Used Start Hole for sale (9,800)

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Rcjdpfxjzlbqfe Ac Tef Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. Rodpfxowqr R As Ac Tscf The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Rcedpfx Aozlbrvsc Tef Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier Rjdpjwh Rp Ejfx Ac Tecf - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 1996, general overhaul in 2005 Number of spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Z-axis travel: 350 mm Rodpfjy Eykgox Ac Tecf X-axis travel: 350 mm Drive power/spindle: - 100% duty cycle 3.7 kW - 50% duty cycle 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant volume: 1,000 l Compact band filter High-pressure pump Accessories included: - 29 drilling sleeves - Drilling sleeve holder - Taper chucks - Tapers - Drill chucks Optional accessories - € 5,500 - 137 drills - List available in PDF

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit Rcodezk N A Tepfx Ac Tjf with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Weight: 420 kg Availability: at short notice Location: Röllbach

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, 1. Cab & Interior * StreamSpace cab, 2.50 m, flat floor * Air-sprung cab suspension * Electro-hydraulic tilting system * Lower comfort bed + PremiumComfort mattress * Mattress topper * Drawers under bed & under console * Storage above windscreen, side compartments, rear luggage shelf * Velour seat covers (driver/passenger/centre seat) * Driver’s comfort air-suspended seat * Passenger multifunction seat * Leather steering wheel * StyleLine interior * Carpet covering on engine tunnel * Electric sunroof * Sound and heat insulation in cab * Additional hot water heating system * Automatic climate control * Electric stationary air conditioning * Residual heat utilisation * Smoke detector + smoker’s package * Side sun blinds * Curtain across bed area * Refrigerator in drawer * Notebook holder 2. Engine & Drivetrain * OM471, inline 6, 12.8 L, 390 kW (530 HP), 2600 Nm * Euro VI E generation OM471 * High Performance Engine Brake * Air intake behind cab * G 281-12/14.93-1.0 transmission * Mercedes PowerShift 3 + PowerShift Advanced * Single-plate clutch Rcsdpfxozv Dhnj Ac Tsf * Predictive Powertrain Control * Driving program economy/power 3. Chassis, Axles & Steering * Front axle 8.0 t, 2-leaf * Rear axle hypoid 13.0 t, ring gear 485 * Axle ratio i = 2.733 * Servotwin steering * Direct steering * Front axle stabiliser * High-strength frame, U-profile, hole matrix 50×50 * Frame overhang 1050 mm * 3-piece fenders + EC-compliant spray protection * Underbody & side panels aerodynamic 4. Brakes & Safety * Disc brakes on front and rear axles * Electronic braking system (ABS/ASR) * Electronic air supply (medium) * Heated air supply system * Condensation monitoring * Electronic parking brake * Burst pipe safety system * TSA trailer stability control * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Proximity control assist * Attention Assist * Traffic Sign Assist * Tyre pressure monitoring * Driver airbag * Speed limiter 90 km/h * Cruise control * First aid kit, warning triangle, warning light, hi-vis vest 5. Electrics & Electronics * AGM batteries 2×12 V / 220 Ah * Alternator 24–30 V / 150 A * Battery sensor * Various 12 V/24 V sockets * PSM 2nd generation * FMS interface * Engine start/stop * Switches for body electrics (No.1 & No.2) * Reversing warning system * Air suspension remote control (wired) * Pre-installation for electrical equipment * Pre-installation lift axle * Truck Data Center 8 * Multimedia cockpit interactive * Navigation system * Digital radio + sound system * CB radio 24 V * Reversing camera at rear of towing vehicle * Preparation for toll system * Preparation for Truck App Portal 6. Lighting & Visibility * LED daytime running lights * LED main headlights * LED tail lights * LED indicators (signature lighting) * LED work lights (lower, centre) * Headlamp cleaning system * Heated front mirrors * MirrorCam + chrome brackets * Light sensor & rain sensor * Air horns * External transparent sun visor * Preparation for beacons * Preparation for roof auxiliary lights 7. Tanks & Exhaust System * Main tank 570 L aluminium, left * AdBlue tank 75 L left * Lockable tanks * Protective cap for AdBlue dosing system * Exhaust system right side, horizontal 8. Wheels & Tyres * Front: 385/55 R22.5 on Alcoa Dura-Bright 11.75×22.5 * Rear: 315/70 R22.5 on Alcoa Dura-Bright 9.00×22.5 * Wheel nut covers 9. Fifth Wheel & Superstructure * SAF GF SK-S 36.20 fifth wheel coupling * Low-maintenance * Fifth wheel height 150 mm * Mountin

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight: 420 kg Availability: at short notice Rcjdpfx Acezk Nuve Tsf Location: DE-63934 Röllbach

Condition: used, Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: - Drilling spindles: 21 - Pitch: 32 mm Rcodpfjztvx Tox Ac Tjf - Passage width: max. 1,000 mm - Swivel mechanism: pneumatic - Fax: , Mobile: , Machine No. 208695, Jan 2011, Cost price €1,000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, purchase price €500

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Slot drilling machine, like new, hardly used. Rcedpfx Acsy Tk Ufs Tef

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Rodpsxzp Rlofx Ac Tjcf Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid Rcodpjzk N Dwefx Ac Tsf - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 - Hold-down units: 3 Rcjdpozryy Sjfx Ac Tjf - Pressing area: 260 x 145 cm

Condition: good (used), Year of construction: 1989, functionality: fully functional, total width: 14,600 mm, total length: 35,350 mm, total height: 18,700 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Rcjdpfx Ajtzwzxjc Tof Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Power of main motor 7,5 kW Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Redpfx Ajyuty Soc Tecf Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 08/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,460 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, a different engine, different dimensions, or something else? Please do not hesitate to contact us. We offer financing and leasing on attractive terms – also for the Netherlands, Austria, and for start-ups! ----Vehicle: * 176 hp (129 kW) Euro VI-E diesel engine * HI-MATIC 8-speed automatic transmission * Wheelbase: 4,100 mm * Rear-wheel drive * Twin tires on the rear axle * Air suspension on the rear axle * Standard suspension on the front axle * C-profile steel ladder frame * Fuel tank 90 liters * AdBlue tank 20 liters * Tires 225/75 R16 all-season tires * Steel rims Technology / Comfort: * Luxury driver's seat * Hydraulically sprung driver's seat * Seat heating driver * Armrest driver's seat * Lumbar support driver's seat * Rear wall insulation * Cab rear wall with window * Roof storage compartment above the windshield * Electrically adjustable & heated exterior mirrors * Electric windows * Central locking with remote control * Light & rain sensor * High beam control * Comfort noise insulation * Grab handle on the A-pillar * Seat covers fabric * Trailer socket 12V / 13-pole * Rear view camera * Additional vehicle key with remote control * 12V connection for windshield OBU * Smoker's package * Aluminum radiator * Heated fuel filter * Heated crankcase ventilation * Diesel particulate filter * HVO / GTL fuel approval Safety: ESP * AEBS + City Brake * Cornering Assistant (BSIS) * Blind Spot Radar * Pre-collision monitoring (MOIS) * Proactive Lane Keeping Assist (ELK) Rcodpfx Acoy Nuu Uo Tsf * Traffic Sign Recognition (ISA) * Extended Driver Attention Alert * Front airbags driver & passenger * Seat belt pretensioner passenger * Seat belt warning system driver & passenger * Tire pressure monitoring system (TPMS) * Speed limiter 90 km/h * Additional speed limiter * Daytime running lights * Accident data recorder * Wheel chocks (2 pieces) * Side marker lights * Splash guards front axle COMFORT PLUS Package: * 10" MyIVECO infotainment system with navigation * Alexa voice assistant * USB sockets driver & passenger side * Passenger seat bench with multi-function storage and compartment * Fog lights * Automatic climate control * Pollen filter * Outside temperature display * Adaptive Cruise Control (ACC) * Air conditioning compressor 170 ccm * Comfort headrests STYLE Package: * Full LED headlights * Leather steering wheel * Radiator grille with chrome inserts Infotainment: * AIR PRO controls * Connectivity Box 4G * Digital tachograph 4.1 Other: White (IC 194) * Daily model year 2026 * Easy Daily App * Vehicle monitoring & remote assistance * Over-the-air updates REFRIGERATED BOX * 2.46 meters interior width * Floor reinforced * Two rear doors with separate closure and 270° opening angle * Side door with separate closure and step * Second probe for multi-temperature * Combined anchor lashing rail (1 left & 1 right) * 1 lashing straps * Interior and exterior lighting LED * Roof spoiler * Drain holes in the box front * Double sealing system at the loading openings * Rear view camera * Lateral underrun protection * Aluminum wheel arches with mud flaps * Side marker lights REFRIGERATION UNIT * ThermoKing V500X (-20°C to 20°C) * Driving & stand-by cooling * With heat pump * Temperature recorder (thermograph) * ATP certificate possible TAILGATE LIFT Dhollandia * DH.LM10 * Load capacity 1000 kg * Platform depth 1800 mm * Roll-off protection

Condition: excellent (used), functionality: fully functional, TRIADE FR3 S Drilling Machines for Turned Parts Number of drilling units: 3 1. Lower unit: 3 kW 2. Upper unit: 1.5 kW 3. Lower unit: 1.1 kW (can also be used for screwing in sleeves/screws) Rjdpjznmlyjfx Ac Tocf Pneumatic material clamping system Application: Drilling of legs, turned parts, curtain rail components Weight: 1200 kg Dimensions: 115 x 128 x 180 cm (H)

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 08/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Are you looking for a different model, engine, dimensions, or other features? Feel free to contact us. We offer financing and leasing at attractive terms - also for the Netherlands, Austria, and new businesses! Vehicle: * Wheelbase: 4490mm * 6-speed manual transmission * Single cab * 3 seats * Twin rear tires * Gross vehicle weight 5 tons * Speed limiter 90 km/h * Digital tachograph 4.1 Technology/Comfort: * Infotainment package "Discover Media" * 10" Touch color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * Light and Visibility Package * LED headlights * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * Manual air conditioning * Digital cockpit * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Storage package 2 * Lockable, illuminated glove compartment Rcsdpfx Acsw Erb Rs Tef * Electrically adjustable & heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Robust fabric upholstery "Marathon" * Fog lights with cornering function * Battery switch * Electrical connection rail Safety: * Winter tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Tool kit and jack * Daytime running lights * Spare wheel Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking and 270° opening angle * Side door with separate locking and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drainage holes in the front of the box * Double sealing system on the loading openings * Rear view camera * Side underrun protection * Wheel protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and parking cooling * Thermograph * ATP certificate possible Additional extras for the body are available at an extra cost. Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Custom construction on request possible. Your vehicle partner since 1996. Call or email now - we look forward to hearing from you! No liability for printing and typographical errors Errors and prior sale excepted Best regards Pimenta Automobile

Condition: excellent (used), functionality: fully functional, Deep Hole Drilling Unit / Deep Hole Drill Manufacturer: POREBA Type: Deep Hole Drilling Attachment / Drilling Rig Condition: Used, good technical condition Technical Data Feed stroke: up to 900 mm Weight: approx. 780 kg Electrically driven feed system Heavy-duty industrial construction Integrated control panel Complete unit with drive motors Rcsdpfx Aozcvuuec Tsf Description Offered for sale is a robust deep hole drilling unit manufactured by POREBA. The attachment is suitable for installation on large conventional lathes or special-purpose machine tools and features an electrically driven feed system with a travel of up to 900 mm. Its rigid construction provides excellent stability and precision during deep hole drilling operations. The unit is supplied complete with drive motors, control panel, and mounting components visible in the photographs. Advantages ✔ Heavy-duty industrial design ✔ Feed travel up to 900 mm ✔ High rigidity and stability ✔ Electrically driven feed system ✔ Suitable for deep hole drilling applications ✔ Proven POREBA engineering Transport Approximate weight: 780 kg Loading assistance available

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm Rodpfx Aszav Hroc Tecf -Dimensions: see photos -Number: 4x mounting brackets available -Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Redpew U Uhkjfx Ac Tjcf Counter Rotation

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Redortrx Rjpfx Ac Tocf Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Rcedoium Stspfx Ac Tjf

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 08/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or anything else? Feel free to contact us. We offer financing and leasing at attractive conditions - also for the Netherlands, Austria and new entrepreneurs! Vehicle: * Wheelbase: 4490mm * 6-speed manual transmission * Single cab * 3 seats * Twin rear tires * Gross vehicle weight 5 tons * Speed limiter 90km/h * Digital tachograph 4.1 Technology/Comfort: * Infotainment package "Discover Media" * 10" touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * Light and Visibility Package * LED headlights * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * Manual air conditioning * Digital instrument cluster * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Storage package 2 * Lockable, illuminated glove compartment * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Robust fabric upholstery "Marathon" * Fog lights with cornering function * Battery switch * Electrical connection rail Safety: * Winter tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Tool kit and jack * Daytime running lights * Spare wheel Rodpfx Asw E Akisc Tocf Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking and 270° opening angle * Side door with separate locking and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the box front * Double sealing system on the loading openings * Rear view camera * Side underrun protection * Wheel arch protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and parking cooling * Thermograph * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000Kg * Platform depth 1800mm * Roll-off protection * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball head, trailer coupling socket 12V 13-pole) Additional extras for the superstructure are available at an extra cost. Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization possible upon request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors Errors and prior sale excepted Kind regards Pimenta Automobile

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Rcedpfjxnlfljx Ac Tof