Used Sheet Forming Machine for sale (67,466)

Condition: ready for operation (used), Year of construction: 1987, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible. Bjdsw H At Topfx Acvslf

Condition: ready for operation (used), Year of construction: 1991, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible. Blodjw H Audjpfx Acvof

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale Bedpfx Asfnabyocvslf - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Blsdpfx Asb Na Eqecvjf Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets Blsdpfsb A H R Esx Acvof -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 1984, Equipped with: 1 Grip feeding system right hand side 3 Press units á 180 kN = Total 540 kN Bledpfx Aema S Nrscvsf 4 Standrad slide units 1 Narrow slide unit working range: wire diameter range: up to 10,0 mm strip metal width: up to 100 mm feeding length: up to 250 mm output: up 135/min.

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm Bedpfevuzvdsx Acvolf stripmetal width: max. 50 mm feeding length: max. 200 mm output: max 450/min.

Condition: excellent (used), Year of construction: 1977, equipped with: 1 pce. BIHLER auccustic cabine Bjdpfxjfzr Aqs Acvslf 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: Bljdpfsn E N Ndjx Acvof 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm Bledpfsrpk Axox Acvef output: up to 250/min.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: Blodpjtmtzkefx Acvjf 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN Bedpspq H Upjfx Acvslf 2 Narrow-slide-units 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side Bjdpfx Aowxarqscvjlf 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min Bjdpfstmty Njx Acvolf

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Bljdpotqf Iqefx Acvsf Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. Bjdjyi Eqxjpfx Acvjlf The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours.

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Bljdpfx Ajn Sm Ddjcvof Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement Blodsx Eb Abopfx Acvef If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally designed folding machine is the basis for years of use of the machine. It is therefore important to have a trustworthy company at your side. Small, compact folding edge 1250 cm to steel sheet 0.8 mm, aluminum sheet 1 mm with built-in curl forming machine and roller shears. Bsdpfjcgbilex Acvjlf - Possibility of cheek adjustment - Weight: 49 kg - Bending beam: 15mm - Working length: 1.25 m - built-in bead machine -ᐳ tube diameter 14mm - 60mm opening - Bending radius: 145 degrees Price: 1.450 euros We are looking forward to your contact

Condition: like new (used), The VPX is used for: * Producing pouches from flat packaging material (film). * Filling the pouches with product which can be powdered, liquid, granulated, chunky and must have flowability and suitability for automated operation. * Closing the pouches by heat sealing or thermoplastic welding. Characteristics: * Roll diameter/width (max.): 450/550 mm (600/550 with unwinding device). * Bag width (min. - max.): 60-260 mm. * Bag length (min. - max.): 40-340 mm (680 mm with double drive). * Filling volume (max.): 3000 cm³ (8000 with double drag). Bsdoyn Hqqepfx Acvjlf Production output varies depending on product, format and filling capacity.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Bljdpfoyhnuksx Acvjf Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Bsdpeb Eg Nkofx Acvjlf Invoices are issued either with 0% as intra-Community delivery.

Condition: ready for operation (used), Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130. Bljdpfxohncwis Acvjf

Year of construction: 1991, condition: ready for operation (used), Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale. Blodpfxehtvmas Acvjf

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Bodpfx Asir U S Rjcvolf