Used Solid for sale (3,433)

Condition: used, Year of construction: 2001, Industrial cooling lubricant or oil cleaning system Belt filter system for cleaning cooling lubricants with cooling unit The system is a centralised system for cleaning and processing cooling lubricants or oils used in metal-cutting production (e.g. grinding, milling, turning) It combines mechanical filtration (belt filter), liquid storage and temperature control by means of an integrated cooling unit. General information Machine type: Centralised system for cooling lubricant preparation Filter unit manufacturer: KNOLL Maschinenbau GmbH, Bad Saulgau Type: PF160 / 200 Year of manufacture: 2002 Reference number: 80.0917 Manufacturer cooling unit: HYFRA Industriekühlanlagen GmbH, Krunkel Type: TRK 50 EF-SS Serial number: Chiller year of construction: 2001 2. technical data - chiller (HYFRA TRK 50 EF-SS) Cooling capacity: 2000 W Max. Ambient temperature: 37 °C Permissible operating overpressure: 29.5 bar Refrigerant: R 407c Voltage: 3~ / PE / 400 V Frequency: 50 Hz Max. Operating current: 5.9 A Rcodpfxjy S D E Us Ac Tef Connected load: 3.3 kW Water filling weight (total): approx. 160 kg 3. function & area of application The system is used for centralised cleaning, cooling and recirculation of cooling lubricants or grinding oil in metal-cutting operations. It consists of a belt filter module (KNOLL PF160/200) for the filtration of solids and chips, a cooling unit (HYFRA TRK 50 EF-SS) for temperature control of the liquids Translated with (free version)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Rjdevvx Hiopfx Ac Tocf Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Rcsdpfx Aoxgu R Ijc Tjf Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: ready for operation (used), Year of construction: 1999, Panel sizing and solid wood saw manufactured in 1999. This PANHANS 693 / EURO 5 features a maximum cutting width of 4200 mm and is equipped with an air cushion table for enhanced efficiency. The machine includes a main saw, scoring saw, and automatic feed system. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS 693 / EURO 5 machine we have for sale. Contact us for further details. PANHANS 693 / EURO 5 • Machine Type: Panel Sizing and Solid Wood Saw • Nominal Voltage: 400 V • Current Type: 3-Phase AC • Operating Current: 34 A • Frequency: 50 Hz • Control Voltage: 24 V AC/DC • Back-up Fuse: 35 A • Maximum Pneumatic Pressure: 8 bar • Control Unit Brand: ELINDE • Control Unit Model: EL1 • Electrical Components • Feed Drive: Lenze • Rip Fence Servo Drive: Lenze • Safety Relay: Pilz • Power Supply: Siemens SITOP PSU100S Machine Functions Rodpfezuhddex Ac Tecf • Main Saw • Scoring Saw • Feed Drive • Rip Fence Servo System • Automatic Feed • Rip Fence Additional Information • Machine was only lightly used • Equipped with new Siemens control boards • Maximum Cutting Width: 4200 mm • Air Cushion Table • New Spare Saw Blade • Condition: Good

Condition: used, thickness of jaw 160 mm Precision Machine Vise / Toolmaker’s Vise with Hand Crank – Heavy Duty Industrial Model For sale is a high-quality precision machine vise in solid industrial design. Perfect for milling machines, grinding machines, toolmaking, or other precision clamping applications in workshops and industrial environments. This vise features a robust construction, precise guide system, and strong clamping force. The hardened and ground jaws include prism inserts, allowing secure clamping of round workpieces as well. Details: Heavy-duty steel construction Precision-ground clamping surfaces Hand crank spindle drive Prismatic jaws Very stable and heavy industrial design Ideal for toolmaking, milling, grinding machines, etc. Used, fully functional Normal signs of use (see pictures) Condition: Rsdpfjy Umh Rex Ac Tjcf Technically in perfect working condition. Cosmetic wear consistent with age and use, but overall in good condition. Scope of Delivery: Machine vise as shown in the pictures

Condition: used, thickness of jaw / mm Precision Machine Vise / Toolmaker’s Vise – Heavy Duty Industrial Model For sale is a high-quality precision machine vise in solid industrial design. Perfect for milling machines, grinding machines, toolmaking, or other precision clamping applications in workshops and industrial environments. This vise features a robust construction, precise guide system, and strong clamping force. The hardened and ground jaws include prism inserts, allowing secure clamping of round workpieces as well. Details: Heavy-duty steel construction Precision-ground clamping surfaces Hand crank spindle drive Prismatic jaws Very stable and heavy industrial design Ideal for toolmaking, milling, grinding machines, etc. Redjy Umihspfx Ac Tecf Used, fully functional Normal signs of use (see pictures) Condition: Technically in perfect working condition. Cosmetic wear consistent with age and use, but overall in good condition. Scope of Delivery: Machine vise as shown in the pictures

Condition: used, mileage: 50,300 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 2,800 kg, wheelbase: 3,200 mm, color: white, number of seats: 2, loading space length: 2,831 mm, loading space height: 1,392 mm, construction height: 1,915 mm, working width: 1,928 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, Air conditioning system (Tempmatik), 3-button remote control for central locking, exterior mirrors electrically adjustable and heated - both, electric windows 2-way, steering wheel with multi-function buttons incl. trip computer, hill-start assist, driving assistance system: Attention Assist (fatigue detection sensor), cruise control system, speed limiter 210 km/h, reversing camera, solid partition between cab and cargo area, windshield wipers with rain sensor, daytime running lights, fog lights, DAB tuner (digital radio reception), audio navigation system Audio 40 (DAB+ - Bluetooth - USB), hands-free system, Mercedes-Benz emergency call system, heat-insulating glass, driver's airbag, front passenger's airbag, anti-lock braking system (ABS), electronic stability program (ESP), seats in the cab: driver's seat with lumbar support, start/stop system, particulate filter, fully maintained service history, sliding door cargo/passenger compartment right, immobilizer, outside temperature display, power steering, paint: ARCTIC WHITE, lashing rails in the cargo area - side wall on the partition, lining in the cargo/passenger compartment: plywood, wooden floor in the cargo area, seats in the cab: front passenger seat as a two-seater, comfort lighting in the passenger/cargo compartment, spare wheel holder under the end of the chassis incl. jack, two-way speakers at the front, BlueEfficiency package, permissible total weight 2.80 t, body/superstructure: long, exterior mirrors aspherical - both, mounting rails for roof rack, automatic activation of headlights, adaptive brake lights, windshield with antenna, communication module (LTE) for digital services, service interval display Assyst, instrument cluster with pixel matrix display, lockable glove compartment, trim for window pillars, lining in the cargo/passenger compartment: hard fiber half-height, seats in the cab: driver's seat comfort, central locking with remote control, seat belt system with warning system (driver/passenger side), seat belt system with warning system (driver side), seat belt system with warning system (passenger side), seat belt pretensioners, ceiling light in the cargo area, cup holders in the front, load securing / lashing points, brake assist system, driving assistance system: breakdown management, tires 205/65 R16C 103/101 T, steering wheel (steering column mechanically adjustable), driving assistance system: crosswind assist, fleece battery 92 Ah, generator 250 A, fuel tank: main tank 57 liters, Pro, design and equipment line PRO, body/superstructure: panel van standard, wheelbase 3200 mm, drive type: rear-wheel drive, gearbox 6-speed - TSG (Eco Gear), over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer couplings up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tailgate lift and other individual solutions for your business needs possible for an extra charge. Redpfszwdy Hex Ac Tocf

Condition: used, mileage: 29,599 km, power: 96 kW (130.52 HP), first registration: 02/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,785 mm, loading space length: 3,350 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale reserved! Internal number: 1389. RS05858 ----EQUIPMENT - 2 batteries - Airline ceiling rail with LED lighting - Tow bar, electrical prep kit - Rear double-wing doors 256°, without windows - Load area floor - wood - Package: Technology Package 6P - Exterior mirrors electrically adjustable, heated, and power folding - Blind Spot Assist incl. Cross Traffic Alert - Audio system 3 incl. navigation - Fog lights - LED downlight Pre-Collision Assist (camera and radar based) - Rear emergency braking assist - Lane keeping and lane departure warning - Advanced traffic sign recognition system - Park Pilot system front/rear - Adaptive cruise control - 360° camera - Reverse alert signal - SVO: Express Line Package - Headlights with static cornering light - Front mud flaps - Side wall trim up to the roof - Socket: 12-volt outlet in cargo area - Tachograph, digital - pre-fitted - Partition wall (metal) - Central locking with remote control - Transmission: 6-speed manual - ABS, EBD and DRIVER ASSISTANCE - Driver's airbag - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer Rjdjyqdpijpfx Ac Tscf - High roof - Headlining in driver cabin - Rear double-wing doors/180° (without windows) - Rev counter - Third brake light - Power windows front - Electronic parking brake - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delay switch - Automatic climate control - Fuel tank 70 l - Paintwork: Solid paint - Cargo area lighting - Emergency call assistant - Package: Technology Package 2 - Particulate filter: Diesel particulate filter - Radio: 12" multi-function display & Ford SYNC 4 - Tire pressure monitoring system - Wipers with rain sensor - Sliding door: right - Rear mud flaps - Side protection strips - Power steering - Seat belts - Seats: Seat Package 18A - Start-stop system - Front bumper - Partition (plastic) at B-pillar height - Rear step - Recirculation function - Lashing eyes - Immobiliser - Heat-insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment front ... and much more. ----Vehicle is unrefurbished! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to accept your vehicle in part-exchange. Financing/leasing possible even without down payment! Still have questions? We are happy to advise you!

Condition: excellent (used), Year of construction: 1985, Drilling depth 750 mm Rsdpszwhkvefx Ac Tecf Solid drilling in steel approx. 30 mm Maximum spindle speed 5,700 rpm Clamping table 1280 x 420 mm Cross-slide table Coolant tank Various accessories (drills, bushings)

Condition: used, Div 03 Heavy-duty grating, manhole cover The gratings are hot-dip galvanized, extremely stable, and suitable for high loads – ideal for: • Industrial and storage areas • Machine platforms Rcjdpfxszwdaye Ac Tsf • Maintenance platforms • Shafts and covers 👉 The robust design (see pictures) clearly distinguishes these from standard gratings. _____ Technical data (confirmed by pictures) • Quantity: 80 pieces, 5 pallets with 16 pieces each • Dimensions: approx. 100 x 490 mm • Bearing bar height: approx. 70 mm ✅ (very high load-bearing capacity) • Bearing bar thickness: approx. 4 mm • Mesh size: approx. 33 mm • Material: Steel, hot-dip galvanized • Weight: approx. 46 kg/piece, pallet 755 kg _____ Condition • Used, but very solid and ready for use • Typical storage/weather marks • No structural damage visible • Galvanization largely intact 👉 Overall: good used condition for industrial applications _____ Prices: 55 € net per piece, pallet with 16 pieces 800 €, total purchase 3,500 € Shipping possible

Condition: used, mileage: 218,050 km, power: 110 kW (149.56 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,080 kg, color: beige, gearing type: automatic, emission class: euro6, number of seats: 9, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 0942X ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options possible. Complete vehicle range available on autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively serviced at Volkswagen Like-new summer tires, front and rear Like-new winter tires, front Taxi Taximeter Body: Caravelle Long wheelbase Number of seats: 9 Automatic transmission "DSG" Electric sliding door Rearview camera Parking assistance system, front and rear Navigation system Automatic climate control, rear Air conditioning, front Sun protection blinds 8 tires Summer tires on steel rims Winter tires on steel rims ---- Special features: * Audio-navigation system Discover Media (touchscreen color display) * Multimedia interface USB (iPhone / iPod) with AUX-IN * Floor covering: Rubber (front and rear) * Floor covering in the driver's cabin: Rubber * Floor covering in the cargo/passenger compartment: Rubber * Driver assistance system: Parking assistance system, front and rear with rearview camera * Rearview camera * Steering wheel (leather) * Gear knob/selector lever, leather * Seat package: 9-seater, 3-3-3 (driver's seat and double passenger seat, 2-seater bench and single seat, 3-seater bench) * Seats in the driver's cabin: Double passenger seat * Seats in the cargo/passenger compartment: 1st row, 2-seater bench + 1 single seat * Seats in the cargo/passenger compartment: 2nd row, 3-seater bench (torsion spring suspension) * 2nd battery * Grab handles on A-pillars Rodpfx Acsxc Siae Tocf * Interior release for tailgate/rear wing doors * Isofix mounts for child seat in the rear seat * Paint: Light ivory solid color * Spare wheel in driving condition * Sliding door, cargo/passenger compartment, right, electrically operated * Seats in the driver's cabin: Driver's seat, heated * Tinted rear windows Standard features: Exterior mirrors and door handles in vehicle color, exterior mirrors in vehicle color, door handles in vehicle color, Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS and hill start assist, Driver assistance system: Hill start assistant, Air conditioning Climatic (driver's cabin), Roof liner, Comfort with air vents, Multifunction display Plus, Driver assistance system: Fatigue detection sensor, Sliding door rail cover, Airbag, passenger side, switchable, Airbag, driver/passenger side, Anti-lock braking system (ABS), Drive type: Front-wheel drive, Indicator for washer fluid level, Exterior mirrors, aspherical, left, Exterior mirrors, electrically adjustable and heated, Exterior mirror, convex, right, Turn signals, side, chrome-look, Twin headlights, Driver assistance system: Brake assistant (HBA), Driver assistance system: Multi-collision brake, Windows in the cargo/passenger compartment: - fixed, front and rear left, Windows in the cargo/passenger compartment: - fixed, front and rear right, Power windows, Freewheeling clutch for dual-clutch transmission, Windshield, laminated glass, tinted, Remote control (2) foldable, Transmission, 7-speed - dual-clutch transmission DSG, Glove compartment, lockable, Tailgate with glazing, Rear window, heated, with windshield wiper, Interior lights in the cargo/passenger compartment: Step lights, Interior fil

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg Rcjdpfx Aeyx Hgboc Tof • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line Rcsdpfozuynhjx Ac Tef - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE Rodpfx Acozuyp Sj Tscf

Condition: good (used), Year of construction: 2008, operating hours: 2,541 h, lifting height: 8,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: Batterie Siems, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, Year of manufacture: 2008 Empty weight: 3.590 kg Battery: 620 Ah, 48 V, Year of manufacture 2017, Brand of battery Batterie Siems Lifting capacity: 1.700 kg Maximum passing height: 340 cm Number of valves: 3 Technical condition: good Visual appearance: good Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - 4th valve Redpfx Acszuyuze Tjcf - Pneumatic shaped solids = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit Rcodpezuykvjfx Ac Tof 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Rodszv Sa Eepfx Ac Tscf Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: used, mileage: 67,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2023, next inspection (TÜV): 02/2026, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Business Package Navigation, Vehicle without model designation, Special paint finish Urano Grey solid Additional equipment: Storage pocket on front seat backs, Passenger airbag deactivatable, Driver and passenger airbags, LED ambient lighting, Traction control (ASR), Auto Hold function, Electrically adjustable, heated and folding exterior mirrors with tilt-down function, Grey exterior mirrors, Sunglasses compartment, Black headliner, Roof rails, Aluminium entry sills, Electronic differential lock (XDS), Driver assistance system: Adaptive Cruise Control (ACC), Driver assistance system: Driving profile selection (SEAT Drive Profile), Driver assistance system: Fatigue detection, Driver assistance system: Lane Keeping Assist, Driver assistance system: Surround Monitoring System (Front Assist) with City Emergency Braking, Electric windows front and rear, Full Link (MirrorLink, Apple CarPlay and Android Auto), Function Package, Front footwell lighting LED, Luggage compartment cover/roller blind, Illuminated glove compartment, Rear LED taillights with dynamic light strip (Infinite Light), Rear spoiler, Interior: Chrome applications, Interior mirror with automatic dimming, ISOFIX child seat anchorage points, Body: 5-door, Air conditioning Climatronic 3-zone, Driver's knee airbag, Digital instrument cluster (virtual cockpit), Head airbag system, Rear headrests (3x), Black radiator grille, Variable and removable load compartment floor, Manually adjustable lumbar support left front seat, Manually adjustable lumbar support right front seat, Multifunction sports/leather steering wheel, Headlight range adjustment, Light assistant (Coming Home, Leaving Home), Alloy wheels, Front center console with center armrest, Cup holder, Storage box and rear air vents, Engine 2.0L - 110 kW TDI, LED fog lights, Emergency call system, Aluminium pedal caps, Wheelbase 2790 mm, Tyre pressure monitoring system, Sliding rear bench seat, Low-emission under Euro 6d standard, Gear lever/selector lever grip leather, Full LED headlights, Side airbag, Tinted rear side and rear windows, Service system: Remote Services (SEAT Connect), Driver's seat electrically adjustable (with memory), Height adjustable driver's seat, Height adjustable passenger seat, Seat upholstery: Fabric / Alcantara, Illuminated sun visor left, Illuminated sun visor right, Front sports seats, Start/stop system, 12V socket front, FR-design bumpers, Lashing eyes in luggage/load compartment, Heat-insulating glazing. Rcedsy Dnm Tepfx Ac Tsf Interior mirror with automatic dimming, Tinted rear side and rear windows.

Condition: used, Planer head for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: RVZ Z2 - Cutting circle (ø): 122 mm - Bore: 40 mm - Marking: MEC - Length: 100 mm Redpjzv Izxefx Ac Tecf - Material: steel

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Working/planing width: 520 mm - Max. thickness planer clearance height: 240 mm - Total length of the planing tables: 2,200 mm - 4-blade TERSA planing spindle - Planing spindle diameter: 120 mm - Planing fence swivels up to 45° - Jointly foldable planing tables - Solid cast-iron planing tables Rcodpezwqdxofx Ac Tsf - Feed speed: up to approx. 17 m/min - Thickness planer table with height adjustment - Integrated exhaust hood

Condition: used, functionality: fully functional, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 120 mm, fuel type: electric, mast type: duplex, construction height: 2,600 mm, fork carriage width: 1,100 mm, empty load weight: 4,305 kg, drive type: Elektro, construction width: 1,210 mm, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Rodpowqtxzjfx Ac Tscf Mast type: Duplex Technical condition: New Front tyre type: Solid rubber Front tyre size: 28X9-15 Rear tyre type: Solid rubber Rear tyre size: 200/50-10 Battery voltage: 80V 3rd valve, 4th valve, overhead guard, load backrest, CE certificate, Image may be for illustrative purposes only Comfort seat Fork length: 1150 mm

Condition: used, functionality: fully functional, machine/vehicle number: 105000002, Year of construction: 2001, operating hours: 2,600 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork length: 1,600 mm, empty load weight: 8,800 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Chassis number: 105000002 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Normal Description: Steinbock 557 side loader, year of manufacture 2001, only 2,600 operating hours. Robust and reliable piece of equipment, ideally suited for use in industrial environments, warehouses, and timber handling. Its solid construction, straightforward technology, and high load capacity make this side loader a long-lasting asset for everyday operations. Used condition with age-related wear, technically ready for use. Rcedpfoy Ety Ujx Ac Tef Export price: €7,400.00 Inspection and test run available by appointment. Errors and prior sale excepted.

Condition: used, mileage: 169,000 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, total width: 2,050 mm, total height: 2,500 mm, loading space length: 3,500 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant. Attention!!! Preferential sale to commercial customers only. Internal ID Number: [ 3265 ] ----Optional extras available: * 12–64 months warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing available with or without down payment * Tow bar can be retrofitted on request! * Spring special: On request and for an additional €999, towing capacity can be increased to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle highlights: * 19% VAT deductible * Regular maintenance * German vehicle * Immediately ready for use * Euro 6 emission standard * 1 previous owner * Accident-free * Maxi version—high roof & long wheelbase * Air conditioning * Cruise control * Towing capacity: 2,500 kg Rcodpfxjzurcqj Ac Tef * Reversing camera Special equipment: City package, reinforced rear suspension, speed limiter, rear wing doors (270-degree opening angle), seat box covers, 12V socket in load/passenger compartment Further equipment: Driver airbag, wide-angle exterior mirrors, load compartment floor, on-board computer, driver assistance system: Emergency braking assistant, solid rear doors without glazing, body/chassis: standard high roof panel van, padded headrests, 90-litre fuel tank, load compartment partition, engine: 2.0L – 96 kW BlueHDi FAP CAT, radio pre-installation, 4 speakers, wheelbase 4035 mm, full-size spare wheel, Euro 6 low-emission standard, rear disc brakes, right-hand side loading/passenger compartment sliding door, SCR system (AdBlue technology), side protection strips, fabric seat upholstery, cab seats: dual passenger seat (incl. automatic safety belt), cab seats: driver’s seat with armrest, height-adjustable, driver’s seat with lumbar support, start/stop system, Gross vehicle weight rating 3.50 t ----Interested in leasing or financing? We offer attractive terms – also available with no down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Business hours: Mon–Fri: 9:00 am–6:00 pm Sat: 9:00 am–2:00 pm ----Notice: All information online is non-binding and serves only as a general description of the vehicle. Errors, typing mistakes, and prior sale reserved. The binding condition of the vehicle is determined exclusively by the purchase contract on site or by written confirmation. Vehicles with a mileage exceeding 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Rcedpfx Ajy D E Tdjc Tef

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Rcodpfxovvi N Ij Ac Tjf