Used Sheet-Bending Machines for sale (67,063)

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Dkjdettc Uaspfx Acyjw

Condition: good (used), *Description:* ZOPF RS 302 three-roller bending machine, manufactured in 1990. German-made. Dedezxhh Rjpfx Acyjkw Manual machine mounted on a base for bending round, square, flat, and shaped steel, stainless steel, and aluminum tubes. Mounted on a metal frame with integrated storage. Complete machine with rollers. Ideal for locksmithing, sheet metal work, and guardrail fabrication. *Specifications:* - *Brand / Model*: ZOPF RS 302 9048 L - *Year*: 1990 - *Type*: Manual three-roller bending machine - *Adjustment*: Upper roller adjustable by handwheel - *Mounting*: On a steel base with doors - *Safety*: Emergency stop - *Equipment*: Set of rollers included *Condition:* Good overall condition. Machine is visible and operational. Video available upon request.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,600 h, functionality: fully functional, machine/vehicle number: P4M_812_3228, working range: 2 mm, overall weight: 13,000 kg, total height: 2,320 mm, type of input current: three-phase, total length: 4,000 mm, total width: 2,210 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 23 A, table length: 2,180 mm, Panel Bender SALVAGNINI P2 LEAN -2120, manufactured at the end of 2021. Software: MAC 2.0 Dkodpo Aigm Dofx Acyjw First start-up: January 2022 Low number of operating hours. Fully functional, with all documentation (layout, certification, quotation, etc.) available. Prepared for shipment by SALVAGNINI, with a report provided.

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-70 WORKING LENGTH 700 MM Dodpfshy Ekiox Acyokw ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -1.0 MM DEVICE WEIGHT 70 KG.

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-100 Dkedpfehwzttex Acyow WORKING LENGTH 1000 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,8MM DEVICE WEIGHT 100 KG.

Condition: good (used), sheet width: 1070 mm Dedpfx Aceg Rypmsyekw plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m - upper roll can be swing out - operation via hand wheel

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Dkodpfxsb Hxzyj Acyow Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Dkodjzuzpyopfx Acysw Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Our machine park is regularly supplemented, we use the best machines to guarantee the highest quality. We know all of our devices inside out. For years. And as a producer, we are always up to date. bending edge only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cut-outs to the side Dsdpjhbcxmjfx Acyjkw Recess 60mm / 45 ° Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Max. pressing force: 360 kN Mounting height: 300 mm Clearance between columns: 932 mm Reach of the arms: 150 mm Working height: 1150 mm Working speed, Y-axis: 220 mm/s Maximum stroke of the Y-axis: 120 mm Inertial run time: max. 90 ms Minimum safety distance: 180 mm Return speed: 220 mm/s Speed of the X-axis: 1000 mm/s Speed of the R-axis: 330 mm/s Speed of the Z-axis: 1000 mm/s Positioning speed of the X-axis: 0.04 mm Positioning speed of the X-axis: 0.04 mm Positioning speed of the R-axis: 0.06 mm Travel range, X-axis: 240 mm Travel range, R-axis: 80 mm Space requirement: 1805 x 1330 x 2380 mm Machine weight: approx. 2,600 kg Total connected load: approx. 6 kVA Dkede Aifyxspfx Acyjw Options: Rear backstop system, 6 axes Upper and lower tool clamping, hydraulic Comfortable support table in front (foldable) Comfortable footrest Work area lighting in front (LED) & in the back Swiveling control unit BendGuard safety device (with blocking laser) Ergonomics package Productivity Plus package Bending line laser Graphical workshop programming

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-70 WORKING LENGTH 700 MM Dkodpfx Aohy Ekfjcyew ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -1.0 MM DEVICE WEIGHT 70 KG.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change Dksdjymf Skopfx Acysw - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical Dkodpfsz S Afpsx Acysw -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Dksdpfx Aoyr H A Iecyjw Inspection and demonstration possible by appointment.

Condition: new, Year of construction: 2025, SECTIONAL SHEET BINDING MACHINE MODEL ZGDS-125 WORKING LENGTH 1250 MM ALL THREE ROWS OF STONE REMOVABLE ADJUSTABLE MAXIMUM THICKNESS OF BENDED STEEL SHEET -0,7 MM DEVICE WEIGHT 125 KG. Dsdpfx Ashy El Sjcyokw

Condition: new, Year of construction: 2025, The ZGR-3500 press brake is built with very high strength, so the press brake is very robust and stable. The folding machine ensures high precision for daily use on the construction site. In addition to all cutting and edging work, we can equip the edging bench in the manual folding machine. Bending machine ZGR-3640/0.65mm Maximum working width of the press brake: 3640 mm Sheet steel: up to 0.65 mm Bending angle: 145 degrees Cutting along the entire working length Raise the upper cheek in three layers. Maximum clear width between the cheeks: 80 mm Rear rack for holding sheet metal Gas springs for lifting the cheeks Weight of the press brake: 550 kg Shipping PLEASE ASK Roller scissors plus 350 euros Dksdpfshqxk Esx Acyjw Manual folding machine plus 75 euros Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, functionality: fully functional, Year of construction: 2026, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm Dksdpsx I Afxofx Acyew - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm Djdpfx Acsyh D Nnjyjkw pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. *

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam Dsdpfxswg Ru Es Acyskw • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Dkjdpfxoyfmwxs Acyew Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator Dsdpeyviwqefx Acyjkw - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: 950 mm Workpiece thickness: min. 0.5 mm Workpiece thickness: max. 120 mm Number of stations: 3 Station 1: Sanding belt Station 2: Rotating brush Station 3: Rotating brush MACHINE DETAILS Control: CNC Connected power: 39 kW Dkodpfx Aco Aidv Soyew Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: Dksdpfxsz Ny Rko Acyjw • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, Dkodpfepgmqijx Acyow open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm Dsdpfx Acepgmq Uoyjkw max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document