Used Self Aligning Ball Bearing for sale (7,889)

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter Bodpfx Aoi Am Ukjfmjww 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. Bwedpfx Asyrqpfofmow The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: like new (used), Manufacturer: IBC Wälzlager Type: ARTB 200 Design: Axial-radial bearing Inner diameter: 200 mm Outer diameter: 300 mm Width: 45 mm Item number: 221691 Drawing number: 90210001802 Bwodjyryfcjpfx Afmjw Marking: 13SS1R Partially unpacked for photography – unused item from warehouse clearance.

Condition: used, maximum load weight: 14,740 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, next inspection (TÜV): 11/2028, Year of construction: 2017, Internal vehicle number: G300411 Available immediately at our location in Kaufungen. For more information, please contact: Bedsykf Ugspfx Afmsww * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,260 kg Subject to errors and omissions. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm Bsdpfx Aswx Dctjfmoww * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Bwjdpfx Ajwhtc Isfmsw Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2025, condition: used, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Bjdpfxjwk Dv Do Afmeww Technical details, equipment, photos, and operating time are shown in the attached description.

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Bsdpfx Aowk E Uuefmsww Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Type: PROFIBUS I/O module Model: BNIPBS-302-000-Z001 Order number: BNI000A Communication interface: PROFIBUS DP Digital inputs: 16 Digital outputs: 16 Bedpfx Ajzcw Ebsfmsww Sensor/actuator connection: M12 Protection rating: IP67 Design: Fieldbus module for decentralized installation Application area: Industrial automation technology Mounting type: Machine and system mounting Quantity available: 6 units

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. Bwjdpfezbrkcox Afmjw -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Condition: used, Cam switch assembly with 6 switching tracks, tool monitoring, process monitoring Bsdpfx Afey Sbw Uemjww BALLUFF type BSW 493-6 K3 /06 Year of manufacture: 1988 Number of cam switches: 6 Switching voltage: 230 Volts Switching current: 6 A Drive shaft: Ø 20 mm with 6 mm key - 6 mechanical cam switches BALLUFF - Cam length adjustable - Adjustment tool missing Enclosure dimensions (L x W x H): 240 x 185 x 140 mm Weight: 6.3 kg Good condition

Condition: used, Mobiles Schwertfalzwerk mit Eigensteuerung / Mobile Knife Folding Unit with SelfControl MBO Z2 Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z2 Year 1995 - Serial-No. 44951206-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Bjdjy A S Ekspfx Afmsww Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 15.000 cycles/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Balluff BTL7-E100-M0100-B-S32 Magnetostrictive Position Measuring System BTL06YL, unused, 100% functional, scope of delivery as per photos. Bedpfx Aey Rci Ajfmsww

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Bwedszd Eynepfx Afmow Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 201 S PVC ORTA KAYIT ALIŞTIRMA ( SERİ BIÇAK DEĞİŞTİRMELİ), • Robust mechanical structure capable of processing PVC profiles with high precision • Intermediate profile adjustment for PVC profiles within an angle range of -45 / +45 degrees • Easy blade set replacement system Bwodpfxozd Nyfj Afmew • Easy angle adjustment with mechanical supports • Adjustable support system for all types and brands of profiles • Cutting speed adjustment with a hydropneumatic system • Blade storage rack (for 3 blades) • Max. processing diameter: 160 mm • Max. blade size: 200 mm • Min: 90 mm

Condition: new, Manufacturer: IBC roller bearings Bwsdszd Rc Iepfx Afmsw Type: ARTB 200 Design: Axial-radial bearing Inner diameter: 200 mm Outer diameter: 300 mm Width: 45 mm Article number: 221691 Drawing number: 90210001802 Marking: 13SS1R unused, original packaging

Condition: new, Ball screw drive Dm63x20 Bedezd Rdfepfx Afmoww Stroke 1000mm Steinmeyer Quantity: 2 pieces Unused item from warehouse clearance.

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Useful stroke: 800 mm Overall height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Unit placement: integrated in the lifting table Bwsdpfok E Hmtox Afmsw Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 10/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Bsdpfjk E Tdaex Afmeww Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next Bedpelht Hzofx Afmjww With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: used, mileage: 1,054,044 km, power: 353 kW (479.95 HP), first registration: 02/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, emission class: euro4, loading space length: 5,650 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, all wheel drive, * Man Tga 26.480 6x4H - 2BL Hydrodrive All-Wheel Drive 4x4 * Flatbed with tarpaulin and wooden side rails * Air conditioning * Manual transmission * Auxiliary heater * Detachable crane mounting * 6-speed retarder * 2 beds * Electric windows * Electrically adjustable mirrors * Trailing axle / with articulated axle * VIN: WMAH35ZZ38L050607 Bwjdpfx Aekq Ap Tofmsw * Engine type: D2676LF05 * kW: 353 * Euro 4 * Displacement: 12419 ccm * Tare weight: 14580 kg * Payload: 11345 kg * Gross vehicle weight: 26000 kg * Wheelbase: 4500 / 1300 mm * Internal body length: 5.65 m * Internal length with tailgate open: 6.40 m * Internal body width: 2.45 m * Internal body height: 2.70 m * Vehicle length: 9250 mm * Vehicle width: 2550 mm * Vehicle height: 4000 mm * Tires: 385 / 65 R 22.5 * Price (net) Tel./WhatsApp:

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Bjdpokvnuujfx Afmsww Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Roll-Off Container Trailer * High-tensile steel welded chassis construction * Two longitudinal beams with cross members * Top surface of the longitudinal beams designed as wear-resistant container roller tracks * Rear loading with integrated loading ramp * Suitable for roll-off containers with lengths of 6.5 m and 7.0 m * Container locking system: * 2 pairs of recessed locking hooks integrated into the chassis * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for transporting roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles with 430 mm brake disc diameter * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension * Raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: * Opening the container locking system automatically activates the spring-loaded parking brake * Electronic Stability Program (Vehicle Stability Control System) * Duomatic air coupling * EBS (Electronic Braking System) with front EBS connector and connecting cable Bwedpfx Afsi Ri Nmjmew Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red rear outline marker lights * 1 x 15-pin front connector * 2 additional LED work lights at the rear, activated automatically when reverse gear is engaged ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised including passivation treatment * 15-year warranty against perforation corrosion * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit, used, in good condition, 100% functional. Bwjdpfsi D T D Djx Afmsw

Condition: ready for operation (used), Balluff BIS C-620ST2-S Evaluation Unit, Software/Hardware Version 1.3, used, 100% functional. Bedpfx Aji D T D Iofmjww