Used Scm Superset 23 for sale (602)

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Hedpfx Aevyuqfjcvek

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) Hodexxkt Aopfx Acvok • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AA2/004283, functionality: fully functional, working width: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Planer block diameter: 120 mm Number of knives: 4 Electrical data Voltage: 400 V Connected load: 10 kVA General information Year of manufacture: 2017 Weight: 3,350 kg EQUIPMENT - Documentation available - CE marking present Hjdewkq Ndepfx Acvek

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Type: Moulder and Planer Hedpfxeyapi Hj Acvok If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Hsdpfx Aow Iddzecvek Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm 8 shafts Table 1500 mm Hedpotyfiijfx Acvsk Feed rate 6-36 m/min Composition : Horizontal lower 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Vertical left 40 mm 7.5 kW Vertical right 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal sup 40 mm 7.5 kW Horizontal lower 40 mm 7.5 kW Universal 40 mm 7.5 kW SUPERSET quick adjustment of tool diameters 2nd straight indexable spindle moulder Drive in the table + short wood Ideal for high finishing, joinery, planing and profiling of shutters, mouldings Power and Motors Pluging: Three-phased Overall dimensions Lenght: 6000 mm Width: 1200 mm Weight: 5200 Kg

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Hjdpfx Aox E T Dmjcvek

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- Hodpfxjwwl Nlj Acvok - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Technical data: Track width: 500mm Max cutting height: 120 mm Smooth feed adjustment Automatic lubrication system Anti-reflection protection Culag Safety switch Main engine power: 45 kW Power: 380V Hodpfjl Eyfqsx Acvsk Overall dimensions: Length: 2500mm Width: 2200mm Height: 2360mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, planer shaft diameter: 40 mm, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw Hjdoyfm Ttopfx Acvok 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: used, Year of construction: 2000, functionality: fully functional, working width: 230 mm, input voltage: 380 V, SECOND-HAND 4 SPINDLES MOULDER SCM MOD. COMPACT 23K Composition - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left Hedpfx Aox Rn Ukjcvek - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

Condition: like new (used), working width 230mm working height 120mm 5 heads head arrangement bottom 5.5kW right 5.5kW left 5.5kW top 7.5kW bottom 5.5kW head speed 6000 rpm head adjustment in two axes smooth feed speed adjustment year of production 2001 power supply 400v Hjdpewlk Ebjfx Acvjk

Condition: like new (used), Year of construction: 2000, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/bottom/uni spindles speed 6000 RPM two axes heads regulation pneumatic pressure of feeding rolls variable regulated feeder year 2000 Hodpfx Ajqffa Nscvsk

Condition: ready for operation (used), working width 240mm working height 120mm Hodpfx Acew Afgusvok 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM two axes heads regulation spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm max diameter of tool: 200 mm Hjdpsw Aflqjfx Acvsk motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls year: 2010

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Four-sided planer/moulder with 6 spindles, fully refurbished in 2025 (zero operating hours post-refurbishment), manufacturer SCM, Superset model. This professional industrial equipment delivers high-precision solid wood processing, ideal for workshops or factories seeking superior performance and long-term reliability in solid wood machining. The machine represents a modern technological solution, originally manufactured in 2003 by renowned Italian producer SCM, and brought up to current standards through a thorough refurbishment—zero operating hours since overhaul. We guarantee quality and operational safety, comparable to a new machine. Main technical specifications: Maximum working width: 240 mm (adjustable from 15 mm) Maximum working height: 160 mm (adjustable from 10 mm) 6 independent processing spindles, each with its own motor and electronic braking First lower horizontal spindle: 5.5 kW, Ø 40 mm, 8300 rpm Right vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Left vertical spindle: 5.5 kW, Ø 40 mm, length 170 mm, 8300 rpm Upper horizontal spindle: 11 kW, Ø 40 mm, length 170 mm, 8300 rpm Second upper horizontal spindle: 13.8 kW with inverter, Ø 40 mm, length 170 mm, 10,000 rpm Second lower horizontal spindle: 5.5 kW, Ø 40 mm, length 240 mm, 8300 rpm Feed System: Cardan shaft transmission, each unit equipped with its own feed roller and universal joint Hodpfx Aow Emlwocvek Feed motor: 4 kW with electronic brake Continuously variable feed speed with frequency inverter: 6–30 m/min Upgraded electric cabinet with advanced safety systems and improved ergonomics for easy operation and maintenance. Main advantages: High precision and versatility for ripping, planing, and profiling solid wood, regardless of complexity Reliability assured by complete refurbishment and premium-quality components Optimized cost compared to new equipment, with no compromise on performance Financing option: 5-year leasing for flexible investment management Recommended applications: Production of tongue and groove boards, solid wood flooring, beams, battens, planks, mouldings, and other solid wood products Ideal for carpentry workshops, joinery factories, manufacturers of doors, windows, furniture, industrial production of finished lumber

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,500 mm, Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Hedjwnhk Tjpfx Acvok Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Very neat SCM Olimpic K 230 evo edge bander. Includes extraction pipes with branches up to the shut-off valve. Extra options: - Rounding unit - Nesting sensors Hsdpfxsyxhqne Acvsk - Riepe bottles at 3 positions - Glue scraper unit Technical specifications: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge banding thickness in strips mm: 0.4 – 3 - Edge banding thickness on coils (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for trimming mm²: 135 - Coil holder diameter mm: 780 - Max. edge band projection relative to the panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - For edge banding in coil or strips mm: 160 (140*) - For solid wood strips mm: 220 (140*) - Min. panel width for edge banding on coil (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) Hjdjyymz Ujpfx Acvjk ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Hedeg Umrmopfx Acvjk Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 1,250 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, workpiece weight (max.): 200 kg, number of axes: 4, number of slots in tool magazine: 20, controller manufacturer: ESA, total height: 2,700 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 2,500 kg, table length: 3,050 mm, table width: 1,250 mm, Equipment: CE marking, Well-maintained machining center with extensive equipment. Milling motor 6.6 kW HSK 63 F 8-position quick-change tool magazine Hodpfxoyurxao Acvok 10-position tool magazine 4th axis Horizontal lock processing unit with two outputs, 4 kW Drilling unit with 12+6 drills Saw along X-axis Laser for vacuum gripper position display Automatic lubrication Remote control

Condition: used, Technical data: Hjdpomiik Tsfx Acvok Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: excellent (used), Year of construction: 2014, TECHNICAL DATA: Hodsyk At Hjpfx Acvsk Working width: 230 mm Working height: 120 mm Five heads Spirally arranged insert cutter heads Head arrangement: bottom/right/left/top/bottom Infeed table length: 2500 mm Electric height adjustment Variable feed speed Pneumatic material pressure Motor with integrated brake Head speed: 6000 rpm Total weight: 2000 kg Motor power: 5.5 kW/7.5 kW/7.5 kW/4 kW Year of manufacture: unknown

Condition: used, functionality: unexamined, Ferwood Code: RS0000797 - Manufacturer Code: 2987540023L - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Hsdpfx Acovvad Novjk

Condition: ready for operation (used), Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Hjdpfswh Szvjx Acvok Year of manufacture: 1999 Weight: 2320 kg Voltage: 400 V