Used Stanze Punching Machine for sale (63,795)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 57,504 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, AUTOMATION - SheetMaster - loading and unloading in parallel with main time - Toolmaster 70 - setting up in parallel with main time - GripMaster with scissor lift table - Good part conveyor TECHNICAL DETAILS Travel paths X / Y: 2500 / 1250 mm Sheet thickness: 8 mm Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Workpiece weight: 200 kg Control: Siemens Sinumerik 840D  Part flap: 500 x 500 mm Speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis: 500 rpm Stroke sequence punching / marking: 1600 / 3000 1/min Position deviation Pa: ±0.1 mm Position spread Ps: ±0.03 mm Linear magazine: 21 tools with 3 clamps Tool change time for single tool / multi-tool: 3 / 0.3 s MACHINE DETAILS Space requirement: 6,760 x 6,100 mm Average power consumption: 9.5 kW Operating hours: 57,504 h EQUIPMENT - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping clamps - Foot switch for clamp closing - Good parts container - Hydraulic single tool holder, 360° rotation - Manually adjustable holding down force - Programmable holding down device - active/passive/repositioning - Spray lubrication of punch - Punch slug extraction - Level monitoring for thread forming and tool lubrication - CE marking - Multi-beam light barriers - Quick shutdown of hydraulics - Bulge detection ADDITIONAL EQUIPMENT - Function MultiTool - MultiBend function - Thread forming function - Roller technology function - Marking - Multishear - Adaptive stroke calibration - Active die Bedsvxi Suspfx Af Ejcu - Repositioning cylinder - Spray lubrication of die with level monitoring - Repositioning cylinder - Sensor for parts chute - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Bcedpfx Afjh T Ulye Eju Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Bcodpfx Afewcxccs Eju Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Bodpfx Afjxhfu Hs Eecu Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Bsdpexhfnajfx Af Eecu Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Bcedpfx Afsvhcgqj Eju Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Centerline Micrometer setting in production

Condition: good (used), Year of construction: 2008, functionality: fully functional, BRAUSSE 1450 SE Year: 2008 Max. size: 1055 x 1450 mm Max. cutting force: 400 t Max. speed: 5500 Sh/h Quicklock system Centerline in production Bodpfx Aot D Ncajf Eocu

Condition: good (used), Year of construction: 2002, Bobst SPO 160 ER - Matic Year: 2002 Max. Size: 1620x1120 mm Bcedpfx Aswxu Iyjf Eeu - Prefeeder Bobst C-160E Matic - Transfer and aligning section with side and front alignment - Die-cutting section with Centerline - Stripping station with Quick Lock System - Blanking station with Quick Lock system - Chase loader for preparation of the cutting die outside the machine - Integrated palletizer with batch control unit - Computer with Matic setup and control system

Condition: ready for operation (used), Mechanical press/eccentric press by Stankoimport, model: 2225 (СТАНКОИМПОРТ Модель 2225). Material capacity: sheet thickness/width 18/190mm, max. tensile strength 500MPa. An inspection can be arranged by appointment. Bodpfx Aoxtprysf Ejcu

Condition: used, Year of construction: 1995, Comm. no.: Lg 33021 Double column punching machine KAISER KSTU 2500 Year of manufacture 1995 Machine no. 131 720 Technical data pressing force max. 2.500 KN Stroke rate max. 20 to 120 min.-1 column passage left-right 1.500 mm table area 1.500 x 1.100 mm Clamping plate 1,500 x 1,100 x 150 mm Passage in clamping plate mm Milling in clamping plate mm Plunger area 1.500 x 900 mm Installation height with max. stroke at bottom approx. 550 mm Stroke adjustable 20 to 160 mm ram height adjustment 100 mm connected load approx. 70 KW electrical equipment 400 V / 50 Hz weight approx. 35.000 kg dimensions (L x W x H) approx. 4,000 x 3,100 x 4,120 mm Equipment and accessories Bodpfxoivpi Uj Af Escu electronic. Roller feed KAISER KWV 600 Z passage width max. 600 mm strip thickness 0.5 to 4.0 mm material cross section max. 1.800 qmm Roll diameter 120 mm Feed length max. 9,999.99 mm Intermediate ventilation hydraulic Off-center strip run ± 20 mm

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm Bjdpfx Ajnr Ex Tef Eocu 1x 2-fold tool - diameter 93.80x120.90mm

Condition: good (used), Year of construction: 1982, Table width 1.8 m Strokes per min. 30 - 150 Weight 47.000 KG Bodpfx Afovi Iimo Eocu

Condition: excellent (used), Year of construction: 2004, with soundproof booth Table surface 1000x550 mm, ram surface 1000x450 mm Bcedji An Ttopfx Af Eeu

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear Bedpforknnfjx Af Escu - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Bcjdpji Duh Iofx Af Eeu Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Bodpfx Afeh U Dtus Eocu Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 Bedpfx Afevh Ndpe Eecu ATC 22 Pos total power requirement 7,5 kW

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Bjdpfew Tri Nsx Af Eocu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Bcodpeuh U Etsfx Af Eju Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Bcjdew Trkaopfx Af Esu Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Bodpfx Asw Trkgof Eocu

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Bedjtvnlbopfx Af Eecu Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 170610, Stamping machine with heated stamping head Bsdpfx Ajxy Rk Dsf Escu

Year of construction: 2010, operating hours: 640 h, condition: ready for operation (used), This ERMAK EPP 1270 was manufactured in 2010. A CNC punching machine in excellent condition, it has been used for only 640 hours. Regularly maintained and fully functional, it is ready for any type of inspection and testing. Includes a tool sharpener and numerous tools. Reach out for more information about this machine. Bcsdjx Enk Uepfx Af Esu Application Types Punching

Condition: excellent (used), Year of construction: 2014, HMB rotary punching machine working width 125cm, 400v power supply Bsdevdyinjpfx Af Escu