Used Straightening Plates for sale (12,449)

Condition: good (used), total length: 5,100 mm, total width: 2,250 mm, plate height: 350 mm, Manufacturer: BERTHIEZ Type: Cast iron Year of manufacture: 2000 Specifications Metric US Standard Length 5100 mm Width 2250 mm Height 350 mm Number of T-slots Cedpfewp Hiwox Abbsaa 6 T-slot spacing / step 300 mm T-slot size 36 mm Weight per plate approx. 9800 kg Number of matching pieces 2 Dimensions (estimates) Length 5100 mm Width 2250 mm Height 350 mm Weight 0 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and as far as possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual conditions. We recommend you check all important details.

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack Cjdpfjkahkgex Abbjaa -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

Condition: used, Straightening and welding plate, steel cast iron / grey cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate length 1000 mm width 800 mm thickness 250 mm Csdodzqrpopfx Abboaa working height 820 mm plate thickness 30 mm throughout – height-adjustable metal base weight approx. 400 kg surface slightly rusted

Condition: ready for operation (used), Year of construction: 1950, Sale only within the EU member states! No private sale MAE can be viewed with pleasure. Any warranty right is excluded. For the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the observance of all safety and environmental protection requirements mentioned in the and environmental protection requirements mentioned in the accident prevention regulations. Any warranty is excluded. Caodpfx Aspz Ht Nsbbsa For the correctness of the technical data and year of construction, for the completeness of accessories and tools Cyn79beasd as well as for compliance with all safety and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: used, pressure / t distance between columns / mm stroke / mm This ram was dismantled from the MAE HY S 315s press Data from the machine to which Ram belonged: Press pressure devi. 315,000kg pressure up Caodpfx Asn Uzbrjbbsa Ram stroke 800 mm Projection / table depth 720 mm Installation height 800 mm Table width 1200 mm Table height 1200 mm Total height / width / depth 4200 mm / 2200 mm / 4350 mm Weight 30 tons Machine body as seen on the low loader is 4 tons It's just the pestle!!!

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length Casdpfswp E Ncex Abbja 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Fixators: for clamping plates / straightening plates, 6 pieces -Height: adjustable -Hole: Ø 40 mm -Price/Delivery: complete -Dimensions: Ø 340/H550 mm -Weight: 45 kg/piece Caodpfx Ajvz Smyebbja

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Cedpfxjhwn Tuo Abbsaa Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate with several symmetrical holes Net weight 3400 kg

Condition: good (used), number of straightening rollers: 23, product height (max.): 15 mm, Manufacturer: SCHUBERT Type: WMP 63/600 Year of manufacture: 1974 Total 23 rolls Upper rolls 11 units Codpfxswpkxco Abboaa Lower rolls 12 units Vario speeds 5 - 15 m/min Max. surface torque at 40 kg/mm2 3500/1800 Minimum workpiece length 130 mm Max. roll spacing vertical 16 mm Central lubrication Length infeed table 400 mm Specifications Metric US Standard Roll width 650 mm Sheet thickness at 5 x upper roll Ø 15 mm Upper roll Ø 63 mm Lower roll Ø 63 mm Number of rolls 23 Bending speed 3 - 15 Number of driven rolls 23 Dimensions (estimated) Length 2400 mm Width 2300 mm Height 1900 mm Weight 6000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend you verify all important details.

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces Cajdpfx Aoq Nqxwjbboa -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Caodpedz Sq Eefx Abboa Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 590 - 645 mm -Number: 3x feet available -Price: complete -Dimensions: Ø 410/H600 mm Cjdpod Tm Hljfx Abboaa -Weight: 93 kg/piece

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate heavy straightening plate length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout Caodpfxsu Inwfj Abbea - 3 height-adjustable feet weight with feet 680 kg good condition

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Casdpfxjif Sg Sj Abbja Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Straightening and welding plate made of steel casting / gray cast iron, heavily ribbed Cjdpfx Asdzqr Asbbeaa former marking and measuring plate heavy-duty straightening plate length 1000 mm width 1000 mm thickness 230 mm working height 970 mm plate thickness 38 mm throughout - metal base frame weight 450 kg

Condition: used, Steel-cast iron straightening and welding plate, heavily ribbed former marking and measuring plate Caedpefxwkkofx Abbsa heavy straightening plate length 2000 mm width 1000 mm thickness 240 mm working height 850 mm plate thickness approx. 30 mm throughout - 5 height-adjustable feet weight approx. 1000 kg good surface

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg Codpfshwn Tisx Abbjaa

Condition: used, Straightening and welding plate, cast steel/grey cast iron, heavily ribbed former scribing and measuring plate Codsdzqa Eopfx Abbsaa heavy-duty straightening plate length 2000 mm width 1000 mm thickness 100 mm working height 745 mm plate thickness 40 mm throughout - sturdy metal base weight approx. 800 kg good condition

Condition: used, Alignment and welding plate, cast steel - grey cast iron, heavily ribbed Heavy-duty alignment plate Length: 3050 mm Caedpoflt Ecjfx Abbja Width: 2000 mm Thickness: 300 mm Plate thickness: approx. 55 mm throughout Weight: approx. 4.5 tons Good condition

Condition: used, Measuring and scribing plate made of steel/cast iron, heavily ribbed, STIEFELMAYER originating from a measuring machine with manually guided measuring arm high-precision measuring plate with good surface Csdoftpl Djpfx Abboaa Machine No.: 8530979 Year of manufacture: approx. 1989 Length: 5000 mm Width: 2000 mm Thickness: 350 mm Working height: 690 mm Plate thickness: 50 mm throughout - 15 height-adjustable feet - very precise and stable longitudinal guides, bolted to the side of the plate Space required (L x W x H): 5000 x 2120 x 400 mm Weight: approx. 7500 kg good surface

Condition: used, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a classical straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, stepless Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pull roller pair, drive of the lower rubber-coated roller via open gear drive Caedpodzp U Aofx Abbja - Speed infinitely adjustable via handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit not driven) - On a sturdy metal base - Straightening machine was used for cardboard approx. 350 x 1.5 mm Space requirement (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram Caodpjdzqptjfx Abbsa - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very stable steel table base (custom-made) Casdpfjqvq Ucox Abbea - Plate with base movable by pallet truck Weight: 740 kg Good condition

Condition: used, SIEGFRIED WEYRAUCH Gemmingen straightening and welding plate Heavy ribbed cast steel/grey cast iron Former marking and measuring plate Heavy-duty straightening plate Codpfx Absd N H Dbobjaa Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with leveling screws for plate alignment Weight: 370 kg Good surface condition

Condition: used, Straightening and welding plate made of cast steel and grey cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate Length 2000 mm Width 1000 mm Thickness 260 mm Working height approx. 850 mm Plate thickness approx. 40 mm throughout - 5 pieces height-adjustable feet Cajdeu Swb Ispfx Abbja Weight with feet 1250 kg good condition