Used Scm Windor for sale (608)

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW Worktable: 1200 x 730 mm + extensions Worktable height: 920 mm Spindle tilt: -10° + 45° Max. spindle projection above table: 175 mm Spindle speeds: 3250/6500-5000/10000 rpm Max. tool diameter: 250 mm Weight: approx. 950 kg Storage location: Nattheim Ffedew Enw Iepfx Afnsu

Condition: new, Year of construction: 2024, functionality: fully functional, Powerful and versatile panel saw packed with extra features Sliding table with 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for fast, precise positioning for angle cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with integrated dust extraction Ø 80 mm - Automatic brake on the main blade - Lockable main switch for the control circuit (110 V) - Manual right-hand side guide with position reading via metric scale, running on Ø 40 mm steel tube, and with micrometric adjustment. Ffsdpfx Aeyglr Djfnju - Cutting capacity against parallel fence 1270 mm. Direct start of main motor - Three speeds for main blade - Scoring unit with independent motor and external setup and stop for quick repositioning of the scoring blade. The machine is compliant with CE standards. Additional features: - CompeX for angle cuts, integrated into the extension table, for quick conversion to angled cutting - Start/Stop switch on the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: new, Year of construction: 2024, functionality: fully functional, SCM Panel Saw, SI 400 EP NOVA with tilting blade and sliding table - “READY” electronic control with 2 controlled axes Fsdpfx Afsygll Rensfu Specification: - Lifting and tilting of the saw unit - Automatic height adjustment according to tilt angle - Manual, semi-automatic, and automatic with memory - Up to 99 programs - Calculator and hour meter - Tool data setting Optional equipment: - CompeX for mitre cuts, integrated in the sliding table for quick changeover to mitre cuts - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - 3rd LCD stop for crosscut fence

Condition: used, Year of construction: 2009, Empty weight: 2.400 kg Dimensions (LxBxH): 350 x 180 x 165 cm Motor lay-out: Ffsdpfjwnh Irox Afnou Under, 5,5 kW Right, 5,5 kW left, 5,5 kW Upper, 7,5 kW Under, no motor, but optional spindel - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: AA2/001125 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 400 - Current consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Saw blade diameter: max. 400 mm Ffodpfxsyc Rtrs Afnju Cutting length: max. 3,200 mm Tilting: 45° Scoring unit: Yes SCM format panel saw type SI 3200 N for precise longitudinal, cross, and angled cuts in solid wood, board materials, and laminated materials. The machine features a robust format sliding table, high repeat accuracy, and sturdy industrial construction with electronic adjustment and scoring unit. Ideal for carpentry workshops, joineries, and furniture manufacturing.

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Ffjdpsvhc E Hjfx Afnou Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Year of construction: 2020, condition: ready for operation (used), overall weight: 220 kg, spindle motor power: 5,000 W, spindle speed (max.): 10,000 rpm, This SCM Class TI120 C was manufactured in 2020. A robust woodworking milling machine featuring a spindle that tilts ±45° and offers speeds up to 10,000 rpm. It includes a manual adjustment with digital display for precision and a main motor power of 5 kW. Ideal for detailed wood milling tasks. Contact us for more information about this machine. • Table: 1200 × 810 mm • Spindle: • Tilt: ±45° • Length: 140 mm • Speed steps: 3000 / 4500 / 6000 / 7000 / 10,000 rpm • Maximum tool diameter: 250 mm • Height adjustment: Manual with digital display Fjdpoyarccofx Afnjfu • Tilt adjustment: Manual with digital display • Speed display: Digital • Motor: Main motor power 5 kW • Extraction system: • Main extraction port: 1 × Ø120 mm • Table extraction ports: 2 × Ø80 mm • Required air speed: 20 m/s • Air requirement: 1550 m³/h • Fence: Wood • Electrical: 400 V / 50 Hz / 3-phase • Noise level: 83.7 dB(A) • Safety: Motor protection switch Additional equipment • Band saw unit (additional): • Band guide wheel diameter: 400 mm • Band guide wheel speed: 980 rpm • Maximum cutting height: 400 mm • Maximum cutting width: 380 mm • Band length: 3835–3910 mm • Auxiliary table size: 620 × 450 mm • Table height: 890 mm (tilts up to 20° to the right) • Maximum saw blade size: 30 × 0.5 mm • Fence: Steel • Motor power: 1.5 kW • Saw blades included: 4 pcs

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display Ffsdpfx Afoyaqg Tjnsu • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: good (used), For sale is a nice jointer-thickness planer from SCM. The machine works flawlessly and can be inspected and tested on site. About the machine: - 410 mm planing width Fjdpfxoyfiaie Afnefu - 3-knife Tersa cutterhead - Motor brake - Tiltable fence - 240 mm planing height

Condition: good (used), Year of construction: 1993, functionality: fully functional, Four-sided planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4-knife cutterhead Feed rate: 7.5–25 m/min Planing width: 500 mm Planing height: 240 mm 2 rollers on the table Ffsdpfx Afoydda Usnou

Condition: used, Year of construction: 2003, Dimensions (LxBxH): 365 x 120 x 160 cm Four-sided planer SCM Compact P Year of construction 2003 Fedpfx Ajwnhtzefnefu Min/max working height 6/120mm Min/max working width 25/230mm Minimum input length is 450mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 120/165mm Input table length 2480mm Exclusive tools. Engines 1st Spindle - Under 5,5kW 2nd/3rd Spindle - Left/Right 7,5kW 4th Spindle - Above 7,5kW Dimensions 3600x1200x1500mm (LxWxH), Weight 1500kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 021918 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1 - Lubrication system: Automatic - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 12 - Transport dimensions: 3650mm x 1200mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, Used machine Fedpfx Asxllxaefnjfu Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Dimensions (LxWxH): 1200x80x1350 mm Fence jaws made of wood Including wood-based 3-roller power feed with stand With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fodpfxexy Tmne Afnjfu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,500 h, This 5-axis SCM Morbidelli M100 was manufactured in 2019. It features a large working area of 3110 × 1620 mm, 21 vertical and 12 horizontal spindles, and a maximum rotation speed of 8,000 rpm. The machine includes vacuum suction cups and has been used for approximately 1,500 hours. Consider the opportunity to buy this SCM Morbidelli M100 CNC Wood Machining Centre. Contact us for more information about this machine. • Machine Condition: Excellent, very little use • Configuration: 5-axis CNC machining centre • Working Area (X × Y): 3110 × 1620 mm • Vertical Spindles: 21 Fedpfsyab Axox Afnefu • Horizontal Spindles: 12 • Maximum Rotation Speed: 8000 rpm • Vacuum System: Including vacuum suction cups

Condition: ready for operation (used), Year of construction: 2019, This SCM Olimpic K560 edgebander was manufactured in 2019. It features a 7" touch screen display with Touch 7 electronic control, supports edging thickness from 0.4 to 3 mm, and handles panel thicknesses from 8 to 60 mm. The machine offers a feed speed of 12-14 m/min and includes a hot air edge banding system. Contact us for more information. • Machine Condition: Good condition • 7" touch screen display (16:9) with Touch 7 electronic control • Edging Thickness: 0.4 – 3 mm • Panel Thickness: 8 – 60 mm • Minimum Panel Length: 140 mm Ffsdpfx Aeyabq Aefnou • Minimum Panel Width: 100 mm • Feed Speed: 12 – 14 m/min • Hot Air Edge Banding System

Condition: ready for operation (used), Year of construction: 2019, This SCM E10 edgebander was manufactured in 2019. It features a 0.4 to 3 mm edgebanding thickness capacity and can handle panel heights from 8 to 80 mm. The machine supports minimum panel dimensions of 50 mm in width and 210 mm in length. It operates with two feed speeds of 4 and 8 m/min and a maximum temperature range of 140 to 220 degrees C. Installed motor power is 3.5 kW. Contact us for more information about this machine. • Edgebanding Thickness Capacity: 0.4 to 3 mm • Thickness of Edges with Shear Device: • (80 mm height) 0.4 to 1.5 mm • (50 mm height) 0.4 to 2.5 mm • (45 mm height) 0.4 to 3 mm • Panel Height Capacity: 8 to 80 mm • Edge Height: 10 to 83 mm • Minimum Panel Width: 50 mm • Minimum Panel Length: 210 mm • Minimum Internal Radius with 0.4 mm Edgebanding: • Concave: 25 mm • Convex: 5 mm • Feed Speeds: 4 and 8 m/min • Maximum Operating Temperature: 140 to 220 degrees C • Installed Motor Power: 35 kW Fodpfx Afsyabmkjnofu • Overall Dimensions: 39.37" x 29.13" x 43.3"

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz) Fodoyabkvjpfx Afnjfu

Condition: used, Year of construction: 2012, Available upon agreement Machine Design: Gantry-type stationary machine Machining size in X-direction: 3548 mm Machining size in Y-direction: 1350 mm Machining thickness (Z-axis): 160 mm Number of main spindles: 1 unit Main spindle power: 11 kW Main spindle speed: 1,200–20,000 rpm Clamping system: HSK-63 F Spindle cooling: liquid cooling Number of axes: 5 Tool changer: disc type Tool changer positions: 12 units Rear wall slotting unit: Yes Vertical drilling spindles - X-direction: 10 units Vertical drilling spindles - Y-direction: 8 units Vertical drilling spindle speed: 6,000 rpm Horizontal drilling spindles in X-direction: 2+2 units Horizontal drilling spindles in Y-direction: 2+2 units Horizontal drilling spindle speed: 6,000 rpm Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog DXF interface: Yes CD-ROM drive: Yes Table design: console table, tubeless Positioning system: cylinder stops for veneer Support arms: 6 units Fedsygm Dhspfx Afnjfu Suction cups: 18 units Traversing rails: 4 units Number of vacuum pumps: 1 unit Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety fence left: Yes Safety fence right: Yes Safety fence rear: Yes Extraction hood: axis-controlled Setup assistance: laser point positioning aid Safety features: bumper Central lubrication: automatic Tools: available at extra cost Approx. weight: 6,500 kg Extraction diameter: 200 mm Further descriptions and images available upon request Location:

Condition: excellent (used), Stock number: 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Bottom horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Top horizontal 240 mm, 7.5 kW 5) Top horizontal 240 mm, 5.5 kW (spindles 4 and 5 are electrically adjustable up/down) 6) Bottom horizontal 240 mm, 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm Feed system: Fodpfoyh N Ayex Afnjfu • From above: - 8 driven, geared steel feed rollers (including 3 double rollers) - 4 driven, smooth rubber outfeed rollers (including 2 double rollers) • From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Infinitely variable feed speed controlled by inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Feed via Cardan shaft rollers - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2,480 mm - Pneumatic opening/closing of safety cabin - Pneumatic blowing of table - Central table lubrication - Extraction connection diameters: 3 x 120 mm, 3 x 150 mm - Dimensions (LxWxH): 5,300 x 1,700 x 1,800 mm - Weight: 5,000 kg ADVANTAGES – Italian manufacturing – 6-head configuration – Suitable for wet and dry timber – Pneumatic cabin opening – Pneumatic table blowing – Spindles 4 and 5 adjustable electrically – Used planer, in very good condition Net price: 136,900 PLN Net price: 32,600 EUR (depending on exchange rate, 4.2 EUR) (Prices may change with currency fluctuations)

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls Fodpfoyh N Agsx Afnsfu - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AB00022255, working height: 250 mm, table length: 520 mm, table width: 900 mm, feed roller diameter: 67 mm, blade shaft diameter: 120 mm, TECHNICAL DETAILS Table dimensions: 520 x 900 mm Working height: max. 250 mm Working height: min. 3 mm Tersa cutterhead: 520 mm with 4 knives Cutterhead diameter: 120 mm Feed roller diameter: 67 mm Feed speed: 5 / 8 / 12 / 18 m/min MACHINE DETAILS Main motor power: 9 kW Fodpfx Aoydc Ecefnsfu Weight: 1,058 kg EQUIPMENT Pneumatic table adjustment Electronic thickness table height adjustment via positioning control Tilting fence including auxiliary fence for strips

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Fjdpfxoydc Abj Afnsfu Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Fodew Dcccspfx Afnefu

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Ffodpfx Ajw Dcb Sefnsu

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Ffjdpfx Afexqtvqenju