Used Spiral Bevel Gear Cutting Machine for sale (72,896)

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 Itodjwrh H Nopfx Achok C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Year of construction: 2016, Amada M2 RI 3015 for sale Low hours Full service completed with Amada 4Kw Resonator Dust extraction Chiller Compressor Latest Amada touch screen control Erwin Sick perimeter guards Head clean system Itjdpfx Aezh E Hvechek Really good machine.pplease feel free to contact me if you have any additional questions open this machine. Thankyou for taking time to look at this CO2 laser with rotary system

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Ijdpfxoyvk R Ej Achetk Electrical data: max. 6 kW / max. 32 A Previous application: Cutting of acrylic glass Laser source renewed in 2021 ä3826

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000 - 5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Iodpfox Eh Drox Achotk Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser cooler: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3826

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 Iedpfsw El Udjx Achjtk CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 3826

Condition: used, Polar 55EM paper cutting machine. Ijdpfxeztanfj Achotk

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, laser type: fiber laser, laser power: 80,000 W, table length: 31,500 mm, table width: 6,300 mm, travel distance X-axis: 4,050 mm, travel distance Y-axis: 25,050 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 55,000 kg, total length: 34,000 mm, total width: 12,000 mm, Equipment: cooling unit, safety light barrier, Working area (mm) : 26000×3500（Bevel cutting：25500×3000） X axis travel distance (mm): 4050 mm Y axis travel distance (mm): 25050 mm Itedpfx Acsv E Hwzjhok Z axis travel distance (mm): 450 mm X/Y axis positioning accuracy : ±0.03 mm/m X/Y axis repeat positioning accuracy: ±0.02 mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2 G It can support cutting of various groove types such as V, Y, X, etc., with a maximum groove of ±45° and one-time forming, reducing the number of beveling processes, reducing costs and increasing efficiency.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs Itodpfxewvpcms Achek

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, compressed air connection: 10 bar, overall weight: 11,700 kg, total length: 9,229 mm, total width: 6,145 mm, total height: 2,200 mm, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, safety light barrier, We offer this used TRUMPF TruLaser 3030 laser cutting machine, manufactured in 2007. Isdpfozt I U Hox Achetk Laser power: 3200 W Machine no.: A0220A1818 Year of manufacture: 2007 Power supply: 400 V / 50 Hz Connected load: 73 kVA Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2012, condition: used, The GM PN100S model is an automatic core cutter for cores with a maximum length of 100 cm. The device is operated via a touch display. Max. wall thickness: 10 mm Core inner diameter: 25 mm (1") - 120 mm (4.7") Itodpfxozq U Unj Achek Includes the following core adapters: 40, 50, 76 and 100 mm.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 3171, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, Bylaser 4400. CO2 laser. Sheet metal thickness: steel, 20 mm. Itodpozvncisfx Achjk The sheet metal laser is being sold due to the purchase of a new laser. Very few operating hours (see photo). Includes cooling unit. Complete documentation is available. Regular maintenance performed. Dust extraction system, manufacturer Donaldson DFPRE4L-R, can be purchased separately (see separate listing). Without vacuum suction unit. Can be inspected while powered on until September 14, 2026. No dismantling included. Dismantling must be organized independently. Dismantling must be completed between September 15 and 17, 2026.

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 Iedpfx Acezq Hmcjhetk adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: TK4S35322107121, working width: 3,200 mm, cutting speed: 90,000 mm/min, sheet thickness (max.): 50 mm, working length: 3,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Suitable materials: corrugated cardboard, cardboard, foam boards, films, label material, textiles, honeycomb panels, and other non-metallic materials Previous area of application: textile cutting Working area: 3,500 x 3,200 mm Iedozpxg Espfx Achjtk Max. material thickness: 50 mm Max. working speed: 1,500 mm/s MACHINE DETAILS Condition: disassembled Rated voltage: 380 V Mains frequency: 50/60 Hz Rated power: 24.38 kW EQUIPMENT - Vacuum table - Powered rotary tool - Drag knife - Pin tool - Camera system - Conveyor system - Roll loading device - Workstation with computer and software

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks Iodpfxegqkc No Achetk without table without filter

Condition: good (used), Year of construction: 2008, Offer 26696 Technical specifications (approximate): - CNC flame cutting machine with 2 torches, as shown in the image - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m Isdpszvnb Sjfx Achotk - Support table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons

Condition: used, Year of construction: 2011, laser hours: 68,800 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, We are offering this used TRUMPF TruLaser 3040 laser cutting machine, manufactured in 2011. Material number: 1441919 Control cabinet: TruLaser 3040 Power type 3: 50 Hz Voltage: 400 V Max. fuse rating: A Wiring diagram / version: 93730-5-210_05 Wiring diagram / version: 93730-5-2000_05 Wiring diagram / version: 93730-5-3000_05 Serial number: 933 Ijdpfx Acjzvbhxohstk Year of manufacture: 2011 Equipment number: A1240A0148 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Smart automation features include: Itedpfx Acsw U D E Eshsk Automatic loader handling up to 13 lengths Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpfey Auy Rjx Achetk Lukas van Rossum

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Itsdpodzp T Tjfx Achsk Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Year of construction: 1999, condition: used, Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement. Ijdpfx Aszun U Ajchjtk

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Isdpsyvd Uijfx Achstk Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Ijdpettv T Sjfx Achjtk

Year of construction: 1999, condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Iodpfxouui Eco Achotk

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Isdpfx Ajy Rtf Ujchotk

Year of construction: 2022, condition: ready for operation (used), A relatively new CNC waterjet cutting system Intermac is available. Working dimensions X/Y: 3000mm/2000mm, operating hours: approx. 4500h. Documentation available. An on-site inspection is possible. Itedpfx Aoy E S Eiochjk