Used Self Propelled for sale (2,181)

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Laedpfx Aszlbqrokwsh Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: excellent (used), operating hours: 524 h, fuel type: hybrid, color: red, General information Year of manufacture: 2021 Drivetrain Drive: Track Weights Empty weight: 2.895 kg Functional Lifting capacity: 300 kg Working height: 1.000 cm Dimensions of cargo space: 226 x 146 x 208 cm CE mark: yes Lsdpfx Akextn Dzewjah Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: IT Surface type: Rough terrain Additional information Please contact Vink Machinery for more information AlmaCrawler BIBI 1090-BL EVO * 2021 * 524 working hours * Diesel and 230-volt drive * 10-meter working height * Self-leveling * 300 kg lifting capacity * 2895 kg net weight * Documents included

Condition: good (used), Year of construction: 1990, operating hours: 16,400 h, AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Lodpfx Akenzhx Hsweah Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: used, axle configuration: 3 axles, first registration: 03/2021, suspension: air, tire size: 245/70R17.5, color: grey, Equipment: ABS, = Additional Options and Accessories = - Toolbox = Notes = 1 x self-tracking axle / trailing arm steering. Hydraulic bed. Hydraulic ramps. Wideners. = Additional Information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; tire tread depth left inner: 10%; tire tread depth left outer: 10%; tire tread depth right inner: 10%; tire tread depth right outer: 10% Rear axle 2: Dual tires; tire tread depth left inner: 40%; tire tread depth left outer: 40%; tire tread depth right inner: 40%; tire tread depth right outer: 40% Laedpjz S Attefx Akwoh Rear axle 3: Dual tires; tire tread depth left inner: 15%; tire tread depth left outer: 15%; tire tread depth right inner: 15%; tire tread depth right outer: 15% Weights Unladen weight: 12,700 kg Payload: 35,300 kg GVW: 48,000 kg Identification Model number: OSDS-48-03 / HYDR BED - HYDR RAM = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) / Wouter Greutink (NL-DE-GB-ES-IT) / Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: Ljde Aa I E Aopfx Akwsah W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement Lasdpfeyltv Ujx Akwsh 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: used, empty load weight: 10,680 kg, maximum load weight: 53,000 kg, axle configuration: 3 axles, first registration: 04/2020, total length: 20,500 mm, total height: 1,400 mm, suspension: air, load capacity: 42,320 kg, • 1st axle liftable • 3rd axle self-steering • Deck width 2.40 m • Platform height 1.40 m • Platform length 13.30 m • Extendable to 20.50 m • Storage box • Long mesh rack • Water tank • Convoy kit • 10 lashing rings • WABCO SmartBoard Ljdpfx Akj Aa U Spowsah • 20 aluminium stanchions on request

Condition: used, Masterflex MF 07525-40 L/S Digital Miniflex Pump, Peristaltic Pump *New price: €3,308 This compact, stackable pump features a robust ABS housing that is easy to wipe clean and keep tidy. The Miniflex pump head has a large occlusion angle that prevents fluid backflow up to the hose’s rated pressure. Self-lubricating rollers made of thermoplastic polyester are low-friction and durable, ensuring smooth operation and a long service life. L/S series Type L/S Miniflex Pump head not interchangeable Number of mountable heads: 1 Channels: 2 Rollers: 3 Flow rate min: 0.008 ml/min up to max: 324 ml/min Hose ID from 0.8 mm up to 3.2 mm Can be used as a metering pump: Yes Calibratable: Yes Interface: Analog (D-Sub 25-pin, w) Operation: Foil keypad with LCD display Housing material: ABS plastic, aluminum and vinyl Protection class: IP 33 Motor: Brushless motor Motor speed min: 0.1 rpm up to max: 300 rpm Reversible direction: Yes Open-Head Sensor: Yes Cloud Connected: No Anti-Drip: Yes Ljdpfx Akstt Dxdewsah Dimensions: 238 × 140 × 157 mm (L x W x H) Condition: Used You can find more laboratory equipment – new and used – in our shop! International shipping costs available upon request!

Condition: new, empty load weight: 8,775 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, total length: 20,500 mm, suspension: air, load capacity: 33,225 kg, • Extendable to 20.50m • Locking mechanism every 1000mm Lodpfx Akj Abafkowoah • 12 twist locks • 1x20’, 2x20’, 30’, 40’ containers • BAWER toolbox with 3 compartments • Full LED lights • Coupler height 1170mm • Platform width 1.60m • Convoy kit • 16 steel posts, 1.60m • Wooden floor with steel omega profiles • Perforated UPN 160 edge • 1st axle liftable • 3rd axle self-steering • Smartboard • LED work lights • Spare wheel • PVC toolbox • Lashing rings

Condition: good (used), Year of construction: 2019, functionality: fully functional, total width: 1,200 mm, total length: 600 mm, total height: 2,050 mm, overall weight: 400 kg, Düperthal hazardous materials cabinet, model FWF 90 We offer a hazardous materials cabinet from the FWF 90 category, featuring self-closing doors and connections for exhaust systems. Lsdpfx Akszhrkhowjah The cabinet is in good working order.

Condition: used, empty load weight: 5,720 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2019, suspension: air, tire condition: 30 %, load capacity: 36,280 kg, • Multi-position 20’, 30’, 40’, 45’ • Extendable front and rear • Pneumatic unlocking • Pneumatic rear sliding extension • Storage box • Disc brakes Ljdpfe Aa U Ttox Akweah • First axle liftable • Third axle self-steering

Condition: new, empty load weight: 12,040 kg, maximum load weight: 71,000 kg, axle configuration: > 3 axles, first registration: 06/2025, suspension: air, load capacity: 58,960 kg, • 24V hydraulic power pack • Width extensions • Loading platform 8.90 m • Gooseneck 3.45 m, straight section • Width from 2.53 to 3.00 m • Deck height 0.90 m • Beveled rear section • Hydraulic ramps 3 m x 0.90 m • 14 lashing rings • Coupling height 1350 mm • Smartboard • LED lights Lodpfxs Abaabe Akweah • 1st axle liftable • 3rd and 4th axle self-steering • Drum brakes • Convoy kit • Length 12.65 m

Condition: used, empty load weight: 5,540 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2012, total length: 7,900 mm, total width: 2,450 mm, total height: 1,300 mm, suspension: air, tire condition: 60 %, load capacity: 33,460 kg, • Volume: 25 m3 • First axle is liftable • 2 hatches • PVC storage compartment Lsdj Abadaspfx Akwjah • Manual CRAMARO tarpaulin • Towing hitch • Self-leveling suspension • Interior dimensions: 7.90 x 2.45 x 1.30 m

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Laedpfx Akez A Hh Ueweh

Condition: used, Used Suncombe SteriWasher 1500 GMP parts washer, year 2016, only approx. 170 operating hours, very good condition, available immediately. Validatable cleaning of production parts, mixing vessels, drums, IBCs, change parts and tools for pharma, biotech, food, cosmetics and chemicals. EQUIPMENT • Wash chamber approx. 1,500 x 1,500 x 1,500 mm in 316L stainless steel, crevice-free, radiused corners, sloped floor • Automatically locking hinged door with inflatable door seal • Removable racks, loading via mobile trolleys • Combined spray technology (high-impact wash and rinse), chemical dosing • Programs: pre-rinse, wash, rinse, final rinse, air drying, self-CIP • Recipe control with HMI, user levels, process monitoring; designed to cGMP, EHEDG, ASME BPE, GAMP HANDLING Laodpfx Akeyf N Imjwoh • Dismantling and packing free of charge • Worldwide shipping possible (e.g. DAP) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, functionality: fully functional, fuel type: diesel, axle configuration: 4x4, fuel: diesel, Year of construction: 2025, TLF 3000 All-Wheel Drive on Off-Road Renault D14 4x4 Chassis Chassis • Renault D14 4x4 EURO 6 with 285 HP (210 kW) • Manual transmission • Single tires with matching track and off-road tread for maximum traction on challenging terrain • Front winch available on request Cab • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 BA holders in the crew compartment • Optional fold-out emergency exit from the crew compartment Body • High-quality, frame-type superstructure made from rust- and corrosion-free materials • 3 flexible and spacious equipment compartments per vehicle side • Swing walls for maximum storage space • Fold-out steps for each side equipment compartment • Customised stainless steel equipment mounts • Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank • Maintenance-free combined normal-/high-pressure pump TITAN S20HP FPN 2000-10 • Suitable for pump & roll operation • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, steplessly adjustable foam proportioning system • Water tank: 3,000 l with integrated foam tank: 300 l • Additional heater in the pump compartment Firefighting Equipment • High-pressure quick attack with 50 m of form-stable hose • Foam/water monitor on vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting • LED light bar on vehicle roof/2 LED front flashers • Additional blue light elements on the body • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Reversing camera • Continuous contour marking according to ECE-R104 • Comprehensive LED lighting in all crew and equipment compartments • LED scene lighting on the body and additional spotlights • Pneumatic LED light mast with remote control Ljdpfeyzcqhox Akweah • Folding underride guard, also serves as pump step • Optional hygiene board • Optional rear warning markings We will be pleased to provide you with a detailed quotation and comprehensive information about the vehicle. Note: All information is provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. Pictures may show special equipment. This is not an offer, but information only. Subject to prior sale!

Condition: used, functionality: fully functional, Equipment: compressor, MB Bäuerle Setmatic Fold CAS 52 folding machine with adhesive unit for self-mailers. Fully functional and from current production. Includes adhesive unit for self-mailers and a compressor in new condition. Further technical details will be added. Lajdpfx Ae Adthwokweh

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Lsdpexzu Ehefx Akweah • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Lasdpfx Ajxl Ab Sjkweh Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Year of construction: 2022, condition: used, Weber CR 9 MDM Hatz-Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling Price: €9,990.00 net / €11,888.10 gross Technical Data Engine: Hatz Diesel Maximum Engine Power: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal Force: 100 kN Frequency: 65 Hz Working Width: 75 cm The reversible soil compactors of the CR series stand out with their high compaction performance and maximum efficiency. They are therefore the first choice for compaction work, from classic road and civil engineering to paving. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operating comfort. - Precise, stepless, electro-hydraulic switching between forward and reverse operation via a toggle switch - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handle - Protection of the machine and engine by means of a protective frame and full engine cover - Reduced maintenance effort thanks to the self-adjusting centrifugal clutch Ledpjznrtijfx Akwsah - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable crane eye - Secure lashing for transport thanks to additional eyelets in the engine console - Higher operating comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Application areas: road and civil engineering, trench construction, garden and landscaping, sub-base for paved areas, compaction of paving and compaction of sand, gravel or scree We have a very large selection of various vibratory plates in our warehouse that are immediately available! Simply contact us for this at . Upon request, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Weber MT program! Errors and prior sale excepted! Internal No.: 071417 = Further Information = Year of Manufacture: 2022 New: Yes Unladen Weight: 740 kg Engine Brand: Hatz Please contact Marius Herden for further information.

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a node plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard info center, electronic brake wear indicator BVA, readable in the central control unit (display). 1st axle with starting aid (new EC regulation, without central control unit control). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x20 tons support load with swivel foot. Ljdpfx Akj Adxgxswsah Braking System: According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator. Spring brake system acting on two axles, operated at the rear. Aluminum air tank system. Electrical System: According to EC standard 91/633 and 97/28, with 2 five-chamber lights, Aspöck Europoint type, integrated into the aluminum rear panel. 24-volt system with 1x15-pin and 2x7-pin socket. Side marker lights in LED design, 2 reflective panels on the rear. Position lights at the front: 2x white, at the rear: 2x red. 2 separate LED reversing lights integrated into the U-profile. Body/Container: Body internally fully welded. Reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum container. Side walls: 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with upper and lower belt. Plank profiles internally fully welded. Floor laid as a sliding floor system on 140 mm aluminum cross members. Floor stacking load approx. 9 tons/m2. Cross members mounted closely together (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings. Doors secured in the open position with one chain each. Retractable end-of-stroke wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet sealing. Aluminum wear plates on the sides and rear, approx. 2,000x1,500x4 mm. Service door in the front wall. Hydraulic System: "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders, plus anti-lifting slide bearings, type CF 10 mm. Ribbed floor design. Hydraulic system with approx. 200 mm working stroke. Fixed parts, type "Faster". Line size NW 21. Fixed parts with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with wireless remote control integrated into a lockable, watertight box. Sliding floor rotated / wear corners at the floor end, new. Accessories: 6 PVC mudguards with 2 anti-splash mud flaps. 6 PVC splash guards above th

Condition: used, Year of construction: 1996, Pallet dimensions 1 (wood): 1200x800mm, pallet dimensions 2 (wood): 1000x1000mm, packaging type: paper bags, max. throughput capacity: 400bags/h, support frame height (including support frame): 2000mm, installed power: 15kW, average power consumption: 9kW, mains voltage: 380V/50Hz, air consumption: 100Nl/min (dry and filtered), air pressure: 6kg/cm², motor protection rating: IP54, electrical protection rating: IP54, equipment: SEW gear motors, SEW self-braking motors, Herion solenoid valves, Herion pneumatic cylinders, Siemens electrical power components, Siemens contactors, Siemens push buttons, Siemens S5 PLC, Soprel frequency inverter, Klöckner safety limit switches, IFM proximity sensors, IFM photoelectric sensors, permanently lubricated rollers, waterproof, with documentation. An on-site inspection is possible. Lasdpfxoz S Iv Ts Akwoh

Condition: used, functionality: fully functional, Year of construction: 2018, stroke length: 250 mm, overall weight: 17,500 kg, power: 26 kW (35.35 HP), input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, pressing force: 250 t, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Bystronic Xpert Pro 250/3100 press brake, manufactured in 2018. Model: Xpert Pro 250/3100 Year of manufacture: 2018 Serial number: BY041049 Working length: 3100 mm Maximum pressing force: 2500 kN Maximum stroke: 250 mm Weight: 17500 kg Main motor power: 22 kW Total connected load: 26 kW Operating voltage: 3-phase 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current of the upstream fuse: 80 A Maximum pneumatic operating pressure: 8 bar Maximum hydraulic operating pressure: 310 bar Self-assembly and ex works. If you have any questions or require further information, please do not hesitate to contact us. Lajdps Adt S Njfx Akweh

Condition: like new (used), Grundfos NB65-250/254 Centrifugal volute pump Laodpfo Ad Rgqox Akwoh Unused in box, Single stage non self priming centrifugal volute end suction pump, 5.5Kw, 1470 RMP, flow rate 69.5 m3h, 3Ph

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Lasdpfez Iyvpsx Akwjh