Used Seam Welding Machine for sale (65,301)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Bodpsykvdlsfx Aafedc Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: refurbished (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, machine/vehicle number: P.TE 1-350, total width: 700 mm, total length: 900 mm, total height: 600 mm, warranty duration: 12 months, length of welding knife: 400 mm, width of welding knife: 10 mm, High frequency welding machine THF producer, reviewed by Cebb HF Technology in 2026 35cm of arm Bdedpfx Asy Nkibjafsc 2KW of power Welding electrode 400x10mm Possibility of welding with small additional shaped electrodes Dimensions 700x900xH600 to be placed on top of a table original plexiglass shielding 12 months warranty

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller Bdodpfx Aajxacilsfsc pairs - Adjustable upper shaft

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds Bedpsxachzsfx Aafsdc - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW Bodpfx Aaexaaf Rsfjdc weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Bdedpfxjxaaw Ho Aafsc Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Insertable welding controller in 19" housing, type NPS 8043-1 IQ1, with quality assurance and 50 programs. Solenoid valve voltage: 24 V DC. Complete with MB 260 current measuring strap. ADDITIONAL CONTROLLER MODULES IN STOCK: e.g. 8036 - 8036-S3, 8033, 8043, MPS 200 R1, RATIA 43a, HWS 2202 Profil IQ. Bjdjdga Nbopfx Aafjdc

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE Bodpfxswbknbe Aafjdc A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Bdedpot Awm Djfx Aafsc Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Series : B20 Bdjdpsy A Hnmefx Aafsc .

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. • Cleans and passivates in a single operation Bsdpsyx Sq Esfx Aafedc • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. Bedpfsh N Sd Uox Aafedc - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm Bedpsyu R Elofx Aafodc - maximum welding length: 2600 mm - support arms - PLC controller

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Bdsdpfxsy Rkuyo Aafec

Condition: used, Year of construction: 2022, Technical details: current intensivity: 9 A total power requirement: 5 kW weight of the machine ca.: 0,08 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 21 cooling type: AF l Bdedpsynhw Ssfx Aafjc Burner connection: EURO-Zentralanschluss

Condition: used, Year of construction: 2018, Technical details: current intensivity: 14 A total power requirement: 8 kW weight of the machine ca.: 0,14 t voltage: 3x 400 V : 50/60 Hz Bsdpfx Aoynhizjafjdc Protection class: IP 23 welding current: 25-400 A switching steps: 14

Condition: used, Year of construction: 2017, Technical details: current intensivity: 6 A Bdedpfx Aoym Ur Hsafoc total power requirement: 3 kW weight of the machine ca.: 0,07 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 21 welding current: 25-200 A cooling type: AF

Condition: used, Technical details: current intensivity: 16 A total power requirement: 9 kW weight of the machine ca.: 0,032 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 23 Welding process: MIG MAG Elektrode Energy control : stufenlos an der Anlage, am TEDAC-Brenner Bdedsym Umwspfx Aafec Adjustable parameters: Drosselwirkung, Drahtrückbrand, Zündvorschub

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Bedpfsy Tqwyex Aafodc Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 9.900 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel Bdedsxf Hv Hepfx Aafsc - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate Bedpshwn Tusfx Aafodc - milled surface - 4 bolted lifting lugs - plate with several symmetrical holes Net weight 3400 kg

Condition: used, Straightening and welding plate, steel Milled steel plate with a good surface finish, heavy-duty straightening plate Length 1900 mm Width 1500 mm Thickness 70 mm throughout - machined surface, milled finish Bodpfx Aedzqr Rsafjdc - plate equipped with several symmetrical holes Weight approx. 1600 kg good condition Height-adjustable cast steel feet can be found in our shop

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg Bdjdedzql Sepfx Aafoc The welding test shows good results when welding stainless steel with DC and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug Bedpfxsdzqb Eo Aafodc - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Bdodpfx Aaoi E Iz Isfoc Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock