Used Shredding for sale (850)

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control Gsdpfxoy Sam Ue Aafouf - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Gsdegmh H Topfx Aafouf

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood Gedpfx Aogbkkrjafjuf + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, Godpfx Aaezbizsfouf optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Gsdpfx Ash S H T Ueafsuf Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% Guedpfx Aowzarceafof - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Knives: multiple rotation, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput 1 - 5 hopper loads / h, Hydraulically operated slide, Screen size as required (10 - 40 mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (oven-dry). Gsdpfx Aaed Db N Isfouf Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idle • Removable suction chute • Speed 70 - 100 rpm for higher throughput • Cyclic control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal part: 1200 mm Ascending part: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, Gjdpfxjv I S T Ts Aafouf cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2025, power: 60 kW (81.58 HP), ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in one compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. Gedjv I Tuxopfx Aafsuf 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Year of construction: 2025, condition: new, ALL-IN-ONE Shredding System – WT3080 30 kW + PC3280R 22 kW + Big-Bag Station GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new, compact ALL-IN-ONE shredding and granulating system, combining a WT3080 single-shaft shredder with a hydraulic pusher, a PC3280R knife granulator, and a complete Big-Bag material collection station with a 5.5 kW transport fan and two Big-Bag filling positions. The system combines pre-shredding and fine granulation in a single, compact installation. The WT3080 is installed directly above the PC3280R granulator, allowing the pre-shredded material to be transferred directly into the granulator for the second stage of size reduction. SYSTEM CONFIGURATION: Gedpfjv I S U Rjx Aafouf 1. WT3080 – Single-Shaft Shredder with Hydraulic Pusher Main motor power: 30 kW Hydraulic motor: 2.2 kW Rotor length: 800 mm Rotor diameter: 300 mm Rotor speed: 83 rpm Rotor knives: 42 + 4 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,200 × 800 mm Weight: approx. 2,400 kg The hydraulic pusher automatically feeds material towards the cutting rotor, ensuring stable and efficient operation even with bulky and irregular waste. 2. PC3280R – Knife Granulator Motor power: 22 kW Rotor length: 800 mm Rotor diameter: 320 mm Cutting chamber: 834 × 414 mm V-type rotor: 3 × 2 rotating knives Fixed knives: 2 × 2 Standard screen perforation: 12 mm The PC3280R performs the second stage of the process, reducing the pre-shredded material to a significantly smaller and more uniform final fraction. 3. Complete Big-Bag Material Collection Station Transport fan: 5.5 kW Material transport system after the granulator Cyclone Complete piping system Big-Bag supporting structure Two Big-Bag filling positions The transport fan transfers the ground material from the granulator to the Big-Bag station, providing an efficient and convenient system for collecting the final regrind. APPLICATIONS: The ALL-IN-ONE system is suitable for processing various materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, plastic pipes and profiles, plastic crates and containers, injection molding waste, film waste, cable waste, paper and cardboard, wood waste, textile waste, Big-Bags, various industrial and production waste. The main advantage of the system is its compact design and complete two-stage shredding process – the WT3080 performs preliminary shredding, while the PC3280R granulator reduces the material to the required final fraction. The processed material is then pneumatically transported directly to the two-position Big-Bag station. This configuration follows the principle used in GrabTrade complete crushing lines: pre-shredder → knife granulator → transport fan → Big-Bag collection station. MAIN ADVANTAGES: Complete ALL-IN-ONE system Two-stage shredding and granulation Compact construction – reduced installation space Hydraulic material pusher 30 kW pre-shredder 22 kW knife granulator 5.5 kW pneumatic transport fan Two Big-Bag filling positions

Condition: new, Year of construction: 2026, functionality: fully functional, operation weight: 700 kg, construction height: 1,970 mm, construction width: 900 mm, noise level: 80 dB, number of blades: 3, rotor diameter: 250 mm, rotor width: 450 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start-up and end-piece sections In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside of the machine to reduce downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive, open rotor design guarantees reliable material intake and minimizes the risk of blockages. The compact granulators are designed for use in blow molding operations. They are suitable for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can easily be fed by hand or via a small conveyor belt. Low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife M version: The feed method featuring an elevated stator knife is more suitable for thicker-walled and more compact parts, such as injection-molded components, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness deliver high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, or plates. Control system and switch cabinet: The integrated control system and operator console not only comply with all current safety regulations, but can also be customized to address specific requirements. In addition, peripheral devices such as infeed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can start or stop the system automatically based on the operating status of upstream machinery. Standard configuration with blower, power consumption 0.37 kW, and 400-type cyclone Gedpfx Ajt Aagaeafouf Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 700 Feed opening (mm): 380 x 450 Feed opening option, M Version (mm): 295 x 450

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Gedpfjvnmmzox Aafouf Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: good (used), Year of construction: 2020, operating hours: 590 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Gusdpfx Aevnq Rkoafef Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems Guodjv Tdq Ijpfx Aafsf All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,750 mm, total width: 1,980 mm, total length: 2,460 mm, rotor diameter: 360 mm, rotor width: 1,000 mm, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45KW - Feed opening: approx. 1,030 x 1,235 mm - Hopper shape: inclined - Hopper volume: approx. 1.5 m² - Rotor diameter: 360 mm - Rotor design: standard - Cutting system: 25 concave blades + 25 square blades - Screen aperture: 25/30 mm - Control: electronic via PLC - Control cabinet: fully wired, including 5 m connection cable Guedpfjt Rivtox Aafef - Main motor: 45 kW, 400 V - 50 Hz - 3-phase - Equipped with a sliding gate with a pressure bar - Painting: body RAL 9005 (black), hopper + drive guard RAL 5012 (blue) Equipment: Including automatic star-delta starter, automatic shutdown in case of idling, timed control to avoid unnecessary idle times Performance-enhancing step control for hydraulic sliding gate, vibration-damping machine feet including a base frame for integrating a discharge conveyor belt including wiring for integrating a discharge conveyor belt and an overbelt magnetic separator.

Condition: used, Year of construction: 1975, functionality: limited functionality, machine/vehicle number: 54010GA, nominal power: 1,471 kW (2,000.00 HP), Shredding Plant 2000 HP 54010GA Dismantled Gjdpfxjy Hpn Ds Aafjuf Inspected and evaluated by Lindemann Germany GmbH: Overall, the shredding plant is a good investment for a new owner. The previous owner maintained the plant very well for 45 years. A very large spare parts package is also available on request. Every spare part is provided in duplicate. Even a second hammer mill is available for purchase upon request. Assistance can be provided for transport and installation, or the entire plant can be erected for you.

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Godpfey E S S Aex Aafsuf

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Godpfeyg Irasx Aafsuf Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Gedoxdwiujpfx Aafeuf Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Gedpfoxrn Hgsx Aafjuf Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: excellent (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, conveyor belt length: 7,000 mm, conveyor belt speed: 50 mm/s, conveyor belt width: 1,000 mm, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding system Type: Size L Number of roller teeth: 20 Feed hopper Loading height: 3,650 mm Feed width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Guodpoxln Rlofx Aafef Basic Inventhor Type 6 package Load-sensing system Longitudinal conveyor (conveyor length: 2,900 mm, conveyor width: 800 mm) Centrally arranged lubrication bars 24 V electric control system Full radio remote control Large side maintenance doors (GRP) Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, bilateral water spray Overband magnet (neodymium) Frame for 7 m overband magnet

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Guedpfx Aaoy D Nktjfsf Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,703 h, functionality: fully functional, machine/vehicle number: Bau Nummer 443, overall weight: 30,000 kg, total width: 2,500 mm, transport width: 2,500 mm, year of last overhaul: 2025, We offer this refurbished Doppstadt DW-3060 K single-shaft shredder, manufactured in 2019. Telematics active until 06/2028 All bearings and all conveyor belts are original, new Doppstadt parts All wear parts are original, new Doppstadt parts Guedpfszhlpwox Aafof Manufacturer: Doppstadt Model: DW-3060 K Year of manufacture: 2019 Condition: refurbished Category ID: 2097 Type ID: 2590 Machine type: Single-shaft shredder If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: W09268325N2D38082, permissible axle load: 9,000 kg, conveyor belt speed: 2,900 mm/s, roller diameter: 600 mm, roller length: 2,200 mm, number of rollers: 1, As-new Doppstadt Inventhor 6 with only 150 operating hours! TECHNICAL DETAILS Input hopper length: 3,390 mm Drum length: 2,200 mm Drum diameter: 600 mm Number of drums: 1 Permissible total weight: 25,000 kg Permissible load at coupling point: 1,000 kg Permissible axle load per axle: 9,000 kg Discharge belt width: 1,000 mm Discharge belt length: 4,900 mm Belt speed: 1.3 - 2.9 m/s MACHINE DETAILS Length: 12,960 mm Width: 2,540 mm Height: 3,390 mm Transport width: 2,540 mm Transport height: 3,610 mm Transport length: 9,140 mm Engine power: 310 kW / 421 HP Fuel tank: 500 l Gujdpfoxcvpwex Aafjf Operating hours: approx. 150 h EQUIPMENT Overband magnet

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, TECHNICAL DETAILS Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Roller Number of Rollers: 1 Roller Length: 3,000 mm Maximum Roller Speed: 32 rpm Permissible Gross Weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Operating Dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport Dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total Weight: 32,000 kg Drive Engine Type: Diesel engine Brand: MTU 6R 1300 Emissions Standard: Stage V Rated Power: 390 kW / 530 HP Tank Capacity: 950 l Operating Hours: 5,000 h Gsdpfoxny E Hsx Aafouf EQUIPMENT Overband Magnet