Used Straight Line Edging Machine for sale (69,442)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function Hedpsy H Hzbsfx Aagofg motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: refurbished (used), Tromp 3-roll Extruder stand alone unit working width 600mm extruding thickness from 1-10mm year of build 1996 electrical roller adjustment Siemens logo control with logo panel roller gap adjustable in panel speed rollers adjustable in panel Hfjdsy At Ugspfx Aagog connector for external control start, stop, emergency, reset two emergency switches with safety relais

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Hjdpfor A Eq Rjx Aagefg Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Hfodpjhy Tlrsfx Aagog • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit Hfjdpfxoc S Di Ro Aagog flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Hfjdsl D Rp Ejpfx Aagog Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine Hedpfx Aaelc Ewiogsfg milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Hodpjwiwnqjfx Aagefg Including cutter

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Hodpouxqzusfx Aagefg (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Hfedpfjtt Da Djx Aagog Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # Hodod Supgopfx Aagjfg distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Hfedpfsfbr S Rox Aagjg

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Hfsdpjbahd Esfx Aagog Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: used, Year of construction: 1997, incl. 3-roller feed, motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/sec, height-adjustable sanding table, table size: 1000 x 350 mm, infinitely tiltable sanding unit from 0 - 45°, angle scale and mechanical lock, foldable veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central extraction port: Ø 140 mm, sanding belt: 3000 x 150 mm. Storage location: Supplier. Hjdjy Dd Igspfx Aagofg

Condition: good (used), Year of construction: 2006, System with pump and water basin, Two spindles need repair. Swivels up to 60°, Working direction: from right to left, max. height: approx. 2500 mm, Depth: approx. 1000mm, Hfjdpforz Rgzjx Aagjg Length: approx. 6200mm, Available at the beginning of October.

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700 Hfodpjgipk Aefx Aagog

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Hfjdpfxoy Ay Aks Aagjg Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Hfjdpfsy H N Tmex Aagjg Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 Hfedpfxew I Unwj Aagsg serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm Hsdpfxey Id Nlo Aagofg - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. Hjdov T Ttfopfx Aagsfg - We will help you organize a profitable shipping company or courier.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Hfedsyga T Nepfx Aagjg Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 Hjdpfx Aeyn Ilpoagofg -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Hodpsu Racxsfx Aagsfg Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 Hodpfjvwgizsx Aagjfg CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.