Used Stromab Tr 450 for sale (61)

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Bledpfx Abswx R Ivjber

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 900 kg Bsdpfov A Hr Tox Abbjlr Total power requirement 5 kw

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. Bodpoxraucefx Abbelr ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: ready for operation (used), Technical characteristics blade Ø 450 mm, 4 kW Blodporaduajfx Abbor Capacity 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Useful cutting length 6000 mm, 90 m/min Lifting fence with detection part MATRIX 3 PLUS POWER 1000 control Data management and USB port for cutting list import Outfeed table 3 m Cutting of wooden tiles, packaging, pallets, rafters, lumber Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Max. blade Ø 450 mm, bore 30 mm Motor power : 4 kW Rotation speed : 2800 RPM Cutting capacity (height x width of wood) : 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Infeed table : Outfeed table : Tigerstop stop supplied 2 suction nozzles Ø 100 mm Ideal for : cutting wood tiles, packaging, pallets, rafters, lumber Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Bljdpfxsradt Dj Abber Overall dimensions Lenght: 2100 mm Width: 1010 mm Height: 1210 mm Weight: 310 Kg

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodewnh N Nopfx Abbelr Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Bledpfx Abexiza Uebsr

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 220992, SECOND HAND END CUTTING SAW WITH ELECTRONIC PUSH FEED STROMAB MOD. TR500 MATRIX - CE RULES - infeed with roller table and electronic push feed MATRIX of 6000mm - Outfeed roller table1500mm - 10 hp motor - Blade diameter: 500mm - Blade rotation speed: 3500 rpm - Maximum cutting capacity: 360mm (L) at 55mm (H), 200mm (L) at 135mm (H) - Minimum cutting section: 20mm (L) x 10mm (H) - ELCO numerical control Bledpfxst U I A Hs Abbor - 415 volts - Serial number: 220992 - Year 2002

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 600 mm, overall weight: 550 kg, type of input current: three-phase, input voltage: 380 V, saw blade diameter: 600 mm, hole diameter of the disc: 30 mm, disc diameter: 600 mm, Crosscut saw - HYDRAULIC STROMAB TR 600 Engine 7.5 kW, 380 v, 16,5 A Weight: 550 kg Bodpsxz S Dnefx Abbslr In good working condition, ready for production

Condition: ready for operation (used), Technical characteristics Hydraulic blade feed Blade Ø 600 mm 12 kW motor, 3000 RPM Two-hand control Usable capacities : Width 610 x Height 30 mm à Width 420 x Height 160 mm Presser protection grid MATRIX 2 Usable length 6000 mm Length optimization, automatic cycles 99 programmable cutting cycles 15 programmable measurements/cycle 3 suction nozzles Ø 100 mm Power and Motors Bedjt E Efgepfx Abbelr Voltage: 400 V Pluging: Three-phased Motor: 16 CV Overall dimensions

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Bsdpov A Htkofx Abbelr Total power requirement 10,2 kw

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Price: On request Optimization cross-cut saw Bodpfx Ajwq U Dxebbolr Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm Bsdpfx Aot U Izpjbbolr - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts - serial number: 1377 - year 2007

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 8,5 kw Bodpfx Aev A Htdobbolr

Condition: used, Year of construction: 1990, total width: 1,100 mm, total length: 3,400 mm, total height: 2,450 mm, - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 90002 - Main motor power [kW]: 0.7 - Press drive: Hydraulic - Max. clamping width [mm]: 2900 - Max. clamping height [mm]: 2000 - Number of cylinders [pcs]: 5 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 3400mm x 1100mm x 2450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpfxewxr Nus Abbslr Yorick Diebels

Condition: new, Year of construction: 2021, machine/vehicle number: MR004301, Manually operated glue presses with a maximum height of 1800 mm. The price is for a ready-to-use unit, ex Staphorst. On-site delivery is available at an additional cost. The press is equipped with the following options: - Manual pressure unit at the front Technical specifications: - Clamp cylinder stroke: 60 mm Bodpfevcy Emjx Abbelr - Wheel set: Yes - Maximum length: 2500 mm - Maximum height: 1800 mm - Number of vertical pressure bars: 4 - Maximum cylinder pressure weight: 450 kg - Serial number: 8877

Condition: good (used), Code: 0239 Brand: STROMAB Bjdpfjxv Su Ajx Abbelr Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Pair of vertical cylinders for cutting optimisation management Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 3 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Machine weight kg 2900 Total weight kg 3250 (Machine + roller benches)

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 1200 mm Dimensions Machine Length 20000 mm Bsdpfjxzlrfox Abbolr This STROMAB SL3 laminating press was manufactured in 2019. It features a working area with lengths from 3,000 mm to 20,000 mm, a height of 1,200 mm, and a maximum beam width of 200 mm. Equipped with three vertical cylinders per meter, each cylinder exerts a force of 7,200 kg at 200 bar. It includes an integrated hydraulic power unit with independent pressure adjustments. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Bljdpfx Abow Tar Esber Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation 1000 mm out feed table

Condition: excellent (used), Year of construction: 2018, Stromab CT600 circular saw with 6 m infeed table. Bsdjxzu U Aepfx Abbjlr

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Blodpfx Abexq Au Ajbjr Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Bedpfx Abedy Hrdjbslr Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Bljdpfxob Tmwaj Abbsr Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Bjdpfxoriuuts Abbslr Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Blodpfx Abjn Nv Ugjbsr Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists