Used Sleeve Sealing Machine for sale (84,669)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Njdsvz H N Nepfx Aa Eelk Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: as good as new (ex-display), JEUX 6510-S3+ JEUX AI-118 Nodpsgq Ur Rsfx Aa Eslk

Condition: like new (used), Lanico rv 248 with cover magazine. Price is without two-hand control. But also available with two-hand control. Without it it is €8500 with €13500 The machine is set up for diameter 99. It was completely dismantled and rebuilt. Completely renovated. Photos available. Or rather, it is not quite finished yet. On request it can be finished according to your requirements. Nlsdpfx Aaevzlfcs Eok Are you looking for other machines for your production? Contact us.

Condition: like new (used), Year of construction: 2020, Technical Specifications Number of bags: 6 Total weight when filled (kg): 180 Empty weight (kg): 170 Nljdpsv S D Taefx Aa Eok Power: 0.18 kW - 400V / 50 Hz Diameter (mm): 1100

Condition: used, Year of construction: 2012, overall dimensions 710x400x400 mm; power supply 230V, 50 Hz, 13 A; Nodpfx Aaewk Ddhs Eelk compressed air supply 5.5 bar; performance 6 cycles/min; for paper trays; weight 57 kg.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. Nlodpfjvubapex Aa Eok The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Tray Sealing Machine Model: ILPRA FOODPACK 400 N Njdowxlqlopfx Aa Eolk (sold together with 5,000 trays and the corresponding sealing film) Machine for cutting and heat-sealing with metallized film, compatible with pre-formed trays made of plastic, aluminium, and/or laminated cardboard. Tray dimensions: max. 280 x 32 h mm (in a single row). Mechanical operating speed: approximately 400 cycles/hour, depending on the type of material used and the characteristics of the product to be packed. Operation with vacuum and inert gas injection at a speed dependent on the vacuum level (4 cycles per minute). OPERATION AND DESCRIPTION: The FOODPACK 400N is a practical, robustly constructed machine. The conveyor movement and the unwind–rewind system are mechanically driven, and the sealing plate is pneumatically operated. The machine is controlled by a programmable logic controller (PLC). The construction of the FOODPACK 400N considers the special humidity conditions in the operating area. All parts that come into contact with the product, such as the work surface and housing, are made of stainless steel (S/S). Switchover to another tray format takes approximately 5 minutes. MACHINE SECTIONS: Tray loading section: The loader consists of guides for the trays (the guides are designed to correctly position the filled trays). After placing the tray in place, the operator advances it into the sealing area by pressing a lever. (A presence sensor permits successive operations only if the tray is correctly positioned.) After the heat-sealing operation, the operator must return the tray holder to the loading position, remove the sealed tray, and load the next tray for subsequent sealing. Film unwinding and rewinding group: This group automatically positions the required length of sealing film—drawn from the reel—under the sealing and cutting unit, and rewinds the scrap. This group can be fitted with a date coding device for printing manufacturing/expiry dates. Optionally, a centering device allows for accurate alignment of the printed image in the centre of the metallized film covering the tray. Sealing and cutting section: In this group, the film is cut and sealed onto the tray (the cut matches the exact shape of the tray). Once the tray is positioned in the sealing area, the operator presses the START button to carry out the sealing and cutting operation. Both the upper and lower dies are manufactured according to the user-selected tray characteristics, and require a high degree of customization. The sealing plate is electronically timed, and each operation requires individual temperature adjustment. The section is equipped with a quick-change die system: releasing or securing the upper die can be done simply by turning a selector key on the control panel. Control panel: Equipped with a temperature controller for sealing temperature adjustment, a timer for sealing time, and a keypad with display for controlling machine functions, as well as START and EMERGENCY STOP buttons, main switch, and quick die-change selector. Section sequence: - Stainless steel (S/S) base. - Manual loading/unloading station. - Automatic film unwinding/rewinding system. - Sealing/cutting station. - Control panel.

Condition: like new (used), Computer-controlled, Dry-head, Lockstitch Sleeve Setting Machine with Multi-programming Device DP-2100 Perfect condition Warranty & Delivery Component: complete delivery machine The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. WORLDWIDE DELIVERY ! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Njdpfjt Ecvvjx Aa Eolk

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: MZsmcs01, type of input current: three-phase, Equipment: CE marking, This machine can be used for sealing round cans, such as aluminum cans, easy to pull cans, iron cans, plastic cans, paper cans, etc. Njdjx Ancijpfx Aa Eslk

Condition: excellent (used), functionality: fully functional, The Ishida Multihead Weigher is a high-speed, precision weighing machine designed to maximize packing efficiency by achieving the target weight with minimal product giveaway. It is an industry standard for maximizing yield in packaging operations. Precision & Capacity High Weighing Capacity: Features a dual capacity, capable of 4,000 g-2,000 g per head or 8,000 g - 4,000 g per head. Njdpsxxk Tijfx Aa Ejlk Ultra-Low Giveaway: Offers extremely fine precision with a Minimum graduation of 0.5 g / 1.0 g, which minimizes product waste and maximizes profit margin. Flexible Weighing Range: Supports a broad Weighing range of 105 g - 4,000 g / 375 - 8,000 g. Operational Benefits High-Speed Operation: As a multihead weigher, it operates at extremely fast rates by calculating the best combination of weights from multiple hoppers simultaneously. Robust Construction: The "SS(WP)" designation and appearance suggest a stainless steel, washdown-protected (WP) design, ensuring durability and simplified cleaning in a food processing environment. Complex Combination: Uses multiple weighing heads (indicated by the "214W" in the model name, typically 14 heads) to achieve highly accurate weights rapidly.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Fb001, warranty duration: 12 months, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, type of input current: three-phase, overall weight: 100 kg, power of the servo motor: 1 W, film width: 38 mm, compressed air connection: 0.25 bar, input voltage: 220 V, nominal power: 0.5 kW (0.68 HP), heating capacity: 0.8 kW (1.09 HP), Equipment: CE marking, Performance and features: 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. 6) Can add nitrogen function according to clients requirement. Nlodpfxjxmwkqj Aa Eek Application: It can be widely used in bag-in-box filling applications for such liquid materials as wine, edible oil, fruit juice, additives, milk, syrup, alcoholic beverages and concentrated seasonings.suitable for all kinds of bags and caps.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Nedpfx Aasxu Agmj Eelk

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: MzBp001, overall weight: 1,500 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,900 mm, power: 1.8 kW (2.45 HP), fuel type: gas, fuel consumption per hour: 20 l/h, operating pressure: 1 bar, pressure (max.): 0.6 bar, type of cooling: air, Equipment: CE marking, Automatic bottle cartoning machine is suitable for pharmaceuticals, food, cosmetics, commodities etc.It can open box, fill products into box, then close box with tuck-in or hot-melt sealing. The machine is equipped with a series of sensors and automatic protective devices to assure the machine runs safely and effectively. It can connect with the Blister Machine, Pillow Packaging Machine, Shrink-Wrapper, etc., to form a Packaging Line. It is the best choice for mass production. Nljdpexu Adxjfx Aa Eok

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZWP01, Equipment: CE marking, Automatic shrink sleeve labeling machine, this series of equipment is a fully automatic intelligent packaging line that integrates bottle feeding, bottle sorting, labeling, and shrink label functions. The design spirit of this equipment is true high speed, precise positioning, streamlined manpower, and perfect packaging. It is suitable for beverage and health food factories and has the functions of beauty, easy cleaning, and maintenance. Njdpfx Aaoxum Tqo Eslk The new steam shrinkage tunnel greatly improves the thermal shrinkage efficiency. It is easy to adjust and maintain for different and irregular bottle shapes such as round bottles, square bottles, and flat bottles, with smooth shrinkage. The steam spraying method adopts a separate steam drum design, and the pipeline is smooth and does not occupy space. The spraying outlet is divided into three sections on each side, and the height, front and back, and gas output of each section can be adjusted separately to achieve the most perfect shrinkage effect.

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3 Nedpfx Ajwhkhhja Ejlk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 3,800 kg, Machine for filling and closing packages Brand Waldner Model Sleever Nljdpevzw Hxjfx Aa Eok Efficiency 3600 containers/h Power 25kW / 36A Year of production 2015

Condition: good (used), Year of construction: 2010, Model Sleevematic M1 / Shrinkmat 4000 Performance 22,000 b/h Equipment Sleeve label full sleeve Year 2010 Delivery promptly Batch Standard Direction R-L Output range max. 27,000 bottles/h Bottle infeed 2 infeed worms opposite Labeling station Cutting unit S Film expanding mandrel Nedjucvdgjpfx Aa Eslk Film cutting unit with several servo-controlled cutters Sleeve length infinitely adjustable Electronic cutting mark control Reel holding device for 2 reels - manual splicing Machine safety Full guard designed with lift doors Voltage 415 V Frequency 50 Hz Control unit Siemens S7 300 including Steamtunnel Shrinkmat 4000 Dryer x 2 (year 2016)

Year of construction: 2014, condition: excellent (used), Tray sealer VC999 TS 500, Connection 400V, 4kW, year of construction 2014, with operating instructions, Tool for 4 bowls 187x137mm, incl. almost complete cardboard PP bowls black 187x137x25mm, Nlsdpfx Aslcbccoa Ejk Dimensions machine LxWxH approx. 120x85x166cm, weight approx. 432kg, Machine used, in very good condition, service-maintained, fully functional

Condition: used, functionality: fully functional, Mecapack designed the O² 2500 traysealer to offer efficient packaging solutions, particularly for medium- and high-speed production. With its three available versions, this machine adapts perfectly to the specific needs of industries. It stands out for its easily interchangeable onboard tooling, allowing for effortless handling of different packaging processes. Furthermore, the O² 2500's exceptional ergonomics simplify its use, while its design facilitates thorough cleaning. Furthermore, its FLEX configuration includes an integrated tooling storage, ensuring quick and smooth changeovers for different tray sizes. Its compatibility with the O² 1500 models adds to its versatility, making this machine ideal for various production environments. The pneumatic sealing station, equipped with a connecting rod and mechanical locking, ensures reliable and precise seals. By integrating the O² 2500 into your production line, you'll benefit from a robust, ergonomic, and adaptable machine. Furthermore, this solution improves overall efficiency while maintaining high quality standards for food packaging. Benefits: Benefits Automatic tray sealer Ergonomics and complete cleanability Njdeu Ia Uvopfx Aa Eolk FLEX configuration with tool storage Compatible with O² 1500 tools Precise and reliable pneumatic sealing Technical specifications: Manufacturer: Mecapack Model: O² 2500 MF Voltage: 400 V, 3-phase; N + T Power: 10 kW Speed: 14 cpm Energy: Electric: 6 to 25 kW, Air: 15 m3 at 6 bar, Water: 100 L/h (can be removed with the integrated chiller option). Tray capacitive (depending on the number of exposures) 7aRsquMN

Condition: like new (used), Hello. Nlodpfxeqt Azrs Aa Eok Twistoff machine. This machine was completely overhauled in 2021. Wear parts, bearings, bushings, motors, electronics etc. Everything renewed. Magnetic elevator new. The customer unfortunately had to stop production. Please contact me if you have any questions.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Nodox D U Arspfx Aa Eelk

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Nedpfx Aajxftqde Eelk Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED Nljdeirfpgopfx Aa Eek WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm Nlsdpfx Aaex D Tbmo Eok 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Nsdpfx Aasxxb Rre Eolk Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.