Used Sheet To Sheet Laminator for sale (18,939)

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We supply you with the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #502 Please note: Images are sample pictures. Actual equipment and color may vary. STS V-2.0 Tank • Tank capacity: 2,000 liters • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Side rinsing port in the tank for removing contamination or blockages without opening the tank cover • Tank lid opens fully toward the passenger side and is secured with hook bolts • Two safety stages installed as standard to prevent compressor damage • Siphon separator – overflow protection with two balls and sight glass • Pressure gauge on the over-suction unit with protective guard • Mechanical level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 l/min air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to avoid exposure inside the engine unit • Silencer for vacuum compressor with oil trap • Stainless steel heat shield above exhaust • 1 liter biodegradable compressor oil, stored in oil bottle holder • 5-liter fuel canister in holder • Standard funnel with long neck for changing and refilling engine oil • All engine components and accessories stored in lockable aluminum engine box, powder-coated in your desired color Chassis • Self-supporting chassis, fully hot-dip galvanized Hedexffv Sepfx Acvok • Low-loader tandem axle chassis, 3.5 tons • Track width aligned with passenger cars and Sprinters for optimal driving performance • Lowest possible center of gravity for the tank • Two axles, each with 1,750 kg load capacity, independent wheel suspension from a renowned manufacturer • Continuous welded V-drawbar • Sturdy fenders with metal lamp housings • Stake holders for quick securing of suction hoses with rubber straps • Storage options for tools and accessories Vacuum Tank • Overrun brake with auto-reverse • Automatic safety ball coupling • Reinforced jockey wheel • 13-pin electrical connection Connections and Hoses • 2x suction hoses (3”) 5 meters long, with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot coupling (3”) on lower tank lid • 1x Perrot coupling (3”) on the right side in driving direction Special builds and custom equipment available on request – Check us out: For more detailed information and/or images, please contact us directly. A wide selection of further vehicles for SALE or RENT can be found at: Subject to alterations, prior sale, and errors. The buyer is required to independently verify the condition and equipment of the goods. Sale exclusively under our general terms and conditions and with exclusion of any warranty.

Condition: new, overall weight: 3,500 kg, color: silver, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We provide you with the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Hedjxd Nucepfx Acvjk Internal number: #490 The images are sample images. Actual equipment and color may vary. STS V-2.0 Tank • 2,000-liter tank capacity • Tank hot-dip galvanized • Tank slightly sloped to the rear for easier cleaning • Side rinsing port in the tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully towards the passenger side and is secured with hook bolts • Two safety stages standard to prevent compressor damage • Siphon separator, overflow with 2 balls and sight glass • Pressure gauge installed on the suction assembly with protective bracket • Mechanical fill level indicator with colored scale Engine & Compressor • Vacuum compressor MEC 3000 with 3,500 l air performance • Maximum vacuum -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure 0.49 bar • Maintenance-free belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal intake hose to prevent debris entering engine unit • Silencer for vacuum compressor with oil catch • Stainless steel heat shield above exhaust • 1-liter biodegradable compressor oil stored in holder • 5-liter gasoline canister in bracket • Standard: Long-neck funnel for oil changes and top-ups • All engine components and accessories stowed in lockable engine box • Engine box made of aluminum and powder-coated in color of choice Chassis • Self-supporting chassis, fully hot-dip galvanized • 3.5t low loader tandem axle assembly • Track width matches passenger cars & Sprinters for optimal handling • Lowest possible suction tank center of gravity • 2 axles, each rated at 1,750kg load capacity, individual wheel suspension by branded manufacturer • Continuous welded V-drawbar • Robust fenders with metal lamp housings • Stake supports for quick securing of suction hoses with rubber bands • Storage options for tools and accessories Vacuum Tank • Overrun brake with automatic reverse function • Automatically locking ball hitch • Reinforced jockey wheel • 13-pin electrical connector Connectors and Hoses • 2 suction hoses (3") 5m long, with Perrot couplings • 1 suction lance 3" (1500mm long) • 1 Perrot connection (3") at lower tank lid • 1 Perrot connection (3") on the right-hand side, in the direction of travel Custom builds and special equipment available on request – Check it out: For further details and/or pictures, please contact us directly. A large selection of other vehicles available to BUY or RENT can be found at: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. The sale takes place exclusively under our general terms and conditions and with exclusion of any warranty.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Hjdpfev I Sp Iex Acvok Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, total length: 5,700 mm, total height: 2,313 mm, input current: 400 A, type of input current: three-phase, working length: 3,200 mm, Equipment: CE marking, We are offering for sale a very well-maintained Schröder PowerBend Professional 3200/3.0. The machine is in excellent condition and is immediately ready for use. • Year of manufacture: 2016 • Working length: 3,200 mm • Usable length: 3,240 mm • Machine depth (with rear stop 1,600 mm): approx. 3,223 mm • Bending beam adjustment: up to 150 mm • Bending center adjustment: approx. ±20 mm • Machine height (with gantry): approx. 2,313 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA • Pneumatics: 6 bar • Weight: 6,700 kg • Stroke: approx. 500–540 mm • Number of bends so far: approx. 310,000 • Location: 49170 Hagen a.T.W. The control system was recently renewed and is up to date. The machine is fully operational and can be inspected by appointment. Hedpfjytnvrox Acvok Other information: Sale as seen Inspection and collection in Hagen a.T.W. by arrangement Location: Hagen a.T.W. Sale by company → without warranty or guarantee, subject to prior sale and errors.

Year of construction: 2026, condition: new, functionality: fully functional, load capacity per stand: 1,000 kg, Electronic rotary positioner with height adjustment via index hole pattern Rotary turner Rotary stand Rotary machine Available on request with your individual fixture. Product Description: Our moveFLEX solo combines maximum precision with optimal flexibility. The manually adjustable height, with an index hole pattern on both sides, allows you to easily adapt the working height to various requirements. The electric rotary axis provides smooth and precise rotation of the fixture. Thanks to integrated forklift pockets for safe transport by forklift, our moveFLEX solo is ideally suited for changing work environments. Application Area: Hsdpfsyt Dp Uox Acvek Our moveFLEX solo is ideal for welding, assembly, and processing tasks, especially in applications requiring flexible and precise positioning. Suitable for use in covered, industrial halls with a temperature range of 10-40°C. Level, load-bearing hall floor with a maximum inclination of 1% is required. The moveFLEX solo should only be connected to a power source equipped with a compliant residual-current device (RCD), type B, rated for 30mA. Safety Devices: Emergency stop function at the control panel.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.5 kW (2.04 HP), overall weight: 575 kg, total width: 1,250 mm, total length: 1,340 mm, total height: 1,300 mm, type of input current: three-phase, load capacity per stand: 2,000 kg, Electronic rotary positioner with counter bearing and height adjustment via grid hole pattern Rotator Rotating frame Rotary machine Custom fixture available upon request. Product description:  Our moveFLEX duo combines ultimate precision with maximum flexibility. The manually adjustable height, using a grid hole pattern on both sides, allows optimum adaptation of the working height to various requirements. The electric rotary axis enables smooth and precise rotation of the fixture. Thanks to the combination of integrated wheels and forklift pockets for safe transport by forklift truck, the moveFLEX duo is perfectly suited for changing work environments. Field of application:  The moveFLEX duo is ideal for welding, assembly, and processing tasks, especially for applications that demand flexible and precise positioning.  Suitable for use in covered, industrial-grade workshops with temperature range of 10-40°C.  Level, load-bearing workshop floor with a maximum incline of 1%.  The moveFLEX duo must be connected only to power sources equipped with a compliant residual current device (30mA) RCD Type B. Safety features:  Emergency stop device on the control panel. Technical features:  Height adjustment: Individually adjustable working height.  Electric rotating mechanism: Precise rotation for optimal processing.  Flexible transport: Integrated wheels for easy movement.  Forklift pockets: Safe transport with a forklift truck.  Robust construction: Stable design for demanding industrial applications.  Safety & operator comfort: Hjdjx Hp Ttopfx Acvjk Intuitive controls for easy operation.

Condition: used, mileage: 20,000 km, power: 188 kW (255.61 HP), first registration: 02/1979, fuel type: diesel, overall weight: 14,300 kg, axle configuration: 2 axles, color: black, gearing type: mechanical, Year of construction: 1979, Equipment: all wheel drive, Manufacturer MAN Model 5 To KAT MIL 4x4 Year 1979 Condition Good Serial Number 4510642 Ref. nr. 1407968 Reg. date: Engine: V8 Hk: 255 Km: 20000 Gearbox: Manual, Converter Hjdpsxb In Nsfx Acvok Diesel tank: 1 Tank liter: 350 Rear view camera: ? Drum brake: ? Tire Size: 14.00R20 Cover% left 40 - 40% Front suspension: Springs Suspension rear: Springs Toolbox: ? Total weight: 14300 kg. Net weight: 8920 kg.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,100 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 2,300 kg, nominal power: 23.5 kW (31.95 HP), 12 months warranty, 1800 operating hours Hsdpfxeyw Hhvs Acvsk

Condition: used, Year of construction: 2022, machine/vehicle number: SN048183, total length: 2,170 mm, total width: 3,300 mm, total height: 2,260 mm, overall weight: 5,000 kg, nominal power: 26.9 kW (36.57 HP), pass-through width: 1,350 mm, Equipment: conveyor belt cleaning brush, magnetic track 400 mm Hedeyw Hg Eopfx Acvok

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Hsdedr R Tcjpfx Acvek Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: used, mileage: 177,450 km, power: 310 kW (421.48 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, loading space volume: 48 m³, loading space length: 7,300 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, ACTROS 1842 L Box Truck 7.30 m with Tail Lift 2,000 kg + Trailer Hitch * Internal height approx. 2.70 m * Vehicle No. for customer inquiries: 4551 * MirrorCam * Engine Euro VI, E * Predictive Powertrain Control * Distance Assist * Trailer Stability Assist (TSA) * Rear axle differential lock * Air conditioning * Refrigerator on engine tunnel * Lower bunk * Navigation system * Lane Keeping Assist * Environmental badge (green) * Traffic Sign Assist * Tail lift * Standard trailer coupling, D40, Ringfeder * Attention Assist * Comfort Package for S/M cab * High Performance Engine Brake * Light sensor * Air suspension, rear axle * Adjustable air deflector * Multimedia cockpit, interactive * Rain sensor * Safety Package, without roll control * Full service history * Electronic Stability Program (ESP) * Fuel tank 630 l, left, 650 x 700 x 1600 mm, aluminum * Hot-water auxiliary heater, cab * Active Brake Assist 5 * Actros S/M cab, model generation 5 * Driver airbag * Trailer brake, 2-line, brake connections left * 24 V trailer socket, 15-pin * Electronic brake system with ABS and ASR * Comfort driver's air-suspended seat * Electronic parking brake * Mercedes PowerShift 3 * Central locking system * External sun visor, transparent * Cruise control * Pre-installation for Mercedes-Benz Truck App Portal * Two-seater * AdBlue tank 60 l, left * Roof hatch/ventilation flap * Weight variant 18.0 t (7.5/11.5) * Heating, electronic air supply unit * Leather steering wheel * M-cab ClassicSpace, 2.30 m, 170 mm tunnel * Engine OM471, R6, 12.8 l, 310 kW (421 hp), 2100 Nm * Wheelbase 5500 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front axle * Side sunblind, driver's side * Front axle stabilizer * Front spring 7.5 t, single-leaf * Pre-installation for toll recording * Transmission G 281-12/14.93-1.0 * Power steering oil cooling * Secondary oil retarder * 2/3 doors No liability for printing and typing errors. Sale only to commercial customers. Errors and prior sale excepted. Changes, intermediate sale and errors expressly reserved. Description serves to identify the vehicle and does not constitute a guarantee within the meaning of sales law. Binding description as per purchase contract. Hodpfx Ajx Rd Utocvsk * TOP SERVICE + QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer. Warranty insurance available upon request from insurer. * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our on-site partners. * 30-day export license plates All export documents possible upon request, to be arranged individually. * Toll-Collect registration service possible in-house. * Free transfer from Stuttgart airport or Metzingen (Württ) train station. * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, working width: 1,400 mm, Neschen Jetlam 1400 – Thermal Laminating Machine, 1400 mm, 400V, Year 1997 Hodpfxeyttdne Acvsk For sale is a Neschen Jetlam 1400 thermal laminating machine (manufacturer: O.M.M.A., Italy), which is in excellent technical condition. Technical specifications: - Model: Jetlam 1400 (Serial No. 5620.67) - Working width: 1400 mm - Year of manufacture: 1997 - Power supply: 400 V / 3-phase - Power rating: 6.3 kW - Top and bottom heating (Befran controllers) - Integrated vacuum table - Cooling section included - Thickness indicator (mm display) - Forward/reverse operation, stepless speed control Condition: The machine was in productive use for approx. 10 months (double-sided thermal lamination on paper) and operated without issues during this time. No repairs needed. All rollers and cores are complete and present. Original manual included. Functional test under power can be arranged on site. Scope of delivery: Machine including original manual and available roll materials. Logistics: Forklift and pallet truck available. Loading onto trailer or van possible. Collection by buyer. Location: 59557 Lippstadt, NRW, Germany Private sale, with exclusion of any warranty or guarantee.

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Hedpsyr R Uhsfx Acvsk Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Hedoyr Affspfx Acvok

Condition: new, Year of construction: 2026, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: Hedpfxjq Ixuks Acvjk ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2026, Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Hjdsym Abvspfx Acvsk Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: used, mileage: 498,811 km, power: 184 kW (250.17 HP), first registration: 09/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, loading space volume: 38 m³, loading space length: 7,080 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, TGL 12.250 BL refrigerated box, 7.40 m, with 1.5 t tail lift. * FROGOBLOCK FK 13 380 V electric cooling for travel and stationary use * Left compartment 1.6 m wide + right compartment 0.85 m wide * Vehicle number for customer inquiries: 3966 * Air conditioning * Air suspension * Tail lift * Electronic Stability Program (ESP) * EBS * Electric windows * On-board computer * Power steering * Electric side mirrors * Anti-lock braking system (ABS) * Environmental sticker (green) * Two-seater * Service history maintained * 2/3 doors No liability for printing or typographical errors Sale to businesses only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Warranty insurance is available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested individually. Hedpfx Aetuhn Uocvek * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION/TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: good (used), Hydraulic tank cap, tank cap Hodeykz Rkspfx Acvjk -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake Hsdpsx Ruphefx Acvjk - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: excellent (used), machine/vehicle number: YS2P4X20002017301, mileage: 867,099 km, power: 199 kW (270.56 HP), first registration: 07/2006, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro4, total length: 6,900 mm, total width: 2,500 mm, Year of construction: 2006, YS2P4X20002017301 = More information = Number of cylinders: 5 Engine capacity: 8.867 cc Empty weight: 9.880 kg Carrying capacity: 8.320 kg GVW: 18.200 kg Hjdpfx Acsymp Ebsvjk Technical condition: very good Visual appearance: very good Price: On request Registration number: BS-DJ-82

Condition: used, mileage: 56,699 km, power: 129 kW (175.39 HP), first registration: 04/2024, fuel type: diesel, empty load weight: 4,017 kg, maximum load weight: 3,183 kg, overall weight: 7,200 kg, axle configuration: 4x2, wheelbase: 5,100 mm, next inspection (TÜV): 04/2026, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 34 m³, loading space length: 5,940 mm, loading space width: 2,480 mm, loading space height: 2,370 mm, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, tail-lift, CERTIFIED PRE-OWNED standard, color white (IC 194), unladen weight: 4017 kg, permissible total weight: 7200 kg, cargo area (L x W x H): 5,940 mm x 2,480 mm x 2,370 mm, cargo volume: 34 m³, fabric seats, interior color anthracite, leaf-air suspension, 1 x airbag, tail lift, tachograph, electronic stability program (ESP), automatic climate control, passenger bench seat, radio, digital radio reception (DAB), power steering, adjustable steering column, electric windows, external temperature display, electrically adjustable and heated exterior mirrors, immobilizer, central locking with remote control, tinted windows, twin tires, wooden cargo floor, spare wheel, daytime running lights, telematics system, speed limiter: 90 km/h, trailer coupling pre-installation 12V 13-pin, air conditioning compressor 170 ccm, telematics system preparation, former rental vehicle, LOCATION: MUNICH / Your contact: Mr. Räpple / Tel.: more vehicles in stock / subject to errors and changes. Hsdpsyxhutofx Acvsk

Condition: used, maximum load weight: 2,570 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 07/2020, next inspection (TÜV): 06/2026, loading space length: 7,960 mm, loading space width: 2,422 mm, total width: 2,422 mm, total height: 690 mm, !?The trailer is located in Eggenfelden?! Viewing / collection only possible by prior appointment. Sale is carried out on behalf of the owner. Purchase contract is concluded directly between the owner and the buyer. Well-maintained, rarely used car trailer, make JUZJADE, type R2 variant 14N, with a permissible total weight of 3,500 kg. Axle spacing 750 mm, which for driving license purposes is considered as a single axle. Unladen weight: 930 kg Overall length: 9,490 mm Width: 2,422 mm Height: 690 mm Axle spacing: 750 mm (i.e. tandem axle, as < 1 m) Axle width: 2,100 mm Loading area length: 7,960 mm Loading area width: 2,422 mm With drive-on ramps to the towing vehicle Hjdpsyxgtbjfx Acvsk Unladen weight: 930 kg Tyres / rims: 195/50 R 13C 103M - 6Jx13 ET30 Despite careful processing, errors in data input or transmission may occur in the vehicle description, including the images. Subject to errors and prior sale.

Condition: used, mileage: 355,811 km, power: 175 kW (237.93 HP), first registration: 06/2014, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 38 m³, loading space length: 6,940 mm, loading space width: 2,460 mm, loading space height: 2,250 mm, Year of construction: 2014, Equipment: ABS, electronic stability program (ESP), soot filter, tail-lift, ATEGO 1324 L refrigerated box, 7 m, with 1.5-ton MBB tail lift. * MITSUBISHI TDJ 430 D refrigerated truck * Payload approx. 6,150 kg * Vehicle no. For customer inquiries: 3583 * Euro VI engine version * Air suspension, rear axle * Rear axle differential lock * Electronic Stability Control (ESP) * Rockinger trailer hitch * High Performance Engine Brake * Cruise control * Digital tachograph, EC, engine speed, ADR * Mercedes PowerShift 3 * G 90-6/6.70-0.73 transmission * Transparent exterior sun visor * Electric windows, both sides * Comfort driver's suspension seat * ABS brakes * Particulate filter * Environmental sticker (green) * Two-seater * In-line engine, 6 cylinders * Metallic color control * Weight variant 13.5 t (5.1/9.3) * Fuel preheating * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm * AdBlue tank 25 l * Plastic tank 180 l, left * Tubeless tires, 285/70 R 19.5 VA * Electric main mirror, driver's side * ClassicSpace S cab, 2.30 m, tunnel * Reverse alarm * Roof hatch/roof ventilation flap * High storage compartment on engine tunnel * Stabilizer, under frame, rear axle * Wheelbase 4760 mm * Heating, electronic compressed air supply unit * Cross member, trailer hitch G135 * Tail lift control pre-installation * Service history maintained * Metallic paint finish * 2/3 doors No liability for printing or typographical errors Sale to businesses only Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty under the terms of sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. Hjdepxkkropfx Acvek Warranty insurance available upon request from the insurer. * TÜV / UVV LBW / tachometer inspection and OBU device installation by our local partners. * Customs license plate valid for 30 days. All customs documents for export are available, but must be requested separately. * Toll Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * --- Visit us on our website at * Over 200 vehicles always in stock.

Condition: used, mileage: 149,811 km, power: 330 kW (448.67 HP), first registration: 02/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, loading space volume: 37 m³, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, ACTROS 1845 L Refrigerated Box Body SCHMITZ 6.50 m with Doors + BÄR Tail Lift 2,000 kg * L-cab StreamSpace, 2.30 m, tunnel 170 mm with 1 lower bunk * CARRIER SUPRA U 850 (diesel engine) and standby cooling ELECTRIC 380 V ONLY IN COMBINATION WITH TRAILER VEHICLE NO. 4396 Total net price €126,800 + * Vehicle number for customer inquiries: 4395 * MirrorCam * Predictive Powertrain Control * Secondary water retarder * Sight Package * Permanently active Turn Assist * Traffic Sign Assist * Automatic high/low beam and cornering lights * Navigation system * Turn Assist * Distance Assist * Lane Keeping Assist * Engine in compliance with EURO VI, D * Bi-xenon headlights * Rear axle air suspension * L-cab StreamSpace, 2.30 m, tunnel 170 mm * Air conditioning Hjdjxaffiepfx Acvok * Rear axle differential lock * Safety package, without anti-roll control * Multimedia Cockpit, interactive * Light sensor * Rain sensor * Attention Assist * Stability Control Assist (ESP) * Standard trailer coupling, D40, Rockinger * High Performance Engine Brake * Tank 630 l, right, 650 x 700 x 1600 mm, aluminum * Digital tachograph, 2nd generation, ADR * L-cab * Electric roof hatch * Additional hot water heating, driver's cab * Comfort bed, lower * Front axle air suspended * Active Brake Assist 5 * Preparation for Mercedes-Benz Truck App Portal * Actros * Cruise control * Driver’s airbag * Chrome interior package * Mercedes PowerShift 3 * Transmission G 211-12/14.93-1.0 * Comfort central locking system * Central locking system * Air horn * Comfort driver’s suspension seat * Rear trailer brake connector, Duo-Matic + standard * Trailer brake, 2-line, brake connectors left * Electronic parking brake * Electronic braking system with ABS and ASR * Particulate filter * Environmental badge (green) * Two-seater * Metallic paint * Weight option 20.5 t (8.0/13.0) * Engine OM 471, R6, 12.8 l, 330 kW (449 HP), 2,200 Nm * Headlight cleaning system * AdBlue tank 60 l, left * Pre-equipment for toll recording * Pre-equipment for CB radio, 12 V, DIN slot * Tubeless tires, 385/65 R 22.5 FA/FRA/RRA * Trailer socket 24 V, 15-pin * Overhead storage flaps, above windscreen * Drawers under bed * Side sunblind, driver’s side * Wheelbase 5,200 mm * Electronic air supply unit for heating * Truck Data Center 7 * Remote Online * Requires FleetBoard Manager App * Heavy vehicles from 18 t, on-road * Pre-equipment for tail lift control * Full service record * Trailer Stability Assist (TSA) * 2/3 doors * Metallic paint No liability for printing or typing errors Sale only to business customers Subject to error and prior sale – Changes, prior sale, and errors expressly reserved. This description serves to identify the vehicle and does not constitute a warranty in the legal sense. Only the description in the purchase contract is binding. * TOP SERVICE + QUALITY * We can provide a LEASING–FINANCING–HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * Customs plates for 30 days All export customs documents are possible but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZ

Condition: used, mileage: 506,000 km, power: 265 kW (360.30 HP), first registration: 01/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro4, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGX 26.360 construction machinery transporter * First registration: 01-2009 * EURO 4 * Automatic transmission * Retarder * Lift/steering axle * 9-ton ramps Hsdsyt U Dvepfx Acvjk * Suitable for transporting asphalt milling machines * More pictures and videos via Whatsapp * Information subject to change and prior sale reserved.