Used Screw for sale (5,434)

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Todeud Iwzspfx Akisd Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: used, Manufacturer: PFAFF Type: HSE63 Max. lifting force: 50 kN Max. tension: 50 kN Screw torque at max. lifting force: 190 Nm Max. permit. torque on the drive shaft: 168 Nm Screw: M16 Tedpfsugty Hox Akied Worm gear with oil lubrication Oil amount: 0.7 l Hub: 850mm The indicated price refers to 1 piece.

Year of construction: 2012, condition: excellent (used), Carlyle/Carrier Screw Compressor 400/3/50hz Displ.: 504m3/h. Cooling agent: R134a electr.Cap. 93KW Todpfjfmmrbsx Akijd with receiver

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Condition: very good Delivery time: available from stock Tjdpfx Akjd Rafbjijd

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 Todped Sg Hcefx Akijd 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg Tsdefngxbepfx Akijd

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet Tedpel I Dx Nofx Akiod incl. 7 unused spare coils

Condition: good (used), in total 8 pieces available 1 x NETZSCH Nemo NM015BY01, year: 1998 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 1 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW Tedolhr Hfjpfx Akisd 1 x SEEPEX BN025, HEW gearbox + motor 0,37 kW, year: 1992

Condition: good (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm Todpfxscp Anms Akisd -Thread pitch: 30 mm -Total length: 2285 mm -Weight: 34 kg

Year of construction: 2008, condition: used, York Screw compressor with flanged motor Cooling agent: R134A could be used for R717 Amonia motor data: 165KW/225HP at 3000rpm Y400V/50hz Todpfxscrqmrs Akiod

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 COMPRESSOR, 5.2 m3, 2019 Tedpfordf Swox Akied DIESEL compressor ATLAS COPCO XAS 88, fully serviced Technical specifications: capacity: 5.20 m3/min; operating pressure: 7 bar; year of manufacture: 2019; engine: KUBOTA operating hours: 1519 h!!! compressor in fully working order Below is a link to a video showing the machine in operation.

Condition: used, Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder Todpfxjt E D Nke Akiod -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 972.6 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Premium used Atlas Copco GA90 90 kW Tsdpfot E I D Ejx Akisd 7.5 bar 16.21 m3/min Only 11,118 operating hours!

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Tedpot Iwt Uofx Akijd reactions or questions ? please with full name, company name and phone number.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Todpfeiyx Uzjx Akiod 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Tsdpfx Ajdm Aghekiod grooved feeding bush, screw with shearing and mixing element

Condition: like new (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DD10059787001, overall weight: 4,000 kg, total length: 2,500 mm, total width: 1,400 mm, total height: 2,000 mm, power: 132 kW (179.47 HP), pressure (max.): 13 bar, type of cooling: air, New frequency-controlled machine with heat recovery. Conversion because the air requirement is no longer met. Todswhu U Espfx Akiod

Condition: excellent (used), functionality: fully functional, Screw-type blancher Internal dimensions: Ø 800 mm × 3000 mm Water level: 300 mm Screw width: 600 mm Overall dimensions: 4400 mm × 1100 mm × 950 mm The screw-type blancher is intended for thermal processing of food products by short-time immersion in hot water or steam. Its screw conveyor-based design ensures even and gentle movement of the product, which helps maintain its structure and color. Todpfx Aexq N Iiskisd

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling Tjdjx Dihcepfx Akijd - filter set with new inserts

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: Tjdpfjx Dkmgjx Akiod This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Todpfx Akoxbtk Neijd Energy efficient VSD machine

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), volume flow: 0.74 m³/h, pressure (min.): 10 bar, Exhibition machine includes 2 x 90-liter pressure tanks / galvanized includes refrigerant dryer includes automatic condensate drain includes oil-water separator includes microfilter includes sub-microfilter Rated power 5.5 kW Delivery rate at 10 bar: 0.74 m³/h Dimensions (W x D x H): 980 x 755 x 1257 mm approx. 300 kg Todpfx Aoxq Elwjkisd

Condition: good (used), Transport hooks / screw lifting clamps / lifting claws from the company J.D.T. - 1 ton / 6 ton / 17 ton / 17 ton. Todpfx Aeu U H Dnjkiod

Year of construction: 1999, condition: used, Manufacturer : Clextral Model : EVOLUM+ 53 Year : 1999 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire AC motor: 130 kW Tjdpfx Aeyy S Iyskied Length of screw : 2120 mm Screw elements: nominal diameter 53 mm. L/D : 40 Barrels : 10 units Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.) A wide range of applications: fish feed, pet food, snacks, meat substitutes…

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW 7.5 bar 16.87 m3/min Tjdpfjy A Nwksx Akisd Year of manufacture: 2015 Operating hours: 65,031