Used Small Format for sale (5,924)

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm Fsdpfx Ashfxkaocwopf W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: good (used), functionality: fully functional, For sale: ROWE RCS 4000 Plotter DIN A0 up to 914 mm Year: 2011 Description: ROWE Model RCS 4000 large-format plotter/scanner/copier. Specifications: Manufacturer: ROWE Model: RCS 4000 Device type: MFP Functions: Print / Scan / Copy * Printer * Printing technology: guided Type of printing technology: Laser/LED Color scale: monochrome Maximum format: A0 Number of colors: 1 Maximum resolution (X - monochrome): 600 dpi Maximum resolution (Y - monochrome): 600 dpi * Scanner * Scanner type: sheet-fed Scanner sensor type: CIS Maximum original size: A0 Maximum scan width: 914 mm Scan resolution (X): 600 dpi Scan resolution (Y): 600 dpi Enhanced scan resolution (X): 1200 dpi Enhanced scan resolution (Y): 1200 dpi Fpjdpowlhypefx Acwsf Send image via email: Yes * Copier * Minimum scaling value: 25% Maximum scaling value: 1000% Zoom increments: 1 Max. number of copies per cycle: 999 * Interfaces * Ethernet interface (RJ-45): Yes Web interface: Yes * System requirements * Windows support: Yes Linux support: Yes * Memory / Processor * Memory size: 1024 MB Hard disk capacity: 80 GB CPU frequency: 3000 MHz * Logistics * Weight: 284 kg Dimensions: 1375 x 1175 x 750 mm Rolls: 2 automatic rolls Total (L x W x H): 690 mm x 1370 mm x 1100 mm (X315) Condition: Used, good according to age. Last maintenance: at 22,000 meters. Maintenance interval: approx. every 10,000 meters. Current meter reading: 25,000 meters (no maintenance since last service) Ready for operation, powered on. IMPORTANT: Please note that, for logistical reasons, we are currently only selling within Europe. All purchases and transactions are restricted to customers located within this region. The buyer is responsible for dismantling, loading, and transport. "The seller excludes any warranty for the purchased item. The item is sold in its current condition, without any guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the item prior to purchase and are satisfied with its condition. The seller does not assume liability for any damages arising from the use of the item. Any claims by the buyer against the seller are excluded." As of: 07.04.2026 Price: €500 negotiable / plus VAT Prices are net, excluding VAT. For further questions or more information, feel free to contact me.

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_1, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Fpedpfeyu Uwxex Acwef Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: good (used), Year of construction: 2022, Component size: Length 1700 x Width 1050 x Height 1050 mm Printing process: The patented VFGF technology (Variable Fused Granulate Fabrication) is an advancement of pellet-based 3D printing with a variable nozzle opening. It prints in high resolution only where needed, such as on visible surfaces, and efficiently fills internal areas with thicker extrusions. In doing so, VFGF combines the advantages of FDM (Fused Deposition Modeling) for fine details and complex geometries with those of granulate printing (high deposition rates, material variety, reduced costs). Intelligent algorithms ensure the precise amount of material is placed exactly where it is required, even with complex shapes that involve overhangs or support structures. Areas of application: Suitable for prototypes, single parts, small series, and even higher production volumes. By melting the material in a specially developed screw extruder, high throughput rates are achieved, significantly reducing print times. This process is ideal for industries such as aerospace, mechanical engineering, and automotive manufacturing. Fodpfxsyyxlls Acwepf Advantages: This technology enables the production of components with unrestricted design complexity and high surface quality. Compared to filament-based 3D printing, it offers significantly reduced print times and material costs. As a result, economical large-format 3D printing in manufacturing is now possible for the first time.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 690 mm, total width: 600 mm, total height: 1,050 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 690 mm, space requirement width: 600 mm, Lebema Orion small circular knife machine stainless steel version, Knife reground and coated manual operation via rotary control Slice thickness adjustable from 3 - 25 mm Dimensions: 600 x 650 x 990 mm, WxDxH Bread dimensions max: 300 x 280 x 160 mm L x D x H DGUV V3 tested Machine mobile with lock Connection 400V, 16A-CEE plug Used machine cleaned and checked Fsdpfx Acsiitqlswopf Visit our large bakery machine park!

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm Fpsdpfx Aex Rqrlocwsf - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm Fsdpfx Acsx D D Hmowjpf • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: excellent (used), CATALOGUE NUMBER 7900 Technical data: - Inlet width: 350mm - Inlet height: 160mm - Shaft width: 340mm - Shaft diameter: 250mm - Number of knives: 2 rows of 5 pieces each Fjdpfx Acjymff Rswjpf - Sieve dimensions: 10x10mm - Lower toothed feed roller - Lower roller motor: approx. 1.5kW - Upper toothed feed roller - Upper roller motor: approx. 1.5kW - Main motor: 30kW - Extraction connection diameter: 200mm - Machine dimensions (L/W/H): 1600x900x1000mm - Weight: 920kg ADVANTAGES – German-made – Autoreverse (adjustable) – Used shredder, in good condition Net price: 30,000 PLN Net price: 7,150 EUR based on an exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive Fpsdpexrby Hsfx Acwef - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm. Fpjdpfogz H Dhjx Acwof

Condition: used, Work spindles: Number of shafts: Typically 3 tool shafts. Spindle length: 320 mm. Spindle diameter: 50 mm. Maximum tool diameter: Up to 220 mm. Fjdpfx Asyzrdwscwjpf

Condition: excellent (used), Year of construction: 2006, operating hours: 1,296 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,083 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (May 2023) with only 1296 laser hours 2400 dpi Z-speed Total imaged printing plates: 258,861 sheets Minimum size: 483 x 394 mm Fsdpeyta N Djfx Acwopf Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy VPS 3 workflow with dongle, Printconsole 5.1 and Dell PowerEdge 7330

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,083 mm, KODAK Magnus VLF large-format thermal platesetter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2,615 laser hours 2400 dpi Z-speed Total imaged printing plates: 395,443 units Minimum size: 483 x 394 mm Fodpfxsytawnj Acwspf Maximum size: 1600 x 2083 mm Material flow from left to right with Print Console enabled for all RIP software, server Dell PowerEdge T330

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Fsdpfoxqaa Ajx Acwopf Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Item: D-10655-Small Open cheese vat Open Type Cheese vat, for small home-farm production Capacity 100 L, Stainless Steel with agitation and control unit Fpedpsh Hrdyjfx Acwjf Vat dimension: 800 x 600 x 300 mm Stainless Steel frame Complet with Pump

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster Fjdpfx Acsx Ifcmjwepf TOP machine Price on request

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, number of ink cartridges: 4, number of print heads: 2, paper width (max.): 736 mm, 1.5 years old, lightly used, 50% of the original price. Roland TrueVis SG3-300 Print & Cut Large-Format Printer + Plotter Cutter – Excellent Condition – Lightly Used – Ideal for Stickers, Vinyls & Signmaking For sale is a Roland TrueVis SG3-300 large-format inkjet printer with integrated cutter plotter (Print & Cut System). Fpodjx Dnrgepfx Acwjf This device is perfect for professional production of stickers, labels, vinyl lettering, signs, textile printing, advertising technology, magnets, and many other print and plotter products in a single operation. The sale is due exclusively to a change in our product portfolio, not for technical reasons. Condition and Usage: - Very well maintained and in perfect technical condition - Lightly used – approx. 2 days per week, 2–3 hours runtime each - Regularly serviced and carefully handled - Maintenance contract valid until 31/12/2025 - Last service in October 2025 - The printer will continue to be operated weekly until sale to keep all systems functional Original price: €12,400. Invoice from 10/2024 available. Inspection, test print, and trial run can be arranged by appointment. Optionally available: Doming machine for producing 3D domed products such as magnets, stickers, labels, and emblems Additional accessories on request If you have any questions, feel free to contact me anytime. I am happy to provide further information and details.

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt Fpsdpfx Acewqg Enewjf - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Fpjdpjflt Egefx Acwjf Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Fodpfxeflt Ede Acwopf Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Fpjdpopcqdwofx Acwof Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Fjdpfx Acjflt Ebewopf Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Fodpfoywgk Djx Acwspf Max. sheet thickness: 15 mm Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small parts conveyor presumably RÖWE type 2050 x120 Year of manufacture: approx. 2010 Usable length: 2050 mm Belt length: approx. 4450 mm Belt width: 120 mm Frame profile height: 50 mm Return roller diameter: 52 mm Belt speed: 3.3 m/min. Motor output: 0.09 kW Fjdpfoylma Tex Acwspf Power supply: 400 Volt, 50 Hz - Driven by WEG geared motor - Belt body made of aluminium system profile with 10 mm profile slot, suitable for standard T-slot nuts Overall dimensions L x W x H: 2100 x 240 x 220 mm Weight: 37 kg in good condition

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small goods conveyor belt MK MASCHINENBAU Type 2400 x 85 Year of manufacture: approx. 2010 Usable length: 2400 mm Belt length: approx. 5100 mm Belt width: 85 mm Frame profile height: 50 mm Return roller diameter: 30 mm Belt speed: 6.5 m/min. Motor power: 0.18 kW Main connection: 400 Volt, 50 Hz - Drive via ATB geared motor - Belt body made from aluminium system profile with approx. 7 mm profile groove, suitable for standard T-nuts Overall dimensions L x W x H: 2420 x 180 x 300 mm Weight: 21 kg Fpedpfx Acsxtq D Rswof Good condition