Used Sorting for sale (702)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). Chedexf Up Uopfx Abbsf The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: good (used), Sorting plant, sorting conveyor belt, sorting behind an optimizing saw. Conveyor belt length: approx. 8,000 mm conveyor belt width: approx. 250 mm Cedpfx Aog Ufnxebbohf working height: without feet Drive: without motor 5 pcs. pneumatic buffers Belt is disassembled, because of transport, cables and hoses have to be made new.

Year of construction: 2003, condition: good (used), Sorting line with 23 pockets and wood chipper Chsdpfx Aboxuh Sbsbof

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Chodpfx Ajurhx Nobbef Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake Csdegvu Aljpfx Abbehf - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: good (used), Vibratory bowl for screwing technique Cup diameter 320 mm Cjdpeg Anduefx Abbshf

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed Csdpfx Aeux Shvsbbohf - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Chsdpfx Ajqmizdjbbef Working height: 850 mm Drive: Rexroth servo more available also other length

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, As a floor-free overhead conveyor system in the light-duty class, the modular mtr system offers an efficient solution for automated transport in industrial settings. It is highly versatile, suitable for carrying hanging items such as garments on hangers or piece goods like seat covers in transport bags, with compliance to the psb hanger standard being essential for compatibility. The mtr system is specifically engineered for demanding transport, buffering, and sorting tasks, and enables fast, automatic access to each individual item within the system. Installation is space-saving, directly mounted to the ceiling or an appropriate supporting structure. Capacity: ● 14,000 bags ● 7 dynamic buffer carousels ● 6 batch buffer lanes ● 1 bypass conveyor ● 9² matrix sorting, two-stage ● Workstations: 3 bag loading stations, 16 packing stations Performance: ● 2,400 items/hour Technical Description of the mtr System: The mtr system is a highly flexible power & free system, utilizing the micro trolley (mtr) as its central load carrier. Its three-dimensional rail system allows for flexible routing, even on gradients of up to 30 degrees. With an impressive system performance of almost 8,000 carriers per hour on a transport line, it guarantees high throughput rates. Automated material flow is enabled by pneumatically actuated entry and exit switches, available as passive gravity and horizontal switches or as active, motor-driven horizontal switches. Additional functional elements such as non-driven gravity tracks for buffering, accumulation, and transfer tasks, pneumatic stop units, and pneumatic trolley separators with trolley scanners for precise destination control and sorting make the mtr system a comprehensive solution. Technical Specifications: ● Maximum load weight: 3 kg ● Maximum dimensions (HxWxD): 550 mm x 380 mm x 130 mm* ● Maximum average diameter (mixed goods) per metre: 70 mm ● Restriction for small goods: Fewer than 3% of items may be under 150 mm and these should not follow directly after one another. ● Accumulation length (unladen): 22 mm Power Supply Data: ● Mains voltage: 3x400 VAC ● System type: TN-S ● Main supply fuse: 100 A ● Power rating: 43 kVA ● Operating voltage: 400 V AC Chjdpfx Absw Ealqobef ● Frequency: 50 Hz ● Rated current: 62 A ● Short-circuit current: 10 kA ● Control voltage: 24 V DC ● Degree of protection: IP 54

Condition: used, Technical Data Length: 5900 mm Width: 1100 mm Height: 1750 mm Power: 3000 W Power supply: Electric, 400V 50Hz 3N Unit after complete overhaul, new cutting tables fitted Belt width: 500 mm Cedexdvp Tspfx Abbshf Lower table dimensions: 480×5200 mm Upper table dimensions: 320×5200 mm

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Chodpsiqk Aqefx Abbof

Condition: good (used), Pot diameter 600 mm Vibration: adjustable Codpfx Aboh Rfffebehf

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Chsdpfx Abeuqrahebef Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: used, Board sorting / sorting boxes / track wagon sorting consisting of: - Board elevator - Conveyor belt - Spiral roller conveyor - Manual sorting boxes (10 track wagons) Codpfsxvz N Aex Abbohf

Condition: good (used), functionality: fully functional, Year of construction: 2003, The system was used for sorting frozen fruit to remove foreign objects. For further detailed technical information, please refer to the PDF. Subsequently, weighing and packaging into tubular bags is carried out. Process sequence: Transport via inclined conveyor to the vibrating table for singulation of the fruits. Then to the BEST Laser System LS 9000, which detects foreign objects and ejects them using approximately 80 air nozzles. The laser can be reprogrammed by running so-called good products (i.e., defect-free goods) through the machine. By analyzing a point cloud of the surface structure, the laser learns what constitutes good or bad products. Afterwards, the product passes over a conveyor belt with a metal detector and visual inspection. Then again via an inclined conveyor for weighing and filling into tubular bags, with a maximum bag weight of 30 kg. The tubular bagging machine is also manufactured by Vollenda. Chjdpfxowrdfus Abbsf Complete documentation is available. Additional technical data can be found in the PDF documents (original invoices). Original price of the system was €382,000; few operating hours.

Condition: used, Dry board sorting line ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Chedpfx Asxyixasbbof Year of production: 2000 Electric cabinets renovated 2022

Condition: not inspected (used), ISS 100 with vibrating chute and control cabinet more photos to follow the sorting machine will be handed over in working order sorting tests in manual feeding method can be carried out Chjdpfx Absv Duv Njbjf

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Cedpfxsr Hbcfj Abbohf Rema system with measuring frame type 9001 Hydraulic log kickers

Condition: used, Step Conveyor, Step Lift Conveyor KÖBERLEIN & SEIGERT Type A 400 / 2000 Feeding technology, feeding system, incline conveyor, angled conveyor, steep incline conveyor Serial No. Year of manufacture 2003 Slider width 400 mm Slider thickness 40 mm Conveying steps 10 units Transfer height at incline conveyor 2200 mm Transfer height lateral at the feeder 1800 mm Filling height 750 mm Conveying angle 75° Motor power 1.5 kW Motor speed 1450 rpm Power supply 400 Volt, 50 Hz - Low-wear sliders - Electromechanical drive - Counter-rotating slider system - Driven by three-phase motor Csdpfstqwryox Abbshf - 4 height-adjustable feet Required space L x W x H 2000 x 1600 x 2500 mm Weight approx. 1400 kg Good condition

Condition: used, We are selling a sorting system together with a BOLLEGRAAF HBC 100 horizontal baler. Cjdpfxsxx S R Ns Abbohf Sorting line for secondary raw materials Equipment: 1. Slow-speed infeed conveyor - Belt conveyor - Belt width: 1.3 m - Equipped with frequency inverter (speed controller) 2. Horizontal sorting conveyor - Belt conveyor - Belt width: 1.22 m - Total belt length: 21.5 m - Equipped with frequency inverter (speed controller) 3. Sorting bins - Quantity: 6 pcs All conveyors are equipped with frequency inverters for belt speed regulation. This allows the process to be adjusted according to the type and volume of material being processed. BOLLEGRAAF HBC 100 BALER DATA: Manufacturer: Bollegraaf HBC 100 Main motors: 2 x 40 HP Auxiliary motors: 2 HP Hopper size: 1.6 m x 1.1 m Pressing force: 100 tons Pressing cycle time: 22 seconds (full cycle) Press plate pressure: 50 tons Bale size: 1.1 m x 800 mm x variable Number of tying wires: 5 Bale weight: approx. 600 kg Throughput capacity: 10–40 t/h BOLLEGRAAF HBC 100 BALER Dimensions: Length: 11,740 mm Width: 2,250 mm Height: 2,250 mm Weight: 30 tons We have a video demonstrating the operation of the sorting line! PRICE ON REQUEST!

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 4870 mm (470 + 3700 + 700 mm) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Chedpfx Ael Dw U Ssbbof Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Condition: ready for operation (used), The machine is fully functional, with a new belt and valve maintenance, 128 valves. Codpfx Asw Ufyksbbjhf

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! Chsdpfx Abswav R Sebjf If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 6200 mm (690 + 5280 + 230) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V Csdpfx Asl Dxawobbohf The indicated price applies to one piece.

Year of construction: 2011, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 3950 mm (1050 + 2300 + 600 mm) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Csdpfxol Dw Uvj Abbehf Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.