Used Peddinghaus Peddy for sale (145)

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Hodpfxjhx Ekpe Ag Usng Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, round bar steel 25 mm square edge steel 22 mm L-beam 70 x 7 mm cutting capacity 100 x 10 mm plate thickness 10 mm total power requirement 1,3 kW Hnodjhwaufopfx Ag Usg weight of the machine ca. 0,6 t dimensions of the machine ca. 1,1 x 0,65 x 1,5 m

Condition: used, machine/vehicle number: PA 1107, flat steel capacity: 80 x 10 mm electrical connection: 380 V, 1,3 kW space needed: 1000 x 650 x 1480 mm weight: 400 kg Hodpfx Aoby Dq Rog Uong

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Hedevw Dvlspfx Ag Ueng Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1976, round bar steel 28 mm Hsdpfxswm Rmne Ag Uong square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Hnedewfdbpepfx Ag Usg Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: used, Punch Tonnage Capacity: 75 to 80 tons Hnodpfxjx Ruvus Ag Usg Shear Tonnage Capacity: Up to 250 tons, Maximum Angle Size: 6 inches x 6 inches x 1/2 inch (or 152 mm x 152 mm x 16 mm) Minimum Angle Size: 1.5 inches x 1.5 inches x 1/8 inch (or 38 mm x 38 mm x 3 mm) Max Flat Bar (Shear & Punch): 6 inches x 1/2 inch (or 152 mm x 16 mm) Max Hole Size: 1-1/4 inches (32 mm)

Condition: used, Year of construction: 1999, pressure 30 t Hnedpfx Agovanvzo Usg plate thickness 800 mm keins weight of the machine ca. 1,3 t

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm Hedjx Symnopfx Ag Uong at 45°: 65 x 8 mm Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, profile shear, punch, punching machine -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 Hnjdpfx Agex Srlps Ueg -Dimensions: 1230/680/H640 mm -Weight: 419 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 18,300 mm, feed length Y-axis: 1,000 mm, total length: 20,500 mm, drilling capacity: 50 mm, total height: 2,560 mm, total width: 3,500 mm, quill stroke: 330 mm, workpiece weight (max.): 1,088 kg, table width: 1,000 mm, table length: 18,300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Beam Drilling Line Machine Type: Single Spindle CNC Beam Drilling Line Control: Siemens Sinumerik Year: 2005 Condition: Good. Can be viewed running Includes 60ft Table Technical Specification Max Beam Size: 60ft x 40" (18.3m x 1000mm) Max Beam Weight: 730lbs/ft (1088kg/m) Min Drill Diameter: 1/4" (6.5mm) Max Drill Diameter: 2" (50mm) Max Thickness: Up to 10" (250mm) Max Speed X-axis: 120 ft/min (37m/min.) Max Speed Y-axis: 120 ft/min (37m/min.) Spindle Power: 13 3/4hp (10KW) Drilling Feed Rate: 2" – 10" per min (50-254mm/min) infinitely variable Spindle Stroke: 13" (330mm) max Total power: 20 HP (14.9 KW) Power Supply: 400V, 3-ph, 50 Hz Average Output: 200 to 400 holes per hour depending on the profile drilled Approx Floor Space Required: 20.5 x 3.5m Hnodpfx Asu Nyg Usg Uog Machine Height: 2.56m

Condition: used, Profile shear for steel with notching unit Hedpjw Ip D Hofx Ag Ueng Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2004, General Specifications Maximum Plate Thickness: Up to 32 mm. Maximum Plate Width: 1828.8 mm (72 inches). Minimum Plate Width: 152 mm (6 inches). Punching Capabilities Hjdpfsx Ruvnox Ag Ujng Punch Capacity (Tonnage): 160 to 177 metric tons. Maximum Punch Hole Size: Up to 45 mm (1.75 inches) in diameter. Maximum Material Thickness for Punching: 32 mm (1.25 inches). Additional Features Hypertherm HT2000

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A Hjdpfx Ageryaqye Usng voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Hedpfsx Iicwjx Ag Usng Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Includes side stop and various tools

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 Hnodpsk D Nt Dsfx Ag Ueg -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Hodpfxex Tq Eqs Ag Ueng

Condition: good (used), functionality: fully functional, Year of construction: 2010, PEDDINGHAUS FDB1500/ 3C. YEAR OF MANUFACTURE 2010. 1500mm CAPACITY X 6000mm. PLASMA / OXY FUEL / DRILLING. HYPERTHERM HPR 260 SOURCE. Hnedsx Ruu Djpfx Ag Uog Peddinghaus FDB 1500 plate processing machine for drilling and flame cutting. CNC control Siemens Sinumerik 810 Machining dimensions: machining width from 80 to 1500 mm, sheet thickness from 6 - 50 mm, material length as a base up to 6000 mm, (the length is very easy to extend because of the roller measuring system). Drill diameter: min. ø 8, up to max. ø 40 mm suitable for HSS coolant channel drill (cooling by the drill spindle),

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hsdpfx Agohxzmcs Usng +++++

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm Hnodpfx Agjddfh Es Uog -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hjdpfx Agjx Tq Ekj Ujng Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: good (used), functionality: fully functional, Year of construction: 2008, Peddinghaus BDL 1250/9D Meba 1270 DGP CNC Drilling / Sawing Line - Year 2008. 9 spindles. Etching of beam. Carbide Drilling Hnsdpfox Ruuwjx Ag Uog Hard stamping unit. Measuring Head. In-Feed Cross Transfers. Out-Feed Cross Transfers. 1250mm Capacity.

Condition: used, Year of construction: 1999, hydraulic ja 100 t weight of the machine ca. 2,9 t Hnsdpfx Aox U A Tvsg Ueg

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise Hsdpjkvrpwofx Ag Uong -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: used, Year of construction: 1966, 5 Hedpfx Agsx U A Nke Usng weight 5 t .