Used Srew Compressor for sale (3,238)

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Ijdpfx Aotpct Neatoif

Year of construction: 2014, condition: ready for operation (used), Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible. Iiodpjzipgvsfx Aatjf

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Iodpfx Aajulkvdeteif

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Iisdpjudy Sdjfx Aatjf

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Iisdpexdc Uvsfx Aatsf

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Iijdpfx Aowfg Hhjatof

Year of construction: 2017, condition: ready for operation (used), An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible. Ijdpoynltksfx Aatjif

Condition: ready for operation (used), Year of construction: 2023, A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Iodpexu I Ddsfx Aatjif

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Isdpfjzhw Tzsx Aatoif

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Iiodpfxezh Nizs Aatef

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Iijdsxmkc Tjpfx Aatef

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Isdpoxph Nvjfx Aatsif

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Iiedpfxjxu I A Tj Aatof

Condition: ready for operation (used), Year of construction: 2022, An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement. Isdjzlkapopfx Aateif

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Serial: 2268 2010, 2.2Kw, 11.0Bar, 3Ph Isdpfx Aasuqckketjif

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Serial: 2266 2010, 2.2Kw, 11.0Bar, 3Ph Iiodpjuqckdofx Aatjf

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Iisdoy Ecuzspfx Aatef Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Iodsy Ecu Uepfx Aatsif Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a Iiodpszt Srisfx Aatef The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Iodpfjxzg Sasx Aatoif Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment.

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor 225 Kw Year 2012 Iodpju Ic Ryjfx Aateif

Condition: good (used), Year of construction: 2008, Ingersoll Rand screw compressor 110 Kw Year 2008 Iisdpou Idnaefx Aatsf

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Iedoziukyopfx Aatoif Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Iijdpfx Aasg A Hcuetsf

Condition: used, Bar max: 8 m3/h: 211 Iodpfxjc Sc E Rj Aatoif KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465