Used Surface Technology for sale (29,062)

Year of construction: 2023, condition: new, machine/vehicle number: 001, The Stainless Steel Molasses Mixer is an advanced machine designed for homogeneous mixing of raw materials with liquids such as molasses and steam. With its two shafts and high-quality stainless steel construction, this machine offers durability and efficiency in one. The strength of this molasses mixer lies in its ability to deliver a continuous mixing process with an impressive capacity of 60 tons per hour. This makes it ideal for industrial applications where consistent and even mixing of materials is crucial to the production process. Rcodpjrk Ipnofx Aa Eek The machine's stainless steel construction ensures not only durability but also hygiene, making it suitable for applications in the food industry and other sectors where strict standards apply to materials in contact with products. Whether in the production of animal feed, chemical mixtures or other industrial processes, the stainless steel molasses mixer guarantees reliability and consistency in the mixing process, making it a valuable asset for modern production environments. Power:2 x 22 kW Speed:1500 rpm 2. volume: 600 liters 3. capacity:60 Tons/Hour 4. weight: 2500 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Redpfxjww Id Ee Aa Eeck Width 40 cm Conveyor belt with metal detector, also for non-ferrous metals and aluminum Sensitivity adjustment of metal detection

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Voltage: 3-phase four-wire, AC400V, 50/60Hz Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Rcsdpfxjxvmxps Aa Ejk Installed outdoors, total operating hours approx. 15,815 kWh Available for pickup/shipping from December 2025 Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain Rcjdpfx Aexn Rt Uja Eek • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, temperature: 1,800 °C, control voltage: 380 V, input frequency: 5,060 Hz, For Sale: Metal Melting and Heating Furnace system (copper, steel, etc.) A brand new, unopened induction furnace is available for sale, designed to heat and melt 100 kg of copper or 30 kilograms of steel per batch. The maximum temperature the furnace can reach is 1800 °C. The manufacturer’s warranty is valid for one year from the date the package is opened - warranty seals are placed on the packaging. The equipment is new and unpacked, located in Nova Gajdobra, Serbia and available for immediate pickup. It comes with a 34-page user manual in English. The system is capable of continuous 24-hour operation. All components are packed in three wooden crates (see attached photos) with the following dimensions: * Furnace: 1350 × 930 × 1150 mm * Host: 640 × 350 × 600 mm * Extension: 540 × 390 × 480 mm The system consists of: 1) Two melting furnace pots, 70 kW 2) Two medium-frequency power supplies 3) Two cooling systems (tower + water pump) 4) One control center 5) Twelve SiC melting pot inserts Detailed technical specifications are available upon request for potential buyers. Technical Characteristics: * Input voltage: 380 V * Frequency: 50 Hz to 60 Hz * Maximum furnace temperature: 1800 °C Redpsx Al Rwjfx Aa Eeck * Metal melting capacity per hour: 100 kg of copper or 30 kg of steel * Designed for continuous 24-hour operation Model name: Induction Medium-Frequency Metal Melting Furnace 70 kW Price: € 21000, sold only as a complete set.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min New pump, working hours 0 . Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system. Rcodpfxevdnpis Aa Ejk

Year of construction: 2024, condition: new, - New machine made entirely of stainless steel including washing pump - Automatic basket drive - Touch button to turn the basket outside of the cleaning procedure - Tank cover and mesh filter under the stainless steel basket - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 790 mm - Usable height of the basket to the lower edge of the nozzle holder 430 mm - Flat jet nozzles - washing pressure 3 bar - including 30 KG LCT Power Star 50-730 - Stock items, available immediately Rcsdpfx Aasffqi Uj Esk

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. Rsdpfsxcnkaox Aa Esck An inspection of the machine is possible upon request and by appointment. We are available for any further questions you may have.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, A conveyor belt from MK is for sale, with frequency converter. If you're interested, I'd be happy to send you a video of the conveyor. L: 3000 mm Width: 500 mm Rjdpfxjv Tnxps Aa Esck Height: 580 mm Height: 300 mm - 900 mm Mobile, 4 brake rollers Adjustable conveyor speed, 1-11 m/min

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes Rsdou Dg Uhspfx Aa Eeck non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Rjdpfxjwb E Sbo Aa Eock

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. Rcedpfxowqg Iio Aa Eek --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Year of construction: 2024, condition: new, New machine made entirely of stainless steel included washing pump - Automatic basket drive - Touch button to turn the basket outside of the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 975 mm - Usable height of the basket to the lower edge of the nozzle holder 450 mm - Flat jet nozzles Rcsdpfx Aaehcpbbe Eek - washing pressure 3 bar - including 20 KG LCT Power Star 50-730 - delivery, after receipt of payment within 5 - 6 weeks - 24 months guarantee - Shipping is possible

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 3,500 kg, pipe diameter (max.): 220 mm, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm Rsdsrh Iw Tjpfx Aa Eeck · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: new, functionality: unexamined, machine/vehicle number: PST400, Complete multi-stage industrial washing system with stainless steel tank structure, ultrasonic cleaning, oil separation, demineralized and ultrademi water washing, hot air drying, and integrated filtration. Equipped with digital temperature control, automated regeneration system, and safety containment basin. Ideal for precision cleaning applications in surface treatment. Rcedpfxjxfrg Rs Aa Esk

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. Rcjdoua D Alopfx Aa Ejk ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical Data Summary (No Marketing Spiel): This is a used automatic in-line Solder Paste Printer, Model P4034 from Shenzhen ETA Technology Co., Ltd, manufactured in 2018. The machine is in excellent functional condition. Key Performance Parameters: ● Repeat positioning accuracy: ±0.01mm. ● Printing accuracy: ±0.025mm. ● Max PCB size: 400×340mm. Rjdpfsxm S N Ujx Aa Eeck ● Min PCB size: 50×50mm. ● Max Stencil Frame size: 737×737mm. ● Cycle time (excluding print/clean):

Year of construction: 2024, condition: new, - Demonstration machine from 01/2021 completely made of stainless steel including Washing pump Rcodpfx Aajg Hgcwj Eok - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Rcsdpfxjw Ebzme Aa Ejk Process gas control for: oxygen / nitrogen / compressed air according to material and process

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste Rjdpfx Aoiqxtbsa Eock To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: cooling unit, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting Rcodpfxot A N A Ro Aa Esk

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Rjdpfxjk Ran Ee Aa Ejck Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz Rcjdpfoi Hb I Tsx Aa Eok · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Rcodpfjr D Nfksx Aa Eek Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. Rodpscuiz Tefx Aa Ejck The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control Optional: positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm working area with protective glass! (Extension of the work area optionally to (180, 350 mm) almost maintenance-free