Used Semi Automatic Flute Laminator for sale (27,812)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Concordia Sagittaria
1,733 km
Semi-automatic sawing machine
MACC320 MS
Call
Condition: new, Used MACC 320 MS Semi-automatic sawing machine
Good New " CE "
Data sheet attached.
Ready for delivery unless sold
The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time.
Vertical rotation on pivot with adjustable conical bearings without backlash.
Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw.
Appropriately sized flywheels.
Sturdy belt guides with watertight bearings and adjustable widia plates.
Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control.
Accident prevention safety device on the flywheel cover, on the control knob and on the blade.
Bwjdpjfibfaofx Afnsh
Cutting thickness 1,2 mm
Cutting range from 0 to 60° right
Adjustable stop for cuts of the same size
0.06 kW electric pump for belt cooling
Operation:
start of the cutting cycle by start button, the machine:
1. closes the vice and drives the band motor
2. lowers the arc for cutting
3. the bow returns to the starting position
4. stops the band motor
5. opens the vice
Possibility of manual cutting
ACCESSORIES ON REQUEST :
SINGLE-PHASE motor 69 m/1′
Speed variator from
Listing
Concordia Sagittaria
1,733 km
Semi-automatic inverter sawing machine
Macc420 DI
Call
Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision.
The robust structure gives the machine the necessary rigidity and precision to the cutting unit.
Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw.
Suitably dimensioned flywheels
Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates
Bwjdpfjfibd Tex Afnjh
Belt tension obtained by means of an electromechanical device with microswitch blade rotation control
Accident prevention safety device on the flywheel cover cover and on the blade
Cutting thickness 1.5 mm
Cutting range 60°sx 60°dx
Adjustable stop for cuts of the same size
Brush belt cleaning device
Hydraulic power unit motor 0,37 kW
0.09 kW electric pump for belt refrigeration
Jaw height 200 mm
Clamp jaw length 185 mm
Worktop height 760 mm
Machine weight 820 kg
Listing
Concordia Sagittaria
1,733 km
Semi-automatic inverter sawing machine
MACC650 DI
Call
Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit.
Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw.
Suitably dimensioned flywheels
Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates
Belt tension obtained by means of an electromechanical device with microswitch blade rotation control.
Accident prevention safety device on the fly cover cover and on the blade
Cutting thickness 1.5 mm
Cutting range 60°sx 60°dx
Brush belt cleaning device
Hydraulic power unit motor 0,37 kW
Bodjfh R Tuopfx Afnswh
0.09 kW electric pump for belt refrigeration
Clamp jaw height 250 mm
Jaw length 200 mm
Worktop height 760 mm
Machine weight 1250 kg 12260 N
Listing
Geisenheim
1,179 km
Semi-Automatic Crown Corker
RizzolioRLC1
Call
Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet.
Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden.
Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert.
Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest.
Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können.
Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel.
Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten.
Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück.
Maße: L 0,41m H 1,96 m B 0,41 m
Gewicht ca. 80kg
Gewicht mit dem automatischen Trichter:140kg,
Max Durchmesser der Flasche 220 mm nutzbare Höhe max 500 mm
Bwsdpfx Afjx Iv Tionoh
Listing
Roreto
1,518 km
SEMI-AUTOMATIC BORING MACHINE
GRIGGIOAlfa 27
Call
Condition: excellent (used), Horizontal units/supports (No.) 1 (adjustable 0° - 180°)
Drilling heads/Blocks for each horizontal unit (No.) 1
Spindles for each horizontal drilling head (No.) 29
Bwsdpohgbhcefx Afneh
Max. working width (mm) 1000 (ca.)
Vertical top pressure clamps (No.) 3
Total installed power (Kw) 3 (ca.)
Discover more used machines
Listing
Rodgau
1,238 km
Semi-automatic crosscut saw
SalvamacLEGEND 500
Call
Condition: used, Year of construction: 2025, New display machine! Partnership Edition, incl.:
- 1 meter roller conveyor to the right of the saw with galvanized rollers.
- 1 meter roller conveyor to the left of the saw with galvanized rollers.
- 1 piece pneumatically retractable stop with 200 mm length and operating switch mounted on the saw frame.
Bedsw Tfzlepfx Afnewh
SAFE – SOLID – FAST
This compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability.
Standard equipment:
- Automatic safety and pressure device
- Ergonomically positioned two-hand control
- Fixed safety shield
Load capacity: 230 kg, roller diameter: 60 mm, spacing: 250 mm, width: 350 mm. Including 100 mm high rear stop rule with scale.
- 1 HM saw blade, 500 mm, Z = 108
Technical data:
Maximum cutting range:
220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm
Saw motor: 5.5 kW
Saw blade diameter: 500 mm
Rotation speed: 2,800 rpm
Compressed air: max. 8 bar
Air consumption per cycle: 5 Nl
Extraction port: 1 x 120 mm / 1 x 100 mm
Voltage: 400 V / 50 Hz / 3~
Working height: 900 mm +/- 20 mm
Minimum distance between stop and saw blade: 70 mm
Minimum distance between two stops: 60 mm
Location:
Listing
Mala Vranjska
2,240 km
Semi-automatic double clipper
Poly ClipPDC 600
Call
Condition: used, Clipping machine
Manufacturer: Poly Clip
Model: PDC 600
Semi-automatic double clipper
Width: 1.000 – 1.100 mm
Depth: 780 mm
Height: 1.795 – 2.005 mm
Weight: 118 kg
Bsdsvy Trzopfx Afnewh
Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa
Air consumption: 4 bar 6,5 NL/cycle
Air consumption: 6 bar 8,5 NL/c
S-Clip: S 625, S 628, S 632, S 638
Listing
Siedlce
2,045 km
Semi-automatic band saw machine
CORMAKBS370H
Call
Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit.
The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking.
The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder.
Cutter for precise, professional work.
Torsion-resistant, rigid ductile iron arm and saw body.
Double sided quick lock vice
In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm.
Technical parameters
Size of the cutting band 3160 x 27 x 0.9 mm
Belt tension mechanical (manual)
Belt speeds 34.68 m / min
Arm Drop Adjustment stepless - hydraulic cylinder
Height of vice base 890 mm
Diameter of saw wheel 380 mm
Bjdpoycqhcofx Afnowh
Power 3phase, 400V
Main engine power S1- 1,5/S6 -1,9kW
Cooling pump motor power 46W
Dimensions with base 1850x950x1500 (2050) mm
Weight 491 kg
Listing
Siedlce
2,045 km
Semi-automatic band saw machine
CORMAKBS-320H
Call
Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter.
The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use.
Key advantages of the CORMAK BS320H
Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production.
Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use.
Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life.
Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating.
Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services.
Applications
The CORMAK BS320H metal band saw is recommended for:
manufacturing plants and structural fabrication companies (profiles, sections, steel components),
metalworking shops and tool rooms,
maintenance departments,
steel cutting services (repeatable series),
cutting pipes and profiles as a dedicated band saw for pipes and profiles.
Why choose this band saw?
If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation.
Technical specifications
Type: Semi-automatic band saw
Arm lifting/lowering: Hydraulic, infinitely variable
Blade speed: 37.5 / 75 m/min
Bwjdpoychwnsfx Afnoh
Miter cutting range: from −45° to +60°
Vise: Hydraulic
Minimum cutting diameter: Ø 5 mm
Minimum clamping length: 30 mm
Vise base height: 950 mm
Blade size: 27 × 0.9 × 2680 mm
Total power: 1.5 kW
Dimensions (L × W × H): 2000 × 860 × 1500 mm
Weight: 250 kg
Listing
Kalisz
1,779 km
Semi-automatic pallet nailing table
PneumaticoPT-2800
Call
Year of construction: 2022, condition: new, The semi-automatic Pneumatico PT-2800 table is ideal for the production of different sizes of pallets. Its construction allows for quick and easy change of dimensions of the pallets to be assembled, thus enabling the production of short series of packages. To operate the table, one operator is needed, who is able to pile from 180 to 210 pallets in an 8-hour shift (depending on the operator's skills and work organization).
Two nailers with nails of different lengths are suspended on two spring balancers, which ensures more ergonomic work. Pneumatic clamps position blocks and square timber in the right place, which translates into higher quality and repeatability of a given pallet size. Pneumatic lifting of the pallet makes the whole process less tiring for the operator.
• Work ergonomics: from 180 to 210 pallets within 8 hours of one operator's work
• Compact design: the table surface is only 4.94 m² (53.17 ft²)
• Versatility: the adjustable worktop enables the production of EUR pallets, 2, 3, 4 or 5 pallets
brackets or squared timber
• Time saving: quick conversion to a different pallet size
• Pneumatic clamp: possibility of precise centering of the blocks
• Pneumatic ejection of the pallet: to relieve the muscular system of the operator
• Mast with balancers: smooth movement of the nails during operation
• Additional template: the possibility of producing "bottoms" of the pallets
• Adjustable steel anvils: bending smooth nails in the production of pallets
• Innovation: the table diagonal adjustment module shortens the work by 50%;
Bwedpeht E T Rsfx Afnsh
Dimensions of produced pallets:
• Width: 900 - 2800 mm
• Length: 1500 mm
Listing
Conegliano
1,692 km
Semi-automatic cross-cut saws
SALVAMACNEW LEGEND 600
Call
Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power!
The Legend_600 has a completely painted, thick and reinforced steel structure.
The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.
Bedpefcdnlefx Afnewh
Listing
Rödermark
1,235 km
Two-column semi-automatic mitre band saw
MEBA
Call
Condition: good (used), Year of construction: 2009, machine/vehicle number: 60115, Offer 25422
Hydraulic Two-Column Guided Mitre Band Sawing Machine (Automatic)
Bedpfx Asx Aqxajfnswh
Technical Data:
- Fully automatic cutting process with hydraulic lifting/lowering of the saw frame
- Manual mitre adjustment with hydraulic clamping
- Automatic material feed unit, motorised mitre adjustment
- Saw blade dimensions: 4400 x 34 x 1.1 mm
- Cutting speed steplessly adjustable: 15 – 150 m/min
- Stepless cutting pressure regulation: 10 – 15 bar
- Lowering speed: 0 – 300 mm/min
- Cutting angle range: 30° – 90°
- At 90° round: 335 mm
- At 90° square/flat: 500 x 335 mm
- At 45° round: 330 mm
- At 45° square/upright: 320 x 335 mm
- At 30° square/upright: 170 x 335 mm
- Automatic material feed unit
- Discharge roller conveyor: 4000 mm
- Infeed roller conveyor: 4000 mm
- Drive: 400 V / 6.5 kW
- Space requirements approx.: W 2300 x H 1750 x D 2200 mm
- Weight approx.: 1800 kg
Listing
Sevenum
993 km
Semi/automatic drum filler / capper
OCMELFT-300
Call
Year of construction: 1990, condition: used, Inline Drum filling - / capping machine
Bwsdpfx Ajh Uca Sofneh
Pos. number: LTC00005452
Make: Ocme
Type: LFT300
Year of build: 1990
Range: 60 litre / 200 litre drum
Frame: steel
Dimensions: L x W x H = 6.000 x 2.400 x 3.000 mm
Weight: 3.500 Kg
Power-supply: 3x380 Volt – 50 Hz – 1,5 kW
Features: manual / automatic program
filling / capping /seal applicator / screw
Listing
Sevenum
993 km
Bucket sealer semi automatic
Soft Electronic SystemsPMS 2 GH
Call
Year of construction: 1988, condition: good (used), Bucket sealer
Bedpfx Aoigyp Hofnowh
Make: Soft Electronic Systems
Type: Semi-automatic bucket sealer
Model: PMS 2 GH
Capacity: Up to 300 buckets per hour
Frame: Stainless steel
Range: Buckets up to D = 300mm
Dimensions: L x B x H = 1.000 x 900 x 1.000 mm
Weight: 150 Kg
Power supply: 380 Volt – 50 Hz – 1,5 kW
Comp. Air: > 5.5 Bar
Features: manually positioning of bucket
automatic seal process (adjustable time)
automatic sliding towards cutting device
automatic pushing and rotating knife
manually reeling up the film
manually removing of bucket
Listing
Sevenum
993 km
Screw capper semi automatic
ZalkinTM-3
Call
Year of construction: 2004, condition: used, Semi automatic screw capper
make: Zalkin
Model: TM-3
Build 2004
now equiped for max 90mm cap
Bedoiby Hmepfx Afnswh
hand/footpedal operated
Listing
Sevenum
993 km
Can seamer semi automatic
LubecaLW210
Call
Condition: excellent (used), Make: Lubeca
Type: semi-automatic 1 head can-seaming machine
Model: LW210
Bwodpfjibc Eaex Afnsh
Range: diameter 99 – 235 mm
height 15 – 320 mm
Speed: up to 300 cph
Frame: mild steel, paint-coated
Dimensions: L x W x H = 700 x 800 x 2.000 mm
Power-supply: 380 Volt – 50 Hz – 1,1 kW
Control: on-off switch with overload-protection
security pneumatic double-hand operation
Tooling: 1 set tooling round can, customer choice
Listing
Siedlce
2,045 km
Semi-automatic band saw machine
CORMAKBS-530H
Call
Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles
The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics.
Key Advantages of the Machine
Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel.
Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation.
Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials.
Bwsdpfx Aow U Svlofnjh
Carbide and ball-bearing blade guides for durability and precise blade tracking.
Quick-release vise, manually or hydraulically controlled, adjustable left/right.
Miter cutting range from -45° to +60° with precise angle scale reading.
Heavy-duty cast-iron frame ensures cutting stability and long machine life.
Hydraulic feed rate control with adjustable return height of the saw arm.
Construction and Technology
The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating.
Cutting Precision and Efficiency
With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency.
Applications
The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing.
Standard Equipment
Control console with semi-automatic functions
Hydraulic vise
Blade cleaning brush
Coolant system with pump
Front material roller
Dial gauge blade tension meter
CE certificate and technical documentation (DTR)
Technical Specifications:
Parameter Value
Working height 965 mm
Cutting speed 20 – 70 m/min
Blade dimensions 3770 × 34 × 1.1 mm
Coolant system power 0.1 kW
Total power 3.0 kW
Power supply voltage 400 V
Dimensions (W × D × H) 2200 × 1400 × 2050 mm
Weight 730 kg
Listing
Siedlce
2,045 km
Surface Grindinding Machine 540x250mm
CORMAK540x250 semi-automatic
Call
Condition: new, Year of construction: 2025, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display.
Description
Double V-shaped guide
Hydraulic feed in 2 axes
Tempered and precisely ground linear feeding guides
Central lubrication of guides
Digital display
Sturdy design
High machining accuracy
Technical data
TABLE DIMENSIONS 500 x 250 mm
CROSS / LONGITUDINAL FEED 260 x 560 mm
MAX. GRINDING SURFACE 540 x 240 mm
MAX. DISTANCE FROM TABLE TO SPINDLE CENTERLINE 490 mm
Bwedpfx Ajkkcm Uefneh
TABLE RUNNERS DOUBLE GUIDE
CROSSWEEP PER 1 DIVISION OF NONIA SCALE 0.02 mm
CROSSMOUNT PER 1 TURN OF THE WHEEL 2.5mm
VERTICAL SHIFT PER 1 DIVISION OF NONIA SCALE 0.01 mm
MANUAL VERTICAL FEED VOLUME PER ROTATION 1.25mm
WHEEL DIMENSIONS 200 x 20 x 32 mm
WHEEL ROTATION 2850 rpm
MAIN MOTOR POWER 1.5 kW
OIL TANK CAPACITY 80 L
HYDRAULIC PUMP MOTOR POWER 1.5 kW
ENGINE POWER FOR COOLANT PUMP 40 W
DIMENSIONS 1800 x 1400 x 1800 mm
WEIGHT 900 kg
Optional equipment, dependent on the model (inquire with the sales rep)
Magnetic table
Chips separator with a magnetic filter
Grinding wheel
Grinding wheel fixture
Cooling system
Halogen lighting
User manual
EC declaration of conformity
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Siedlce
2,045 km
Surface Grindinding Machine 800x400mm
CORMAK800x400 semi-automatic
Call
Condition: new, Year of construction: 2025, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display.
Description
Double V-shaped guide
Hydraulic feed in 2 axes
Tempered and precisely ground linear feeding guides
Central lubrication of guides
Digital display
Sturdy design
High machining accuracy
Technical data
Table dimensions 800×400 mm
Maximum table feed 800×415 mm
Distance from table surface to spindle axis 600 mm
Table mounting T-slot 1×14 mm
Table longitudinal speed 3–20 m/min
Rapid vertical feed speed 360 mm/min
Transverse travel equal to 1 grade on the vernier scale 0.01 mm
Transverse travel equal to 1 wheel turn 2 mm
Transverse feed addition 0–8 mm/min
Transverse feed 600 mm/min
Grinding wheel dimensions 300×30×76.2 mm
Bwodskkddvopfx Afnoh
Grinding wheel speed 2850 rpm
Manual vertical travel equal to 1 grade on the vernier scale 0.01 mm
Grinding accuracy 300:0.005 mm
Grinding roughness Ra 0.32
Manual vertical travel for rotating 2 mm
Main motor power 2.2 kW
Flood coolant pump motor power 40 W
Dimensions 1960×1480×1850
Weight 1800 kg
Equipment dependent on the model
Magnetic table
Grinding wheel
Grinding wheel fixture
Cooling system
Halogen lighting
User manual
EC declaration of conformity
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Siedlce
2,045 km
Semi-automatic band saw 450mm
CORMAKS-440R przecinarka taśmowa do metalu
Call
Condition: new, Year of construction: 2025, Semi-automatic CORMAK S440R band saw. Its arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm.
Machine features
Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine's arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm.
Technical data
Bwjdpfxoi Dx R No Afnjh
Minimum cutting diameter Ø 5 mm
Minimum material length in vice 30 mm
Vice base from ground distance 780 mm
Cutting band dimensions 5200×34×1.1 mm
Total power 4.4 kW
Band speed 20/90 m/min
Dimensions (L×W×H) 2500×1900×1450 mm
Weight 1100 kg
Max. cutting range [mm]
Angle
0º ø450 620×440 610×440 450×450
45º R ø440 500×190 360×440 420×420
45º L ø440 510×180 460×390 390×390
60º R ø330 330×170 170×440 300×300
60º L ø350 350×170 330×310 310×310
Standard equipment
PLC controller
Semi-automatic operating cycle
Control console on a separate component
Control panel with an LCD display
Built-in hydraulic unit
Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control
Arm position memory function (arm returns to a defined height after cutting)
Hydraulically controlled vice's jaws (long stroke cylinder with position memory)
Cutting at angles of L/R 60o – 45o – 0o – 45o – 60o
Digitally displayed set cutting angle
Smooth band speed adjustability (inverter)
Powered brush for cleaning the band
Cooling system
Bi-metal saw blade
EC Declaration of Conformity
User manual
For more information please visit our web page or contact us.
Listing
Siedlce
2,045 km
Semi-automatic band saw machine 250mm
CORMAKS-200RH przecinarka taśmowa do metalu
Call
Condition: new, Year of construction: 2025, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles.
Product features
CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision.
The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services.
Technical data
Type - semi-automatic
Arm raising and lowering - hydraulic with smooth arm lowering control
Band speed - 36/70 mm/min
Angled cutting - left to 45°, right to 60°
Vice - hydraulic
Minimum cutting diameter - Ø 5 mm
Minimum material length in vice - 30 mm
Vice base height - 780 mm
Cutting band dimensions - 27×0.9×2910 mm
Total power - 2.1 kW
Dimensions (LxWxH) - 1600×800×1400 mm
Weight - 530 kg
Angle
0º -----ø250 320×240 240×240
45º L ø200 220×120 190×190
45º P ø220 235×120 210×210
60º P ø110 155×110 100×100
Bsdsi D D A Sjpfx Afnswh
Default equipment
Control panel on separate component
Built-in hydraulic unit
Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control
Arm position memory function (arm returns to a defined height after cutting)
Cutting at angles of L/R 45° - 0° - 45° - 60°
Brush for cleaning band
Cooling system
Bi-metal band saw
EC Declaration of Conformity
User manual
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Trust Seal
Dealers certified through Machineseeker

Listing
Polska
1,845 km
Fully Automatic Thermal Film Laminator
Wenzhou Guangming Printing Machinery Co.SWAFM 1050
Call
Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition.
Bwedovkg H Tepfx Afneh
The machine in continuous operation – test and presentation possible.
Availability: January 2025
Location: European Union
Machine imported, installed, and under service care by the official GMB distributor.
Only one user.
The best-selling model of GMB's automatic laminator.
A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.
Automatic Pallet Feeder
Front and side-lay margin control
Touchscreen controller
Large diameter chrome-plated calender
Electromagnetic heating – rapid heating within 90 seconds
Stable operating temperature
Hydraulic pressure
Pneumatic sheet separation unit
Anti-curl bar
Automatic high-capacity stacker – pallet-based output
MODEL: SWAFM-1050
Max Sheet Size: 1050 x 820 mm
Min Sheet Size: 300 x 300 mm
Laminating Speed: 65 m/min
Paper Thickness: 105 – 500 g/m2
Gross Power: 35 kW
Total Weight: ok. 3000 kg
Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm
Pressure system: Hydraulic
Max. pressure in hydraulic system: 8 MPa
Listing
Vincennes
901 km
Semi-automatic bread slicer
JACBEl380/9
Call
Condition: excellent (used), -Dimensions: 570x740x11160mm
-Serial number: 01215501
-Model: BEl380/9
-Year: 01/2008
-Total cutting width: 40 cm
-Voltage: 240V
-Power: 0.37kW
-Weight: 140kg
-The equipment is prepared upon order; collection and return times are agreed at that moment.
Bedpfxowx Rk Do Afnewh
-The listing was translated automatically. Translation errors are possible.
Listing
Debrecen
2,200 km
Semi-automatic press machine
COMECPCV180
Call
Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures.
Bwsdox Tg Dijpfx Afnsh
Listing
Barcin
1,740 km
Semi automatic granules packing machine
Call
Year of construction: 2025, condition: new, Equipment: CE marking, The granules filling packaging machine can filling the granules materials, such as beans, rice, sugar,almonds and other granular materials
Filling capacity: 5-5000g
Filling speed: 400-600 bags/hour(Base on 1kg)
Bwedpfx Afoxyiz Ieneh
Material: Food grade 304SS
Power: 1.5KW
Voltage: 220V 50HZ Single phase
We make it easier for you to find: "semi automatic flute laminator"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Semi Automatic Flute Laminator (27,812)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
- Automatic Cnc Lathe
- Automatic Die Cutter
- Automatic Flatbed Die Cutter
- Automatic Flute Laminator
- Automatic Folder Gluer
- Automatic Gluing Machine
- Automatic L Sealer
- Automatic Lathe
- Board Laminator
This may be of interest to you



































































































































































