creasing system virtually eliminates fibre cracking, while the Pro-Knife folding technology delivers precise, repeatable folds across a broad range of applications. Every refurbished Multigraf Touchline CF375 supplied by Glendale Presentation Solutions is professionally refurbished by our experienced engineers, fully tested and supplied ready for immediate production. Whether you're producing folded brochures, greetings cards, menus or premium marketing literature, the Multigraf Touchline CF375 delivers exceptional finishing quality with minimal operator intervention. Key Features Fully automatic creasing and folding system Top-fed vacuum suction feeder Multigraf Swing-Bar creasing technology Multigraf Pro-Knife folding system Automatic setup via colour touchscreen Crease and fold in a single pass Crease only or fold only operation Up to 20 creases and 2 folds per sheet Processes media from 80–400gsm Sheet sizes from 105 × 148mm up to 375 × 660mm (up to 1,050mm with extension) Production speeds of up to 6,000 sheets per hour High-capacity shingle delivery Job memory for repeat work Choice of standard and narrow crease tools Swiss manufactured Why Choose the Multigraf Touchline CF375? The Multigraf Touchline CF375 has earned an outstanding reputation throughout the print industry for its exceptional build quality, reliability and finishing quality. Manufactured in Switzerland, it combines precision engineering with innovative creasing and folding technology to deliver professional results day after day. Its patented Swing-Bar creasing system produces crisp, professional creases without stopping the sheet, significantly reducing the risk of fibre cracking on digitally printed and coated stocks. Combined with Multigraf's Pro-Knife folding technology, the CF375 delivers accurate folds and excellent registration while maintaining high production speeds. Automatic setup via the touchscreen control panel dramatically reduces make ready times, allowing operators to switch quickly between jobs with minimal manual adjustment. Whether you're producing folded brochures, greetings cards, menus, direct mail or premium marketing literature, the Touchline CF375 delivers the productivity, flexibility and finishing quality demanded by busy print environments. Kdsdpfx Aks Abaq Tjpsu

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment. Kedpjzv Hytefx Akpodu

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, Kdodpfx Aez Srv Djkpou 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Kdodpfxoz Rqmrs Akpeu Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg.

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Ksdex Ectuepfx Akpodu

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Colour: Green Empty weight: 10.000 kg - Documentation available: Yes - Drive system: Conventional - Power [kW]: 11.5 - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Facing lathe, Quick-change tool post, Digital readout - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdodpfx Aj Aattfokpsu Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Kdjdpfowiatvex Akpsu Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Kjdpfeyzblwox Akpjdu Shipping by freight forwarding or pickup by appointment only

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Kedexwpitopfx Akpsdu Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: good (used), TOS SUI 50/2000 lathe Kodpfxjy D Eclo Akpsdu - Max. turning diameter: 560 mm - Distance between centers: 2000 mm - Spindle bore: 58 mm - Year of manufacture: 1990 Rapid traverse on longitudinal and cross slide