Used Scan Max for sale (26,157)

Condition: used, self centering hub (5146) Make WMW maximum 2800 RPM. Podpsdb Uzxjfx Acvsgi

Condition: used, mileage: 482,334 km, power: 368 kW (500.34 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, The price does not include VAT and transfer of ownership. We invite you to verify the characteristics of the published vehicle. Lodotruck s.r.l. disclaims any liability for any unintentional inconsistencies with the description in the ad. Pedpfx Asyadcbocvjgi

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: Pgsdpfx Acjxarl Njvsi - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) Pgsdpfx Acoxbmpfovsi * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) Podpjxarlvsfx Acvsgi * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear undercarriage: * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Pgjdpfx Aoxbmprscvei Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: used, mileage: 109,050 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,035 mm, total height: 2,293 mm, loading space length: 3,400 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4697 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best prices under . Largest selection – lowest prices. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top Condition! First owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service due in 644 days Brake pads in new condition, front and rear Automatic transmission Body: Deep-freeze box Thermo King V500 MAX Refrigerant R-404A Standby cooling + engine-powered cooling According to the manufacturer (Thermo King), the refrigeration unit can ideally reach temperatures down to max. -20°C. Whether this is achieved depends heavily on usage and circumstances and is not guaranteed (loading area size, insulation, frequency of door openings, ambient temperature, etc.). MBUX multimedia system (7" touchscreen) Navigation system for MBUX multimedia system Cruise control Active lane keeping assist Traffic sign recognition Attention Assist (fatigue detection sensor) Inductive smartphone charging tray (wireless charging) Automatic climate control (Tempmatik) Instrument cluster with color display Comfort driver's seat Rear portal doors ---- Podpeyg T Rhofx Acvegi Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot front under roof lining * 2nd battery (auxiliary battery) in cab * 3-button remote for central locking * Acoustic package * 13-pin trailer socket * Armrest, driver and passenger door * 1-pole battery isolator switch * DAB tuner (digital radio reception) * Driving assistance system: active lane keeping assist * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: traffic sign recognition * Chassis: stabilization level II * Electric parking brake * All-weather floor mats * 250 A alternator * Cruise control * Front cup holders * Grab handle, co-driver double seat (inside seat) * Grab handles, A-pillars * Additional main key * Inductive smartphone charging tray (wireless charging) * Flip-up lid for storage compartment * Flip-up lids for left/right storage compartments * Terminal strip for electrical connections (driver's seat base) * Automatic climate control (Tempmatik) * Instrument cluster with color display * Fuel tank: main tank 93 liters * Loading package, dashboard (additional USB ports and 12V socket) * Front engine PTO with bracket for additional coolant compressor * Navigation system for MBUX multimedia system * Fog lights with cornering function * Full wheel covers * Smoker's package * Spare wheel in running gear * Spare wheel holder under rear frame incl. jack * Windscreen wipers with rain sensor * Front mud flaps * Seat belt warning system (co-driver side) * Seat equipment: comfort headrest, driver's seat * Cab seats: co-driver double seat * Cab seats: comfort driver's seat * Cab seats: driver's seat with lumbar support * Lockable storage compartment above windscreen * Socket (12V) in the cab * Red fuel cap * Cut-off relay with battery

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) Psdpfx Acsyhkq Uevsgi * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform Podpfx Aeyhkrrecvsgi

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Pgodpfeyhkqzjx Acvsi Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: excellent (used), Year of construction: 2013, volume flow: 2.05 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, FINI K-MAX 20-10 Screw Compressor The compressor is completely new. Podpfx Acjyui Aiovsgi Motor: 15 kW Capacity: 2.05 m3/min Pressure: 10 bar Year of manufacture: 2013 Operating hours: 2 h The compressor is fully operational.

Condition: used, mileage: 460,000 km, power: 2,299 kW (3,125.77 HP), first registration: 09/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant Internal ID number: [3028] Notice for interested parties: Dear customers, please note that we preferentially sell our vehicles to business customers, dealers, or export clients. ---- Optional services available: * 12–64 months warranty (valid EU-wide) * New inspection service * New MOT & emissions test * Nationwide delivery * Financing possible without down payment ---- * 19% VAT deductible * German vehicle * Regularly maintained * Refrigerated box body * Thermo King V300 Max cooling unit * Digital tachograph * Cooling available when stationary and in transit ---- Leasing or financing required? We offer attractive conditions – also available with no down payment! Please feel free to contact us. Contact: Pgodpfjx S Ubtjx Acvei Telephone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding and serves solely as a general description of the vehicle. Errors, misprints, and prior sale excepted. The binding condition of the vehicle is defined exclusively by the purchase agreement signed in person at our premises or by written confirmation. Vehicles with a mileage of over 50,000 km or older than 3 years are preferentially sold to our business customers.

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Pgsdpfx Acoxbq Dyevji Prices subject to part required.

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm Podpfxoxabnte Acvogi - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Pjdpfx Ajxzgw Aocvegi Width 29.7 in.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, warranty duration: 9 months, type of input current: AC, input voltage: 230 V, overall weight: 52 kg, arm reach: 2,500 mm, number of axes: 7, FARO Quantum Max Arm, X.S, 2.5m, 7 axes (premium model, portable 3D measuring arm) with LLP Price excluding VAT Demonstration unit from October 2024 with manufacturer’s warranty until November 2026 Arm weight: approx. 8 kg; including all accessories, total weight is around 52 kg Serial no. arm: X25S52452233, serial no. LLP: LLP0P2443474, serial no. tripod: 42949 Scope of delivery includes: - FARO Arm Quantum X.S, 2.5m, 7 axes (demo device, 10/2024) - Calibration set - Transport case - Mounting plate - 3mm and 6mm iProbes - USB cable, power supply, 230V Swiss plug - Rechargeable battery - Laser Line Probe for scanning function, FAROBlu xP including calibration set and case - FARO folding tripod - Manufacturer’s warranty until 11/2026 Optional: FARO software available at extra cost after consultation to meet your needs Pgodpfxsymlybo Acvei Quantum Max X.S: This is the premium model, delivering industry-leading precision. It is designed for companies that require uncompromising accuracy and performance for their most critical applications, tightest tolerances, and certification processes. The Quantum Max Arm ensures exceptional accuracy and repeatability, making it ideal for solutions in critical quality control tasks, inspections, CAD comparison, reverse engineering, and as-built documentation. The arm is flexible for use both in production (shop floor) and in dedicated metrology labs. The 7-axis model offered here extends its functionality with an additional rotary axis (often at the arm’s wrist). This seventh axis provides enhanced flexibility and maneuverability, especially beneficial when a laser scanner is mounted to the arm. It enables easier movement of the scanner around obstacles and efficient, complete scanning of complex-shaped surfaces. The Quantum Max Arm is compatible with various probes and laser scanners (the FAROBlu® LP is included in this package), highlighting its versatility for diverse inspection requirements. Its intuitive software and user-friendly hardware allow for quick familiarization and efficient workflows. Custom-fit measurement accuracy: X.S: Industry-leading, highest precision for critical applications and tightest tolerances. Versatile configurations (axes): 7-axis arm: Additional flexibility and maneuverability, ideal for use with mounted laser scanners and capturing complex geometries. Rugged construction: Engineered for reliable operation in harsh industrial environments with integrated protection against temperature, vibrations, and overload. Portability: Lightweight and portable, enabling measurements directly on the shop floor, in the lab, or on-site—reducing transport time and costs. Wide range of applications: Ideal for dimensional analysis, CAD comparison, quality control, as-built documentation, reverse engineering, component inspection, and certification. Compatibility with various probes and scanners: Adapts to specific measurement requirements (touch probes, laser line scanners). Easy operation: Intuitive user interface and ergonomic design for quick training and efficient workflows. Enhanced data quality: Provides detailed and accurate 3D data for well-informed decisions in manufacturing and quality assurance.

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCTP64XSA95480, mileage: 201 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, empty load weight: 8,799 kg, maximum load weight: 10,201 kg, overall weight: 19,000 kg, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, CO₂ emissions: 46 g/km, fuel tank capacity: 1,350 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 6,003 mm, total width: 2,540 mm, total height: 3,917 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, navigation system, onboard computer, parking heater, power assisted steering, power mirror, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, NM0KCTP64XSA95480 – Reference QT-025 STANDARD EQUIPMENT: Pgodpfx Acjycg Hnjvoi 2-bag air suspension (C2AS) ▪ Air-suspended cab ▪ Automatic climate control ▪ Sleeper compartment remote control ▪ Black grille ▪ Exterior mirror covers in body color ▪ Front bumper in body color ▪ Engine hood in body color ▪ Cruise control & speed limiter ▪ Driver's seat – heated & air-suspended ▪ Dry air cab heater ▪ EBC (electronic braking system) ▪ Electrically heated and adjustable mirrors ▪ Electrically operated sliding roof ▪ Front & rear underrun protection ▪ Extended front bumper ▪ Switchable air compressor ▪ Maintenance-free front wheel bearing ▪ Wheel chock ▪ DAB radio ▪ 2.64 FDR ▪ 210 Ah (AGM battery) ▪ ECO+ mode OPTIONAL EQUIPMENT: 1100mm fifth wheel height ▪ 8T front axle ▪ 750+600L fuel tanks ▪ Exterior sun visor ▪ Double bed ▪ Technology Pack 4 Find our dealers via the website fordtrucksbelux.be Interested? Feel free to contact us: - Herman Noyens Trucks NV

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Pgsdpjg Sk T Djfx Acvoi Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container

Condition: new, Year of construction: 2025, The Senfeng H1 is Senfeng's best-selling model! This is our entry-level fiber laser with interchangeable table, suitable for a power of 1 to 6 kilowatts, this can process up to 25 mm of steel Ideal for the entrepreneur with a medium to large production requirement. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 6,000 W - Laser Wave length: 1020 nm - 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 1.2 G - Maximum simultaneous axes speed: 130 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 6,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: Pgjdpjvty N Tsfx Acvji - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 6,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, laser power: 3,000 W, The 1530G is the ideal middle ground. This compact model saves a lot of space in your workshop due to the absence of a change table. At the same time, large format plates can be processed on this machine. Ideal for the entrepreneur who has a low to medium production requirement with a small floor space. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 3,000 W - Laser Wave length: 1020 nm – 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 0.8 G - Maximum simultaneous axes speed: 80 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 4,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== Podpfxevty E Uo Acvogi In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 3,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: good (used), Grinding machine, angle grinder, for chipper knives, planer knives, saw blade grinder, lathe grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Chuet Nevers, tool grinding machine Pgjdji En Dxepfx Acvei -Speed: 3000 rpm -Grinding wheels: Ø max. 200 mm -Accessories: included, see photos -Dimensions: 680/590/H1560 mm -Weight: approx. 121 kg

Condition: good (used), Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm Pedpfx Acstu Rktsvogi -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Condition: good (used), Grinding drum, deflection drum, belt grinding machine, belt sander -Drum is for a husband grinder -Drum width: 170 mm -Drum: Ø 200 mm -Eccentric adjustment with touch clock -Number: 2x drums available -Price: per piece -Dimensions: 200/290/H280 mm Pgodeb A S S Uopfx Acvji -Weight: 13 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Pgjdpeb A I R Dofx Acvei -Grinding discs: max. Ø 360 mm x 40 mm -Operating voltage: 380 volts -Dimensions: 760/450/H1080 mm -Weight: 200 kg

Condition: excellent (used), Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades Pgodpfsb A Rz Aex Acvsi -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg