Used Sanding Polishing for sale (3,910)

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 2 mm, feed rate X-axis: 12 m/min, total height: 1,300 mm, total length: 4,500 mm, total width: 650 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, TECHNICAL DATA Overall dimensions (mm): 4500*650*1300 mm Total power: 9.37 kW Feed rate: 12 m/min Thickness of the component to be veneered: 10–45 mm Thickness of the veneer: 0.8–2 mm Length of the component to be veneered: ≥80 mm Width of the component to be veneered: ≥60 mm Working pressure: 0.6 MPa Weight: 1300 kg SPECIFICATIONS: Delta touchscreen (7 inches) Preliminary milling Gluing Edge trimming unit Finishing milling Corner rounding Radius sanding Dodpfezhvggex Ac Ujwb Polishing unit Frequency inverter

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Dodezqgg Aopfx Ac Ujwb Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblasting Machine Dwsdpfx Acew H N R So Ujb The KDP350 cabinet sandblasting machine is an efficient device designed for cleaning and surface treatment of metal components. It is dedicated to professional workshops, industrial plants, and refurbishment service centers. The 330-liter working chamber and two side doors with perimeter sealing provide convenient access to the working area and ensure dust-free operation. The machine is supplied with a DC15 cyclone dust extraction system, which effectively removes dust generated during the blasting process. The KDP350 is an ideal solution as a wheel sandblaster and for cleaning metal components requiring precise abrasive treatment. Main Advantages of the KDP350 Sandblaster Large working chamber – 330 liters of capacity allows processing larger components. Two side doors – located on the left and right side, making loading and handling of workpieces easier. Dust-free operation – thanks to sealing gaskets and dust extraction ports with diameters of Ø63 mm and Ø90 mm. Sandblasting gun with ceramic nozzles – 4 interchangeable tips (4, 5, 6, and 7 mm) provide precise blasting performance. Working area lighting – improves visibility and accuracy during operation. Protective gloves integrated into the cabinet – wear-resistant gloves protect the operator’s hands. Compatibility with various abrasives – including quartz sand, glass beads, silicon abrasive, emery, and plastic granulate. Precision, Efficiency, and Versatile Applications The KDP350 cabinet sandblaster is suitable for removing rust, paint, scale, and technological deposits from metal, steel, and aluminium surfaces. It is an excellent solution for sandblasting: aluminium and steel wheels, engine blocks, hinges, machine housings, and other components requiring precise abrasive surface treatment. Adjustable operating parameters, including pressure from 4–8 bar and air consumption of 400–700 l/min, allow the machine to be adapted to different materials and abrasive types. Dust Extraction System – DC15 Cyclone Extractor The KDP350 is supplied with a high-performance DC15 cyclone dust extraction system, which efficiently separates dust and fine particles generated during surface treatment. The integrated filter and flexible connecting hose provide comfortable and safe operation, maintaining cleanliness inside the cabinet and in the surrounding workspace. Thanks to cyclone filtration technology, filter service life is extended and the need for frequent replacement is reduced. Standard Equipment DC15 cyclone dust extractor with filter and hose 12 V fluorescent lamp (230 V power supply with switch) 2 integrated rubber protective gloves Sandblasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: Ø63 mm and Ø90 mm 2 side doors with perimeter sealing gaskets User manual in Polish Technical Specifications – KDP350 Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Doors 2 pcs. (left and right side) Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg Note: The machine is supplied in parts and requires self-assembly according to the included instructions.

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. Dwedpfx Acozlubds Uob It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Dodpfozbyt Eex Ac Uswb Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Dwedpfxozv Eaxo Ac Usb Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Year - 2016 CE. Dodpfxszd Uzhs Ac Ujwb

Condition: used, functionality: unexamined, Complete Sand Wash Plant (Trio / Siltbuster) Complete sand wash plant to include: Lamela Siltbusters Trio log washer Trio sand washer Dwodpfx Ajy Drtkec Ujb Trio shaker 700kva generator All assoicated pumps, conveyors, tanks, power packs, framework. Note - partially decommissioned for potential relocation.

Condition: used, Year of construction: 2016, Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V Overall dimensions: Length: 1400mm Width: 1520mm Djdpfezd Uzzjx Ac Uowb Height: 1800mm

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Dwedpfx Ajx N A Aajc Ujb Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us. Dodjzx Tgrjpfx Ac Ujwb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Dwodszwqyyspfx Ac Ujb Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! Djdpfx Acsy Sap Aj Ujwb The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm Dsdpsxlr U Isfx Ac Ujwb - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm Dwedoxaaabjpfx Ac Usb threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase * Frequency: 50 Hz Dwsdpfozl Slaex Ac Uob * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities.

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Dwsdpfx Acozxz Tao Ueb Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: used, Year of construction: 2011, total width: 900 mm, total height: 1,640 mm, total length: 1,000 mm, Blasting cabinet SBC 350, manufactured in 2011. Cabinet model on a chassis with a front door, viewing window, and two round glove openings. Control panel with switches for Power, Light, and Dust, indicator lights, a pressure gauge, and an air pressure regulator. Hose and pipe connections on the side. Technical specifications: - Year of manufacture: 2011 - Design: cabinet model on a chassis, front door with viewing window - Work openings: 2 glove openings - Control panel: Power / Light / Dust, pressure gauge, air regulator Dodpfx Acjzzn Txo Uewb - Dimensions: approx. 100 x 90 x 164 cm The machine is sold in its current condition (used, from a bankruptcy, Apeldoorn, Netherlands). Dismantling, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing their own tools, lifting/loading equipment, and packaging. Inspection by appointment is possible.

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm Dsdpfx Acozvuy Is Uewb • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Dedpfxozvy A Ue Ac Uswb

Condition: good (used), Dust extraction unit, extraction system, self-cleaning vacuum filter, absorber, dust collector for extracting graphite, metal, mineral, hard fiber, flammable, hazardous, and toxic dust, and for the effective collection of process dust, blasting dust, sanding dust, grinding dust, polishing dust, and all types of dry dust. The extraction unit has explosion hazard classes ST1 and ST2. The vacuum fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Filter cartridge – multi-pocket design. 11 kW fan in a sound-absorbing housing. Capacity: 3500 m3/h. Vacuum: 7000 Pa. Filtration area: 24 m2. Dwsdpjg Rhfbofx Ac Usb Automatic filter cleaning with an electric motor. The extraction unit was used during graphite processing.

Condition: new, Year of construction: 2026, Motor: 4 kW Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Dwodpfozzk Aijx Ac Ujb Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust.

Condition: used, Second-hand machine Year of manufacture: 1988 Condition: well-maintained Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm Dwjdpezk Ny Ejfx Ac Ueb - Tilt adjustment of the work tables: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH Dwsdpezydafefx Ac Usb - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, functionality: fully functional, SCM 900 RT Wide Belt Sander Specification: • Condition - used, after a comprehensive inspection, calibration, and replacement of all seals • Manufacturer - SCM • Model - 900 RT • Working width - 900 mm • Maximum working height - 160 mm • 1 combination sanding unit (hard roller with 200 mm diameter + sanding pad) • Main motor power - 7.5 kW • 2 machine feed speeds • 2 conveyor speeds • Analog thickness indicator for the workpiece • Pneumatic oscillation • Abrasive belt size - 2300 x 900 mm • Weight approx. 1200 kg • Overall dimensions: 185 x 155 x 210 cm (L x W x H) Dodpfx Acsyy Ngyo Uswb Additional Information: • The machine is in good technical condition and ready for immediate use • The photos shown reflect the actual condition of the sale item • Possibility to switch on and inspect the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organize transport using the MDD fleet, courier companies or external carriers • We offer financing support in the form of leasing or lease-loan