Used Slitting Mashine for sale (244)

Year of construction: 1989, condition: ready for operation (used), A roll slitting machine Euromac is available. Materials: monolayer plastic, laminates, extrusion film, paper, metal foil, and aluminium laminates. Working speed: 300m/min, film width range: 500mm-1300mm, max. roll diameter: 920mm, roll core diameter: 76mm/152mm (3 inch/6 inch). The system can only unwind and trim. Without 100% web inspection. Includes Sick safety device. Documentation available. An on-site inspection is possible. Fjdpfew R Dhfjx Afnepc

Year of construction: 1994, condition: used, For processing of plain paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Fpodpfoyb Shhsx Afnec Formats: A3, A4 Maximum web width: 500 mm Minimum web width: 250 mm Paper grammage: 60 g/m² - 170 g/m² Maximum stack height on delivery belt: 100 mm Control: Siemens Simatic S5

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Fedpfxsxl R A Rj Afnspc Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Fodpfjgryk Njx Afnspc

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Fpsdpfo A Dimsx Afnjc

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04090810, Equipment: type plate available, AutoTurret ABG Vectra+ slitter Ashe. Width 410mm. Slitting 25, 41, 76mm. Automatic roll ejection. Glueless. Good condition. Magnetic cylinders: 96, 99, 102, 104, 108, 110, 111, 114, 116, 120, 124, 130, 131, 135, 136, 138, 140, 141, 144, 147, 151, 154, 156, 167, 168, 180, 185 Fpjdpfx Afswyvf Asnec

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Fpedpfx Aeipvhnefnoc

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. Fpedpoyghn Iofx Afnoc It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant • Application: film, paper and packaging materials

Condition: new, Year of construction: 2025, Delivery every Monday, Tuesday - RELIABLE! The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Heavy duty manual guillotine shears for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE approved quality Declaration of conformity stable and robust construction for steel plates up to 1.2mm open design suitable for endless cuts large cast work table Working length 2050mm Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Fpjdpfx Afscudlaenoc Price: 4.650 euros Delivery date: every week We are looking forward to your contact!

Condition: used, Year of construction: 1996, Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Maximum speed: 300 m/min Web guiding system: Yes Knife type: Razor & rotary blades Trim exhauster: Included Fpedpfx Ajx Ezwzsfnsc

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: Fpodpfx Afexx Tbconec • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: used, Year of construction: 2016, Technical data Film width: 1350 mm Fpedpfxexxm E Ue Afnjc Unwinder: Shaftless, servo-driven, Ø1000 mm Rewinder diameter: Ø610 mm Speed: up to 400 m/min Slitting system: Rotary & razor blades Additional features: Banana roller, trim exhauster

Condition: used, Year of construction: 2018, Technical data: Maximum material width: 1350 mm Web guiding system: Optical sensor (control by print mark) Slitting technology: Fpodpfx Aexxmuvofnsc • 8 rotary knives • 8 razor blades Edge trim extraction: fully functional Knife/blade adjustment: Manual

Condition: used, Year of construction: 2008, Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft, center-driven Maximum Rewinder Roll Diameter: 650 mm Fjdpfx Aoxxmr Usfnjpc Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, paper, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup • Modular design for easy maintenance and access

Condition: like new (used), Year of construction: 2015, functionality: fully functional, mandrel diameter: 76 mm, product width (max.): 1,600 mm, Eruomac rewinder / slitter TB 6.10M Year of construction 2015 Unwinding Roll width 1600 mm Roll diameter 400 - 1200 mm Equipped with web edge control Rewind Roll width 1600 mm Roll diameter 350 - 1000 mm Fjdpetyxu Ejfx Afnopc

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Fodpfofwfpbex Afnepc Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, REWINDING AND CUTTING MACHINE WITH LONGITUDINAL AND CROSS CUTTING, MAX. REEL LENGTH: 160 CM, DIAMETER: 50 CM Fpsdpjxw T S Ejfx Afnsc

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Fpjdewvv Hfspfx Afnoc Rewind shafts: Dual rewinding shafts Max mechanical speed: 400 m/min AC Servo motor with tension control Web guiding Material types BOPP, PET, PE, laminated film, foil, paper

Year of construction: 2012, condition: used, Web width: 520 mm Voltage: 400 V + IV + PE Current: 20A Control voltage: 24 V DC Fodpfjxl Trujx Afnepc Air pressure: 6 bar

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: 220095, Knife number 4/5 Fedpfewrx E Asx Afnspc Min slitting width(mm) 125 Min crease width(mm) 60 Min Paper Length (mm) 320

Condition: ready for operation (used), Year of construction: 1997, 1997, speed: 500 m/min, roll dimension: 450 – 1550 mm, Fodpfx Ajxwp Uvjfnopc

Condition: used, Year of construction: 1975, functionality: fully functional, Paper Cutting and Rewinding Machine – Goebel Robust industrial equipment, manufactured in Germany, specifically designed for slitting and rewinding paper rolls. Delivers high precision in processing large reels and is ideal for preparing material for printing houses, packaging production, and other applications in the paper industry. Its solid construction and proven reliability ensure successful operation even after decades of use. Fsdpfx Afoxcxluenepc

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Fjdpfxjw Nvkij Afnepc

Condition: used, Year of construction: 2001, Offset 2 color Heidelberg PM GTO52-2 Year: 2001 Number of impressions (mio): 7 Machine control - Press Control Feeder - Single sheet feeder - Anti static device: Simco Printing units - Number of printing unit(s): 2 - Straight machine - Laser slit ink fountains - Standard plate clamps - Dampening system: Direct continuous dampening Delivery - Standard delivery Fjdpjyimwwjfx Afnjpc - Plus version - Powder spray - Compressed air compressor, excluded Max. output (s/h): 8.000 Max. sheet size (mm): 360 x 520

Condition: used, Year of construction: 2024, Cloth cutter Fpsdpfxovqbhle Afnsc Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.