Used Schaublin 12 for sale (62)

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lredsw N Rh Aepfx Adqoi Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Lodjcug H Sjpfx Adqeri Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Lrjdpfecpznhex Adqsi Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder Ljdpfxod Htvds Adqeri 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Lrjdpfx Asd Dgdyodqoi Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Lrodscuhvuspfx Adqji Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories Lrsdpfxow Nnute Adqsi MARCELS MASCHINEN CH

Condition: used, TECHNICAL DETAILS Lrsdpjw Ihttsfx Adqji - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: used, TECHNICAL DETAILS Ledjw Ihtyspfx Adqsri - see photos

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] Lrsdouhbw Nspfx Adqoi - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: excellent (used), Very good condition + lots of accessories Lrodpew R E Tcofx Adqoi

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. Lrodpjwqxcxofx Adqsi 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo.