Used Stromab Tr 450 for sale (62)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 600 mm, overall weight: 550 kg, type of input current: three-phase, input voltage: 380 V, saw blade diameter: 600 mm, hole diameter of the disc: 30 mm, disc diameter: 600 mm, Crosscut saw - HYDRAULIC STROMAB TR 600 Engine 7.5 kW, 380 v, 16,5 A Ksdpfoxz S Dnjx Adtswt Weight: 550 kg In good working condition, ready for production

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor Kwodpfx Aet U Izpjdtet - 415 volts - serial number: 1377 - year 2007

Condition: good (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 500 mm, The saw is still in operation and can be tested at any time by arrangement. Data available on the nameplate. Ksdpfxjyaangs Adtjwt

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, Kwjdpfx Aen Nv Ugodtet USB port for importing cutting lists

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Kodpfedy Hrdjx Adtswt Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Kwsdpfxjriuute Adtjt Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter Kwodjb Tmwaspfx Adtot

Condition: used, Year of construction: 2004, functionality: fully functional, AUTOMATIC CROSS CUTTING MACHINE STROMAB MOD. TR 600 - 2 meters infeed rollers - 2 meters outfeed rollers Ksdpfex Rrp Sox Adtjwt - N. 3 stops - CE rules - Year 2004

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Kodpjr A Ulkofx Adtjwt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 600 mm, STROMAB TR600 Crosscut Saw Specification: • Condition – used, after inspection • Manufacturer – STROMAB • Model – TR600 • Total power – 9.2 kW • Blade diameter – 600 mm • Motor spindle diameter – 30 mm • Motor speed – 3,000 rpm • Hydraulic clamping and blade movement • Adjustable cutting speed • Max. cutting width – 610 mm (at 30 mm height) • Max. cutting height – 160 mm (up to 380 mm width) • Additional table – 1 x 2.0 m • Base weight 570 kg • Year of manufacture: 2001 • Extraction port – 3 x 100 mm • Machine complies with CE standards, equipped with guards, E-stop buttons, and Italian documentation • Overall dimensions (base) – 130 x 145 x 135 cm (L x W x H) Additional information: • Very good original technical and visual condition • The photos shown reflect the actual condition of the item for sale • Possibility to run and test the machine on site Kjdpfx Adox Ezmcjtewt

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Minimum working area 390 x 420mm Kwodpfx Aeg Np Raedtst 2.2kW engine Weight 1500 kg

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Kjdpfohw Ng Iex Adtswt Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, Year of construction: 2023, cutting height (max.): 200 mm, overall weight: 700 kg, cutting width (max.): 660 mm, disc diameter: 600 mm, Good morning, We offer for sale a brand new crosscut saw manufactured by the Italian company STROMAB model TR601 Kwjdpfjqu Uz Tox Adtst To begin with, some useful information about the machine: * three-phase motor of 9,2 kW ( 12 HP ). * motor speed - 2636 rpm. * disc diameter - 600 mm * blade opening - 30 mm * max cutting width - 660 mm ( at element height - 30 mm ). * max cutting height 200 mm ( at element width 300 mm ). * outlet for sawdust extraction fi 100 mm * ratchets for cutting to the specified length. * hydraulic element pressure and disc movement. * regulation of cutting speed * maximum operating pressure - 70 bar * weight 700 kg * left long table and right shorter table included Machine brand new, available from stock.

Condition: like new (used), Year of construction: 2016, I sell the pneumatic end cutting saw Stromab TR350, year 2016. Motor power 4,0kW Saw blade diameter fi.350x30mm Cutting schema ver.1 max. 210x30mm Cutting schema ver.2 max. 150x80mm Input table 1,00m (possible to enlarge) Outut table 1,00m (possible to enlarge) Kwedporzu Ugefx Adtst Fence for stoppers 2,00m total length Available immediately. Condition like new. Weight 150kg.

Condition: used, Stromab TR350 chop saw IDC000098 - complete with filter Kwsdeu Dhziepfx Adtjt - with roller conveyors

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 Kwjdsrx Tatopfx Adtot MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice Ksdpfxjkwhb Hs Adtowt

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Kwsdpoyb Sclofx Adtjt

Condition: used, Year of construction: 1990, total width: 1,100 mm, total length: 3,400 mm, total height: 2,450 mm, - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 90002 - Main motor power [kW]: 0.7 - Press drive: Hydraulic Kodpfowxr Nuox Adtswt - Max. clamping width [mm]: 2900 - Max. clamping height [mm]: 2000 - Number of cylinders [pcs]: 5 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 3400mm x 1100mm x 2450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, functionality: fully functional, Data on the nameplate Kwedpfxoyahlgo Adtst

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension Kwedpfx Aex Da Tvodtot 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: good (used), Code: 0215 Brand: STROMAB Model: PS 45/F - CE Standard Manual pendulum saw for cutting wooden boards, packaging, wooden fixtures, carpentry, sawmills, and various - CE Standard Kwjdpfsxivzajx Adtjt Technical data: Blade diameter mm 450 F30 Motor Hp 5,5 Motor speed rpm 2800 Cross-cut capacity mm 510 Depth of cut mm 130 Manual feed Inlet roller table Outlet roller table Extractor hood diameter mm 150 Overall dimensions mm 3800 x 1500 x 1850 h Weight kg 290

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Total power requirement 8 kw Ksdpfx Asvz Hz Eodtjwt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kw Kwsdpfsvz Eq Sjx Adtet

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Kwjdpfx Adexg I Sljtet Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase