Used Semi Automatic for sale (28,970)

Condition: used, Year of construction: 2012, overall dimensions 710x400x400 mm; power supply 230V, 50 Hz, 13 A; compressed air supply 5.5 bar; performance 6 cycles/min; for paper trays; Nlsdpewk Ddhofx Aa Esk weight 57 kg.

Condition: excellent (used), Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Nsdpfx Aasvyl Dve Eslk Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: Nedsq Dzi Tepfx Aa Ejlk 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length Nsdpfx Aewa Dhlja Ejlk • extraction nozzle - fi 140 mm • weight approx. 280 kg • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Njdpfxsn Ut Hcj Aa Ejlk

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor Njdsmb U Tujpfx Aa Eslk • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2025, cutting speed: 80 mm/min, cutting width (max.): 1,100 mm, cutting height (max.): 700 mm, warranty duration: 24 months, power: 7.5 kW (10.20 HP), PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL ROUND MAXIMUM DIAMETER: 700MM RECTANGULAR MAXIMUM DIAMETER: 700X1100MM SQUARE MAXIMUM DIAMETER: 700X700MM STANDARD MOTOR DRIVEN TABLE COLUMN TYPE SEMI-AUTOMATIC Nlodpfjvzh Dusx Aa Esk VARIABLE SPEED CONTROL PRECISION HEAD LANDING SYSTEM ASK FOR A QUOTE FOR MORE DETAILS.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Nlsdpjvyl Ihsfx Aa Eek Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.100 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzWf002, Equipment: Android Auto, CE marking, Chips Snacks Vertical Plantain Chips Peanut Nut Packing Rice Popcorn Potato Chips Sachet Packaging Machine .It is suitable for packing all kinds of grain material, sheet material,strip material which such ascandy,sunflower seeds,nuts,beans,potato chips,popcorn,dry fruit,vegetable salad (shreded or slicesvegetables,like iceberg lettuce.,cabbage,spring onion and leek ect.).frozen food.jelly.biscuitchocolate, corn, pet food, hardware and plastic can be weighed by the ration. Nledpfx Aajxu Uwqo Eek

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001 Nledetr Azkjpfx Aa Ejk

Condition: new, Year of construction: 2025, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture Nedpfx Aomb U Tfsa Eolk • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2025, cutting width (max.): 1,600 mm, cutting height (max.): 1,100 mm, warranty duration: 12 months, power: 7.5 kW (10.20 HP), STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1100 CAPACITY SQUARE (MM) 1100X1100 CAPACITY RECTANGULAR (MM) 1100X1600 SAW SIZE (MM) 67X1.6X11630 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 7.5 HYDRAULIC MOTOR (KW) 1.5 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 Nlsdpfxsvvcp Us Aa Esk FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 535 MACHINE DIMENSIONS (MM) 5390X1760X2875 WEIGHT (KG) 8000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. Nedpew E Epbofx Aa Eslk WRAPPING FUNCTIONS: 4 programs programmable by the operator: Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity Njdjv Iccfspfx Aa Ejlk • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2025, cutting width (max.): 2,500 mm, cutting height (max.): 1,500 mm, warranty duration: 12 months, power: 11 kW (14.96 HP), STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES Nedpsvvcpzofx Aa Eslk - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1500 CAPACITY SQUARE (MM) 1500X1500 CAPACITY RECTANGULAR (MM) 1500X2500 SAW SIZE (MM) 80X1.6X15650 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 11 HYDRAULIC MOTOR (KW) 2.2 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 600 MACHINE DIMENSIONS (MM) 7500X2150X3440 WEIGHT (KG) 21000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Year of construction: 2006, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on Kjeldahl method. Automatic, to analyse proteic nitrogen in raw material samples or processed material for food industry. Specific methods availables. Results complies with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty user free programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consume: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values Nedpfx Aofiliwja Eslk • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies there is the possibility of selling in installments. Price Euro 4.000 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up Nlsdpfx Aemb U Tbja Esk • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Nodpfx Aofiulfea Eelk Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. Nlsdpfxjmcbk Uo Aa Eek S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture

Condition: new, Year of construction: 2025, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life Nledpjmcbk Rjfx Aa Ejk • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2025, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity Nljdpjmb U T Hjfx Aa Esk • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2025, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: Nedpsmcaahofx Aa Eolk • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure Nledpfx Aaomb U T Re Eok • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales Nodpfemcaawox Aa Ejlk • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Nodpomb U T Usfx Aa Eslk • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales