Used Size Press for sale (28,691)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. Rjdpfxezuzw Ds Ac Tocf The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm Rcedpfx Aozuzwksc Tjf - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: repair required (used), Year of construction: 2019, pressing force: 220 t, overall weight: 12,620 kg, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Rcodpszuw Ewefx Ac Tef Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Redpfx Aszqr Niec Tecf Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Rsdpfeztvwiox Ac Tjcf Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control Redpfxjxbcudo Ac Tscf * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Accessories: Segmented AMADA tools, new Lateral safety devices Condition: Rodoznl U Tepfx Ac Tjcf The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information Redpfeztxn Rex Ac Tecf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, HSM VK 4812P channel baling press, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film Rcsdpfx Acezwnclj Tsf Note: The press has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Rated pressing force: 1,000 t Rcodpfx Aozxhzwoc Tsf Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW Rcsdpfx Aotndu Uec Tsf CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, HSM baling press, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Rjdpfx Acjzt N Afo Tscf Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Rodpozifpgefx Ac Tecf

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Rjdpfx Aszt H Uxoc Tecf Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Rodpfx Ajzvluvjc Tecf Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Rcodpfex Eg Upsx Ac Tof

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Rcjdpfxszv Rl Tj Ac Tof Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Maximum operating temperature 180 degrees Celsius Rjdpfxszuz Eus Ac Tscf Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today! Rjdpfx Aoyr I Husc Tocf

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min Redpfx Acowx R Rdj Tocf table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Rsdeyr I Hnspfx Ac Tecf The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: good (used), 1 x Schnitzel Press Rjdszq Eh Ejpfx Ac Tocf

Condition: used, Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Rjdpfx Aozuyltsc Tocf Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2023, Dear customers, For a quick and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, capture all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you further! Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube mount for briquetting press - Viewing window in the container Rodpfx Acokuz Tus Tocf Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must provide protection against hydraulic oil loss - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Rcsdpfxecmat Ue Ac Tsf Mechanical compression setting more photos an questions