Used Small Unicorn for sale (4,280)

Condition: used, L x W x H: 130 cm x 32 cm x 70 cm, Adjustable 80 cm Gjdju Atipjpfx Ag Rebg

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds Gjdpfx Ageflt Edo Robg - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel Gbsdpfx Agsgxuhme Rjg max. diameter 80 mm x 80 mm

Condition: reconditioned (used), > Small moulding machine with the format 350x250x90. > For skinning and blistering of small batches. > As a sample machine for every company. > Optionally also with upper punch. > Further details on request. > Completely overhauled and newly painted Gbodpfx Asfugz Ueg Reg

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Gbjdpfxjtvgqns Ag Rsg

Condition: good (used), Conveyor technology (roller carpet) with numerous small rollers - used - : Prices net per piece at the site! Manufacturer: unknown Type: unknown Year of manufacture: unknown Type 1 = 6 pieces 100.-€ element length: ca. 1,22m element width: ca. 91cm Frame height: approx. 9cm single user = 5 pieces 100.-€ element width: ca. 91cm frame height: ca. 9cm Inner dimension: 1,92m Gsdpfxokn D A Ue Ag Robg curve = 1 piece 100.-€ element width: ca. 91cm frame height: ca. 9cm Inner dimension: 1,92m Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. Gjdeiiciqspfx Ag Rjbg The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Godewqg Enepfx Ag Rsbg Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: new, Year of construction: 2023, functionality: fully functional, Type: Small roller conveyor , TAF Item no.: 100000587 Technical data: Conveyor width Conveyor width: 300 mm Overall width: 320 mm Conveyor length: 3,000 mm Total height / conveyor height: 80 mm (without supports) 655 - 1,030 mm (incl. supports) Roller pitch / centre distance: 22.5 mm Roller axle type: Spring axle, 6 mm Roller per axle: 1 piece Castor diameter: 20 mm Castor material: Plastic Castor colour: sky blue Cheek type: L-profile Cheeks material: galvanised steel Requirements for the conveyed goods Bottom of the conveyed goods: level and largely closed, e.g. KLT, beverage crates, cardboard boxes, tyres Gbodpfxjpag Tho Ag Rjg Max. weight: 50 kg/m Minimum length: 70 mm

Condition: used, LECO LM - 100 AT Small load and micro hardness tester Year of construction: 2010 Test force ranges from 0.001 - 2 kgf Manual or automatic turret with up to 4 objectives and 2 test diamonds simultaneously PC is included in the scope of delivery --> Software could not be tested as the graphics card is missing. You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping company for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved. Gsdpfx Agsrtn D Ie Rjbg

Condition: used, Small Hydraulic Portable Crane - Clarke Strong Arm Capacity Up to 500 kg Gjdpfx Agowhfvgs Robg

Year of construction: 2014, condition: new, functionality: fully functional, Biorock D10 small wastewater treatment plant for 10 PE, consisting of a plastic tank with a filter layer, aeration and sampling shaft, and a filter brush. Gbodpev Iv U Uofx Ag Rjg Maximum capacity: 10 PE Primary treatment: > 5,000 l Bioreactor: 3,000 l In mint condition, installed but not yet commissioned.

Condition: excellent (used), Capacity: 2.5 tons Gsdpfxow U Aurj Ag Rjbg Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Tools not included in delivery

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Gbodpfx Aspcqdwog Rjg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: new, Year of construction: 2023, Type: Small roller conveyor , TAF Item no.: 100000584 Technical data Gbodsnacl Repfx Ag Rog Conveying width: 300 mm Conveyor length: 1.500 mm Carrying rollers material: plastic Carrying rollers color: sky blue Cheeks type: U-profile Cheeks material: steel, galvanized

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Gbodsg H Tldspfx Ag Reg Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, color: orange, Year of construction: 2025, Applicable material: Concrete Empty weight: 8.500 kg Cargo space capacity: 30.000 l Warranty: 24 months Capacity: 30 m^3/h Aggregate bunker : 4 x 6 m3 or 2x12m3 Seperation Available Aggregate tranfer conveyor 650 mm x 2450mm Main Chassis Cement weighing bunker - 300 kg Water weighing bunker - 200 L(galvanized) Additive weighing bunker – 50 lt kg(galvanized) Compressed air installations - Pressus POLYGON P500 - Planetery mixer: 0,75/0,5m3(Brand:Polygon) 18,5 KW Ermaksan Gearbox. Gamak Engine Power Board and Control Panel Automation system - PLC(Siemens) + PC ,Printer, Touch Panel and Electric Components Water Pump 20 m3/Hour) Support Structure Tandem Axles, Tires and Hook for Easy Transport Handrails, Maintenance Platform, Ladders are Galvanised 800X13 500mm Concrete Discarhe Transfer Belt Conveyor for Transmixer with Special Scraper (4 Meters Height) Bolted Type Cement Silo(50 Tons)+Cement Screw(WAM)168*5000mm +Silo Equipments(WAM)(Silo Filter, Air Jets, Safety Valve,Level Indıcators max-min with alarm systems) (All WAM) Gedpfjx D Ddfsx Ag Rsbg PLANT DETAIL BRAND POLYGON MODEL POLYGON PAC30 CONCRETE PLANT PLANT MODEL CONCRETE PLANT WITH PLANETERY MIXER PLANT CAPACITY Fresh Concrete 30 m3/Hour AGGREGATE BUNKER CAPACİTY 4x6= 24 M³ CEMENT WEIGHT CAPACITY 300 kg WATER WEIGHT CAPACITY 150 kg MIXER CAPACITY 750-500 LT PLANETERY MIXER(P S1000) TOTAL ENGİNE POWER 65 Kw NUMBER OF MIXER ENGINES 18,5 kw GAMAK VOLTAGE 380V - 50 Hz METALLIC STRUCTURE/MAIN CHASSIS The main chassis has been designed according to field experience and so as to easier transportation, installation, maintenance, operation processes. Aggregate Bunker Weighing capacity : 24 m3 Aggregate Compartment : 4 x 6 m3 compartments, 1 evacuation doors per compartment Vibrator : 2 Pieces Kemp 200/3 Aggregate Feeding Belt Dimensions : 650 mm x 2450 mm Motor-Reductor : 3 kw Drive Drum : 10 mm rubber coated Bed Type : SNH Series Felt Cast Iron Bed with Lubrication Band Tape : TS 542 Norm 4 Ply, 4/2, Aggregate Weighing Bunker Weighing capacity : 1 m3 Load cell : 4 x 1000 kg Zemic Vibrator : 2 Piece Kemp 200/3 Cement Weighing Hopper Weighing capacity : 300 kg Load cell : 3 x 500 kg Zemic Pneumatic valve : Wam Bv1fs250nn Diameter: 250 Driver : Wam Acp13 Pneumatic Actuator Vibrator : 1 Piece Kemp 100/3 Water Weighing Hopper Weighing capacity : 200 lt Load cell : 3 x 500 kg ZEMIC Pneumatic valve : Bv1fs150nn – Diameter: 150 Driver : Acp13 Pneumatic Actuator Additive Weighing Hopper Weighing capacity : 20 lt Load cell : 1 x 100 kg ZEMIC Pneumatic valve : 1 ’’ TORK Pump : 0,37 kw Weighing System : 1 pcs chemical weighing system Piston Air Compressor It has a stop-start working system, driven by belt-pulley. It has a 3 phase electric motor. Flow : 200 lt/mn. Operating : 6-8 Bar MIXER TECHNICAL SPECIFICATION...

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), color: other, Year of construction: 2025, Equipment: cabin, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. Gbedpfx Ajxpg Abeg Rog What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Conveyor belt, belt conveyor, small-part conveyor belt GURA Year of manufacture: approx. 1992 Conveyor length: 2200 mm Usable length: 2170 mm Belt length: approx. 4700 mm Belt width: 220 mm Return roller diameter: 32 mm Return roller diameter under the belt: 50 mm Drive roller diameter: 80 mm Gbsdpfxsw E Nwvs Ag Rog Belt speed: approx. 20 meters/min. Overall height: approx. 1000 to 1100 mm Motor power: 0.18 kW Power supply: 400 Volt, 50 Hz - Driven by geared motor - Adjustable incline - Height-adjustable metal base frame - Rubber conveyor belt worn - Mobile on 4 fixed castors Overall dimensions L x W x H: 2200 x 550 x 1100 mm Weight: approx. 80 kg

Condition: new, Year of construction: 2023, Type: Small roller conveyor curve Curve 90° Item no.: 100000630 Technical data: Conveyor width Conveyor width: 300 mm Angle: 90° Total height / conveying height: 80 mm (without supports) Total height / conveying height: 655 - 1,030 mm (incl. supports) Inside curve radius: 800 mm External curve radius: 1,100 mm Roller pitch / centre distance, inside: 22.5 mm Roller pitch / centre distance, outside: 31 mm Roller axle type: external thread, M8 Idler per axle: 2 - 4 (depending on conveyor width) Idler diameter: 20 mm Idler roller material: Plastic Idler colour: sky blue Cheek type: rolled profile Gjdpfx Aepag Tpsg Rebg Cheeks material: galvanised steel Requirements for the conveyed goods Bottom of the conveyed goods: Flat and largely closed, e.g. KLT, beverage crates, cardboard boxes, tyres Max. weight: 50 kg Minimum length: 85 mm

Condition: new, color: orange, Year of construction: 2025, Applicable material: Concrete Empty weight: 8.500 kg Cargo space capacity: 30.000 l Capacity: 30 m^3/h Aggregate bunker : 4 x 6 m3 or 2x12m3 Seperation Available Aggregate tranfer conveyor 650 mm x 2450mm Main Chassis Cement weighing bunker - 300 kg Water weighing bunker - 200 L(galvanized) Additive weighing bunker – 50 lt kg(galvanized) Compressed air installations - Pressus POLYGON P500 - Planetery mixer: 0,75/0,5m3(Brand:Polygon) 18,5 KW Ermaksan Gearbox. Gamak Engine Power Board and Control Panel Automation system - PLC(Siemens) + PC ,Printer, Touch Panel and Electric Components Water Pump 20 m3/Hour) Support Structure Tandem Axles, Tires and Hook for Easy Transport Handrails, Maintenance Platform, Ladders are Galvanised 800X13 500mm Concrete Discarhe Transfer Belt Conveyor for Transmixer with Special Scraper (4 Meters Height) Bolted Type Cement Silo(50 Tons)+Cement Screw(WAM)168*5000mm +Silo Equipments(WAM)(Silo Filter, Air Jets, Safety Valve,Level Indıcators max-min with alarm systems) (All WAM) Gjdpex D A Sbefx Ag Rebg PLANT DETAIL BRAND POLYGON MODEL POLYGON PAC30 CONCRETE PLANT PLANT MODEL CONCRETE PLANT WITH PLANETERY MIXER PLANT CAPACITY Fresh Concrete 30 m3/Hour AGGREGATE BUNKER CAPACİTY 4x6= 24 M³ CEMENT WEIGHT CAPACITY 300 kg WATER WEIGHT CAPACITY 150 kg MIXER CAPACITY 750-500 LT PLANETERY MIXER(P S1000) TOTAL ENGİNE POWER 65 Kw NUMBER OF MIXER ENGINES 18,5 kw GAMAK VOLTAGE 380V - 50 Hz METALLIC STRUCTURE/MAIN CHASSIS The main chassis has been designed according to field experience and so as to easier transportation, installation, maintenance, operation processes. Aggregate Bunker Weighing capacity : 24 m3 Aggregate Compartment : 4 x 6 m3 compartments, 1 evacuation doors per compartment Vibrator : 2 Pieces Kemp 200/3 Aggregate Feeding Belt Dimensions : 650 mm x 2450 mm Motor-Reductor : 3 kw Drive Drum : 10 mm rubber coated Bed Type : SNH Series Felt Cast Iron Bed with Lubrication Band Tape : TS 542 Norm 4 Ply, 4/2, Aggregate Weighing Bunker Weighing capacity : 1 m3 Load cell : 4 x 1000 kg Zemic Vibrator : 2 Piece Kemp 200/3 Cement Weighing Hopper Weighing capacity : 300 kg Load cell : 3 x 500 kg Zemic Pneumatic valve : Wam Bv1fs250nn Diameter: 250 Driver : Wam Acp13 Pneumatic Actuator Vibrator : 1 Piece Kemp 100/3 Water Weighing Hopper Weighing capacity : 200 lt Load cell : 3 x 500 kg ZEMIC Pneumatic valve : Bv1fs150nn – Diameter: 150 Driver : Acp13 Pneumatic Actuator Additive Weighing Hopper Weighing capacity : 20 lt Load cell : 1 x 100 kg ZEMIC Pneumatic valve : 1 ’’ TORK Pump : 0,37 kw Weighing System : 1 pcs chemical weighing system Piston Air Compressor It has a stop-start working system, driven by belt-pulley. It has a 3 phase electric motor. Flow : 200 lt/mn. Operating : 6-8 Bar MIXER TECHNICAL SPECIFICATION Feature Value/Unit Capacity Loading...

Condition: used, Electric Load Lift – Pedestrian Stacker, Pallet Truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19153 Year of manufacture: 2011 Type No.: Rated capacity: 175 kg Lift travel: 1880 mm Lifting height: 2760 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Lifting aid outreach: 730 mm Chassis length: 970 mm Underride height: 90 mm Underride length: 485 mm Chassis configuration (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 1220 mm Overall width: 600 mm Construction height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 pcs lead-acid battery 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Infinitely adjustable handgrip height - Load mounting flange according to EXPRESSO standard 280 x 50 mm / 3 mounting holes M10 spaced 110-110 mm Fitted lifting aid: Pivoting jib arm Gbedpfx Aefr Izgsg Rjg Lifting aid load capacity: 60 kg Pivoting range: ±30° (lockable only at 0°) Jib arm length: 600 mm - Steplessly adjustable load eye, hole diameter 30 mm Total weight approx. 100 kg good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Gbedpfeflt Ebex Ag Rog Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg Gbjdpsflt Efjfx Ag Rjg good condition

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Godpfsflt Egox Ag Rsbg Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition